Пікірлер
@Devlinpaige 25 күн бұрын
This video saved my whole day! My faucet completely stopped working. Turns out it was blocked 🤢
@RogDawg Ай бұрын
Stupid music. Couldn’t watch.
@dawsonmobley Ай бұрын
Thanks! I was having no luck finding that diverter seal for my Delta sawyer spout...your video was a huge help with the danco part number. Now I just have to figure out how to get the diverter off this Delta Sawyer tub spout without breaking anything so I can replce the seal. It has a blind pin holding the pull "knob" onto the shaft with very little room to grab it and work it out.
@DaveHiatt-s5v 2 ай бұрын
Thank you, VERY helpful
@isabellebrn2224 2 ай бұрын
Thank you so much for your help! my daughter and I just fix it for $6,43!
@diaxpora 2 ай бұрын
Thanks for the video, what size belt did you end up using in the end?
@mikeshomemaintenancenstuff7030 2 ай бұрын
I bought a bag of belts on Amazon - since it was so old I just tried one until I was happy with the fit - Rubber Square Belt 40-135MM - Amazon link a.co/d/6hCjLmU
@diaxpora 2 ай бұрын
@@mikeshomemaintenancenstuff7030 Thank you
@RetroRespawn 3 ай бұрын
Heh. I don't believe it. I just bought this exact model of Walkman, and the drive belt, I suspect, has just given out. What luck that I should find this video. Thanks! Gives me some hope that I can fix this.
@ThiagoLima85 5 ай бұрын
I got one, gorgeous device. Mine is constantly muted. Do you have any idea what cause it? Thanks, nice job!!
@BruceBaker-t9h 6 ай бұрын
This video saved me a plumber bill. It is the same spout as the Delta that I have. The only difference was the adapter going to the water supply, but that was of no consequence to the repair. Keep up the good work!!
@silverrune17 7 ай бұрын
Thanks Mike
@roxasheart6740 9 ай бұрын
Omg thank you! You fixed my faucet. I was going crazy.
@turbopassat 9 ай бұрын
Thanks for the detailed video. Iam having trouble removing the plastic cap, after removing the handle. Used channel locks with cloth / electric tape to grip. It still stripped the plastic cap but it is not loosenings😮
@joselatorre1575 9 ай бұрын
Seriously,, just can’t explain it verbally along with the video?
@sandraanderson5689 10 ай бұрын
❤ it. I’ve had 2 different plumbers out here for variety of things and fixing the diverter was one of them they never accomplish this goal. I couldn’t take fighting with it any more. Thanks to your video and $7.49. I did myself. Success. Thank you!
@CareAgainFishing 10 ай бұрын
Thank you for creating this video. You really helped me out a lot!
@jj987987987 11 ай бұрын
Service manual service manual service manual, go look up for the service manual so you don’t have to poke around. It literally tells you where the claws are at and gives you the exact steps to disassemble it.
@niicer 11 ай бұрын
Thank you, I didn’t need new parts but helped me fix the problem. I just washed everything good, put it back together and it’s working properly now. Thanks 👍🏻
@rcboals 11 ай бұрын
Thank you for taking the time to do this. Delta website is not very user friendly. You helped me save the cost of a plumber.
@prand-c7f 11 ай бұрын
So helpful! Black rocks came out ..thank you for showing how to do it!
@aqtrubz Жыл бұрын
i want to thank you for your tutorial you helped me a lot it made my job easy
@nick196642 Жыл бұрын
the music is annoying
@kelseybusby3927 Жыл бұрын
Thank you!!!! Wifey here. You gave me all the info I needed to take it apart, order the new parts, and reinstall myself without having to pay someone to do this or worry my husband with it! Thank you!
@chezthegreat Күн бұрын
Only valid use of the phrase girl boss
@Calibir1 Жыл бұрын
Most of what you are doing in this video is partly off screen.
@PeaceChanel Жыл бұрын
Thank You for All that you are doing for our Planet Earth.... Peace.. Shalom.. Salam.. Namaste 🙏🏻 😊 🌈 ✌ ☮ ❤
@istrue2 Жыл бұрын
One of the best I've seen. Excellent tip for the 17mm bolt. Thank you!
@harunrashid5634 Жыл бұрын
It is very beneficial. It would be even better if you explain little bit about washer replacing. Thanks.
@jaygriffin4164 Жыл бұрын
Very helpful. Thank you for taking the time to make this video.
@annh53 Жыл бұрын
Music is distracting and annoying
@lolasmith8912 Жыл бұрын
I am having problem trying to remove the screw with an Allen wrench in the handle. The screw are way too tight. I have tried using WD40 to lime away. Yet it’s still not coming off…. Any suggestions will be helpful. Thanks
@DaveRosenthal-h4m Жыл бұрын
Thanks for this. If the top handle is stubborn and won't unscrew from the metal pin, you can still disassemble the diverter without removing that handle. See kzbin.info/www/bejne/sJ-shJaIqK93d6M I had to do it this way and it was easier than expected to reassemble after subjecting the disassembled parts to a two-minute CLR bath, which is all I needed to get the diverter to function properly again.
@Prentice3 Жыл бұрын
Excellent video. I have a similar Delta faucet, and Delta customer service sent me replacement valves for both sides. They are the same part number as the valve in your video. The two replacement valves are identical with nothing indicating left or right, so I am assuming that is why you emphasized taking a picture of the old valve before removing it and then matching the position of the replacement valve at installation time. Also thanks for the demonstration on cleaning the mineral build-up using CLR.
@LynTrombley Жыл бұрын
Your hands move out of view of camera at multiple points so we cannot see what you are doing so somewhat helpful.
@beeps81 Жыл бұрын
This is SO HELPFUL! Thank you!!!
@khronhun Жыл бұрын
What size is the belt? Thanks!
@annh53 Жыл бұрын
I agree with the music comment It's annoying and ruins a helpful video I had to mute it to watch but needed to hear instruction so gave up looked for a different video
@bruceleehee9267 Жыл бұрын
🙌🏽
@christopherdyson5212 Жыл бұрын
Adjust your camera
@donnaastiz5072 22 күн бұрын
No way to do that they I can see.
@davidbell4548 Жыл бұрын
This Sony WM4 walkman is similar to the Sanyo M4440 walkman which is in red
@yenlee6814 Жыл бұрын
Do you need to shut off the main water line before removing the tub spout?
@mikeshomemaintenancenstuff7030 Жыл бұрын
No, the water is already cutoff at the tub handle. Cheers
@yenlee6814 Жыл бұрын
@@mikeshomemaintenancenstuff7030 Thank you
@Scott-wd5mk Жыл бұрын
Great video. Thanks for sharing
@zoranmaksimovski2755 Жыл бұрын
This little kzbin.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
@markogrba1 Жыл бұрын
Why not just use struts with a spring preassembled? They're called quick struts I believe. More money but much less worry and work.
@labpartnerlp Жыл бұрын
They're generally far less quality, both the strut and the spring. The OEM spring generally resists rust and last forever. I've put on aftermarket moog springs that have rusted out after 2 years.
@tomy2t0ne3 Жыл бұрын
I just replaced my struts with kyb preassembled struts and I've had nothing but trouble. The struts began binding as soon as i drove it out of the garage. I unfortunately threw away the original struts so now I have to figure out how to make mine work. Like he says, rebuild your struts and use as much of the original equipment as possible.
@davidz8286 Жыл бұрын
Good video . Just needed help with the pull up diverter assembly, but may do the whole thing now. Thanks. 👍
@leonardocosta6038 Жыл бұрын
can you use liquid nails instead of the wood filler?
@bigD2033 Жыл бұрын
Question why how vome u didnt spray clr inside the pipe but instead sprayed it on the napkin and left it on for 3 hrs. Is it harmful to spray it inside. Also i read that its bad to leave this stuff for longer then 2 minutes. Can u tell me a bit more about how u use clr?
@joshuapalmer6594 Жыл бұрын
Thanks for sharing. Simple how to videos are the best.
@mailbagman Жыл бұрын
Great video, thanks took less than 20 minutes. Make sure you have some WD-40 and CLR to loosen things.
@doowoprichie 2 жыл бұрын
What if it only has a diverter valve divert valve on the wall plate it leaks from the spnd thedivverter?
@austinjwb 2 жыл бұрын
Thanks for the video, I’ve got a slipping belt, I can’t find a service manual anywhere for this boombox, did you happen to use 2mm or 4mm flat belts? Thank you!
@mikeshomemaintenancenstuff7030 2 жыл бұрын
145mm x 4mm
@austinjwb 2 жыл бұрын
Okay, I have a bunch of 4mm flat ones coming in from a USA shipper, also sorry I just realized you said the size in text on the video. Even after watching it all the way through I managed to miss that haha. Thanks for your response!
@jeffduncan02 2 жыл бұрын
Your spray ring trick with the bolt won't work for the design of my particular Delta :(
@chester8420 Жыл бұрын
Yep. Mine is smooth inside too. But there is a screw hidden behind the switch. Once you pop the switch off, the Phillips screw is easily removed. The assembly pops out the front like his on the video.
@xenidus Жыл бұрын
@@chester8420God youtube is awesome. This was exactly what I needed answered. Secret screw!
@gpurve27 11 ай бұрын
@@chester8420 thank you for your information.
@himikeb1 7 ай бұрын
On this model where it’s smooth in front, gently pry up on the switch from the HOSE side of the head. Remove the Phillips head screw and slide out front. To remove plunger, use a thin small flat head screwdriver to slide the clip out to the side (easy to see once apart). Then you can slowly and gently pull out plunger assembly. Clean as described. Slowly but firmly push plunger until it slides out of surrounding case. Clean. I then put JUST A LITTLE food grade silicon lube on the plunger assembly as it was still not moving smoothly after cleaning. After that, it’s working quite well now. You can actually test pretty easily without reassembling the entire spray head.
@donnaastiz5072 22 күн бұрын
@@himikeb1 this was helpful to get the switch out, but now I cannot get the switch to fit back in once the spray head was cleaned out. The two prongs in front slide around the little piston, but the rear of the switch won’t pop back in.