I have an scx10ii aswell, did you just use axles and links from wraith to make it work. I would like to do the same
@williammiller950111 ай бұрын
Have you finished this build?
@martinnelson25663 ай бұрын
Have you finished the he build?
@paulthurston2883 Жыл бұрын
I had similar issues with both my front and rear bumpers. The cutouts for the lights are actually a few mm too wide, so now I have a small gap in the bodywork at the edge of each light. I followed the cut lines exactly too. The templates were lined up correctly. I'm bummed too.
@jesusrivero5471 Жыл бұрын
Love the rig! What are those axles? I wanna make mine that wide as well.
@chrispenrod6854 Жыл бұрын
Where did you get the bobble head
@SnarkyRC Жыл бұрын
Lol the TRX4 has a Pitbull tires sticker on the windshield but, no Pitbull tires. Cool video nonetheless.
@phatheadrc Жыл бұрын
I appreciate it lol, I think I had the growlers on before the video was taken
@amos7073 Жыл бұрын
promo sm 🏃
@brucebartlett1950 Жыл бұрын
Get mip never a problem
@gloriamartin159 Жыл бұрын
😎
@gloriamartin159 Жыл бұрын
@gloriamartin159 Жыл бұрын
🏎
@jamesswift4641 Жыл бұрын
Good video killer crawler
@phatheadrc Жыл бұрын
Thanks man! I'm excited to try this out
@zachsteele6964 Жыл бұрын
🐐🐐🐐
@phatheadrc Жыл бұрын
Appreciate it Zach!
@bigjmartin7584 Жыл бұрын
Aye look who it is! Good to see you back!
@phatheadrc Жыл бұрын
Thanks man!
@natesinn5568 Жыл бұрын
Hey I love it! I have been trying to find one that looks nice what’s it called?
@Lokithefeline2 жыл бұрын
any modding needed to make the trx4 axles fit? im thinkin of just slappin both under mine.
@phatheadrc2 жыл бұрын
They just bolted right up if I remember correctly
@Lokithefeline2 жыл бұрын
@@phatheadrc did you have to fiddle with the pan hard mount or arm? or links?
@phatheadrc2 жыл бұрын
Yea that pan hard was the hardest part of the whole swap
@Lokithefeline Жыл бұрын
@@phatheadrc what did you do to it did you have to shorten it and how you did do that
@seanzampirro57602 жыл бұрын
Do you have a link for the build on this!?
@abelinkinxvi17352 жыл бұрын
500th sub! Truck looks awesome, I am loving mine, just got it this week. Personalizing is in order, body trimming for clearance. This truck is still highly relevant today.
@gregweyenberg84392 жыл бұрын
I love my sports. I've got 2. The tan one I've modded a bit and the blue one came with the traxx with a light kit installed. You've got a nice looking truck man
@3Dprint4you2 жыл бұрын
Dont blame the kit because you didnt cut straight. Always cut to the inside of the line and then adjust as needed. Measure twice cut once. Tape the back of the hole and use a little bit of bondo and it'll fix it right up. Dont take the comment negatively please. Love all your videos btw.
@phatheadrc2 жыл бұрын
Thanks for the input, I was just excited to get them on the truck lol, I appreciate the advice and I'm glad you love the videos. Sorry for the late reply
@JDobbs7262 жыл бұрын
John Johh is that Thors hammer on the passanger seat
@phatheadrc2 жыл бұрын
Yes it is!
@JDobbs7262 жыл бұрын
Actually it was to say Josh not John o well
@robm.68252 жыл бұрын
Nice rig. Are those proline shocks? Do you like them?
@phatheadrc2 жыл бұрын
Yea they are, I really liked them I could tell a slight difference in how the truck drove
@michaelzimmerman13612 жыл бұрын
Does it feel top heavy with the aluminum body on it?
@phatheadrc2 жыл бұрын
If I remember correctly it was pretty heavy and it looked cool but didn't crawl very well
@flipcivicvtec2 жыл бұрын
Nice course!
@phatheadrc2 жыл бұрын
Thank you, I appreciate it
@fernandocabral61933 жыл бұрын
I see you got a new body do you have any extra hood hinges I lost one on mine and in order to get them you need to buy a new body which I'll do if I have to do if you can help me out let me know thank you
@phatheadrc3 жыл бұрын
I would but I just re used the ones I had on the original
@fernandocabral61933 жыл бұрын
@@phatheadrc thank you for responding it means a lot oh so you didn't get the complete body kit that comes with other parts etc I'm going to keep trying Horizon should make it so that you can buy the parts tree they come on but they don't you have to buy the body kit just to get the parts tree the hinges come on it's really dumb ugh
@phatheadrc3 жыл бұрын
Yea idk why they don't sell them separately, I may have got the complete set but that was a few years ago so I may have lost them
@fernandocabral61933 жыл бұрын
@@phatheadrc yeah cause I know if you buy the body the grille and hinges and other parts come on the parts tree that comes when you buy the body I wasn't sure if it was always that way I'm so mad cause I'm still in the upgrading stage and haven't even ran the rig yet so it's still brand new
@phatheadrc3 жыл бұрын
Idk how you may like it but you could probably use zip ties until you find some
@tankerboypz12873 жыл бұрын
What tool did you use to cut the plastic?
@phatheadrc3 жыл бұрын
Some lexan scissors and a razor blade
@jmackinterests78092 жыл бұрын
I saw a video where a guy use a regular hobby knife and a blow torch. He heated the blade then made the cut. I haven't tried it yet but looks interesting and a good way to make clean cuts if careful.
@phatheadrc2 жыл бұрын
I never would've thought to do that
@csnocke53 жыл бұрын
Bobble head genius,I ve been working on head turning with servos. Bobble is very realistic
@phatheadrc3 жыл бұрын
I thought about using servos but it was getting tight with everything under there, so idk how I got the idea but I used a pen spring
@gloriamartin1593 жыл бұрын
The little micro machine has it's own race track ! A fun big tire ...
@charliecostagaming42353 жыл бұрын
topp
@RCPM18_4x43 жыл бұрын
Great vodeo my ftiend👍
@phatheadrc3 жыл бұрын
Thank you im glad you're enjoying the videos!
@gloriamartin1593 жыл бұрын
Cute little ride ! Nice to see it has a little driver ...
Just bought my self the exact beadlocks along with some patagonia tires does anyone have a clue how i could install them straight without them being crooked.... Im doomed 😞
@gloriamartin1593 жыл бұрын
Looks like you are chilling on the side of a little cliff ... Curious what is in the passenger seat ? Nice to view as always !
@phatheadrc3 жыл бұрын
Yea its a little drop off nothing crazy, thor's hammer is in the passenger seat
@RCPM18_4x43 жыл бұрын
Great👍👍
@gloriamartin1593 жыл бұрын
Following the lingo .... good crawl .....
@RCPM18_4x43 жыл бұрын
Great,, wow so cool my friend👍👍
@phatheadrc3 жыл бұрын
Thank you I appreciate it! I'm glad you enjoy the videos!!
@BigJMart1n3 жыл бұрын
Looks like the wraith does pretty good on steep climbs, good crawl!
@phatheadrc3 жыл бұрын
Yea it does pretty good, it was a little warm so the tires gripped perfectly, thanks for watching!
@RCPM18_4x43 жыл бұрын
Very cool👍👍👍👍
@phatheadrc3 жыл бұрын
Thanks im glad you enjoyed!
@RCPM18_4x43 жыл бұрын
🤗🤗🔔🔔🔔🔔👍👍🙏🙏🙏💯💯💯
@RCPM18_4x43 жыл бұрын
Wow nice my friend👍👍
@phatheadrc3 жыл бұрын
Thank you I appreciate it!
@BigJMart1n3 жыл бұрын
Cool video, short and sweet and looks cool
@phatheadrc3 жыл бұрын
Thanks you, im glad you enjoyed and thanks for watching
@OllisRCCars3 жыл бұрын
Amazing Video👌 I subscribed
@phatheadrc3 жыл бұрын
Thank you so much! I'm glad you enjoyed the video!
@gloriamartin1593 жыл бұрын
Nice area to crawl ... Looks like a little information park ...Glad your doing better ...
@BigJMart1n3 жыл бұрын
Glad everything is all healed up and that you're back to making videos, I like that driver it's different!
@phatheadrc3 жыл бұрын
Thank you I appreciate it! And I'm glad you guys like the driver I was a little hesitant
@phatheadrc3 жыл бұрын
Sorry for no videos I had a broken wrist and I was sick. My wrist is healed and I'm no longer sick, time to get out on the rocks again
@ozboy81443 жыл бұрын
Nice Slow Crawl 👍also cool little driver😁
@phatheadrc3 жыл бұрын
Thanks for watching! And I thought I'd do something different for a driver