8:54 pm can you make me a 3 D gear like you did to fix the big shot express

Thank you very very much you just saved me $300 for a new one

Thank you so much for making this video. I was able to unjam my machine. GOD bless you!

For toyota yaris 2012 I needed 14mm wrench

My machine is doing the same thing, will only take very small dies, one at a time, any more than that it just won't 'grab' the plates and makes a grinding sound so I fear I have the same issue. 😢 Would you be able to make a new gear from your 3D printer for me please? I will obviously pay you for your time and materials. If you could drop me a message about this I would be ever so grateful. I live in the Isle of Man. Thanks in advance! 🤞🏼🤞🏼🤞🏼😊

Thank you

Hi, I have the same problem. I would be grateful if you could help me with some technical documentation for this wheel so that I can find a way to build it for me.

ALL ABOARD THE [[Big Shot]] EXPRESS!!!!

scampton

Looks like all the other gears are metal. WHY would Sizzix use a nylon gear in such a crucial area and not a metal gear? Planned obsolescence?

Ditto! Would pay for that gear! My Sizzix is a large expensive paper weight!

Any chance you would sell some of those 3D printed replacement gears for anyone else with this same issue but no 3D printer?

Please turn off that piano I can't hear you

Hello sizzix can not help I have the same problem were can I get this little thing?

Good night, can you get the gear project? i have the same problem here.

much easier to undo the wheel nuts with a longer handled wrench. the ones that are supplied with the vehicle are next to useless

I don't know if you are still able to help with ebosser problems.I bought one recently at a charity shop and it worked beautifully 2 or 3 times. Now the motor keeps stopping, and of course the plates are then jammed. We have been able to unscrew as per your video and re-assemble, it will work once or twice and then jam again. This is getting so frustrating. Also a small cube of a white silicone type fell out (we think) and don't know where it belongs. I hope you can help as am getting desperate

Brilliant. I jammed up my embosser last week. Thinking will it be cheaper to buy a new cutter or send away to get repaired. Found your video on KZbin, watched 2 or 3 times,found my screwdrivers and a torch, hey presto within15 mins my machine was working, a quick clean up and job done. THANKYOU

you should put a piece of wood on the candle stick.duh

Thank you for the video, it worked up until a point however upon detaching the motor nothing budged and everything was seriously jammed so as a result (and as expected) it was beyond saving so it's off to buy a new (probably different model) for me.

Just wanted to say followed your directions and WhooHoo aworking ebosser. YEAH!

Do you know how to fix gemini embossed too? The big one.

Hadn,t seen this film before,watched to see if maybe me or my pals were filmed by accident,but sadly not.This was Ayr in its hayday,i was 13 at the time and attendingAyr academy,great to see the high street busy as always,and the harbour with fishing boats and the dredger on the northside,right in front off me grannies house,happy memories,greetings from Indiana ,USA,

Thank you for this video. I have a Gemini and watched your video before starting on mine. Took pictures at different stages in case I forgot how it was BEFORE I detached items....the plates pulled out easily and it was almost as easy to put back together...I am not all that mechanical, Ha Ha. Thanks again!

You guys forgot to do the most important thing which is let everybody know to put the E-brake on before you do everything

I think the axle stand was in the wrong position initially but he did put it in the correct position if you watch very carefully. Obviously the car has to be jacked around the jacking area so there is room for axle stand.

They start doing Yaris in 2007 if i remember correctly!

Thanks

u use factory or aftermarket, I never could find any aftermarket ones for the yaris.

Sorry did not work for me! I have the whole thing tore apart, gears will not move. Hopefully I can ger it back together and maybe the jam will reverse.

I want to thank you so much for this video. I just jammed my ebosser as I put the rubber mat on top and not in between the plates - I know very dumb move on my part. Your video helped walk me through taking it apart to get all the plates and rubber mat out. I have had this one since they first came out with it and only used it a couple times. I got it back out to do die cuts that my Cuttlebug wouldn't cut all the way. Very happy it still works after I put it back together.

I have a Toyota Prius 2012 when I go through the bumps I hate the bumps when I have 3 people at the but it's ok with two people it doesn't hit the bump I have changed my rear socks still the same do I have to change my Springs

جيد

This is a great video. I changed my coil springs on both sides thanks to this! Only thing is the socket head needed is a 17mm and NOT an 18mm. I ended up rounding off the bolt to the shock absorber because of this which caused a lot of heartache. Other then that excellent video

Proper cowboys wheel under car for saftey but axle stands are in the wrong place lol

Please help. I can't remove the very small motor screws', what could I do?

I have been given a brand new Cut n boss as an early Christmas present as I am about to have major surgery which means I cannot use my manual machine for months. I know they are not available to purchase anymore and Crafters Companion will not help with the problem I have found: the top roller is not rolling at all. I have tried it with power switched off and it is solid, the bottom roller rolls smoothly. If I dismantle it as you have done how do I unjam the top roller?. Any help would be greatly appreciated as I need to craft to recuperate!!.

Really helped ...got shim stuck, so didn't have to remove motor. Thank you you saved me buying a new machine!!

please give tips to remove tight bottom absorber nut..., help

Wow! This is amazing. I spent a few months in Ayr back in Feb - Apr 2008 and parts of it still looked the same as 1969. I'm American (with Scottish Ancestors) and it was like another world there. I absolutely loved seeing the sites and being exposed to the history and culture. It was fantastic! Thanks for sharing this.

That's so dangerous!! Do copper grease those threads on the wheels and surface of drum and WD40 entire engine and bay (Paintwork and wires) it's ease the rust .My 2002 has no rust at all in engine but of course the springs are just like this,sure mine need doing next year.

Thank main need change so going to do that in the morning and my mot failed on that

G Jones I am so pleased for you , hopefully things will be much better now , glad I could have been some help for you .

G Jones, sorry you are not having much luck, can I suggest you watch the video again and do things in the reverse order of taking it apart, your cogs should be on the left hand side of the case and not the right , as I said when its in line the front case will slide straight on, cannot recommend a shop. Let me know if you succeed.

are the back and front the same ??? springs ??

Thank you so much for taking the time to do this. Yes, there are a ton of screws but was very easy once I had everything apart. My plates were all the way thru and jammed at the end but removing the motor allowed me to hand turn the right hand wheels. If you do it to the one on the left, it will not turn. If you work with the two on the right, It will hand crank. Thank you again!

Hi thank you, my Wife had jammed the E Bosser solid tried always even using a mallet and a block of wood over several days with no joy, after searching for some answers and found your video I thought well I will give it try and hey presto problem solved. (WITHOUT PROBLEMS)

I've been there in 2009. Nice little village. What's the exact pronunciation?

easier if you compress the spring with compressors while it's on the ground. I find that the old ones then fall out

So happy!! With your guide I've replaced both rear springs on my Seat Alhambra. I also replaced the bottom rubbers because they were totally worn out. Most of the people surrounding me were laughing at me because the thought a women couldn't get this job done, but I did it!! Saved me a lot of money. So thank you very much!!