Where do I find the parts to set up my condor like your stock n tank position

Soy de argentina tengo un af condor calibre 22. Que tipo de municion y en que numero de rueda lo utiliza

Try making a few different thickness 'Bumper' spacers for the Tophat. Use Delrin. You'll get more control that way. BTW, what is the volume of your plenum?

Hi .. would be great if you could show how to assemble the fx liner to be used in the condors..👍

Did I spot a vintage CenterFlag paintball gauge?!? Also, what dovetail to pic conversion rail are you using?

How can this possibly set off tannerite? I thought you needed a 30-06

i have a fx heavy liner in my custom frame condor as well in .22 ! but i managed to press a steel liner for it with 14mm barrel bushing to hold it to the frame. the last 330mm i have a 16mm OD, 14mm ID carbon cover using the original 16mm end cap. mines not regulated but hooked to a 500cc tank and pcptunes extreme flow valves and 109gr hammer, fluted delrin breech. i exclusively shoot 55gr cast spitzers which are 16.8mm long and it drives them at 1050 fps down to 930 fps from 2850 psi down to 1700 psi. I get 25 - 30 shots with power wheel set to 0.

Độ chính xác không cao

Very cool design. I'm planning on making a .30 Texan but like the fx panthera design, with the plenum in the same position as yours, but with a 300cc cylinder below to refill the plenum

Deve pesar uma tonelada 😢

This is what I want to do with my mine. Is there a way to message you to get more details on your setup?

Very nice.

Wind shouldn't affect the plug imo it because the the tension kit pushes you barrel to the right when you crank down on the barrel clamp that has a big gap in it on the right side I could be wrong with your set up but on my set up it does push it to right because of the gap that clamp has thanks for sharing bsafe buddy 👍

Interesting, never seen anyone do this before. 👍🏻

You need to do a video on the forward bottle setup

Very cool set up bro well done

kzbin.info/www/bejne/r4TXgXedq5h-Y8k

But will it shoot

I liked your design of the cylinder at the front, for me too, the valve has stuck open. Another subscriber and congratulations on the channel!

BORING BORING NOTHING S O S

Crappy groups at 100. 😔

Que cara ruim de tiro não acerta o meio do alvo de jeito nenhum.

how many cc for plenum tube do you have

I think at a certainpoint I think you will hit diminished returns on reg pressure. At the end of the day the barrel volume is fixed. Let's say a given velocity = X pressure at the mussel we could say that the velocity resulted from a barrel pressure of X (hypothetical number 800psi). It will always take the same amount of air to fill the barrel volume to a given pressure. What will change is the function over time or shot cycle. At some point efficiency will go down, I think there will be a happy place in the middle somewhere. I think lowwer pressure feals smother personally.

I have also found barrel tensioning makes a difference in harmonics. I played around with it on my jsar raptor and I also bought the fx barrel tuner and that thing is gold! I have it on my condor currently and am very impressed with the results. I can't speak for the impact mk3 but I make the Griffin slugs so I test a lot of slugs In different rifles. The mk2 handles the power well but it definitely feals different then pellets.

Awesome build. What size plenum did you make? And what valve are you using? I did something kinda similar as far as a full power regulated setup. I think my plenum came out to 122cc and it's a beast. Always looking for parts or ideas.

For testing anything, you will need better shooting contitions and a steadier shooting platform.

Nice shooting. Loved the Tannerite.

What state are you in?

This is not the fx one so it’s kinda misleading

Jangan terlalu besar om

e di libera vendita o ce bisogno di un portadarmi

Super

Was that person trying to say anything of any importance over Spielberg's intro music, Darling, just give us the Facts & the Evidence, your choice of music is rather irrelevant

So much money spent and waisted time on this stuff. The FX impact is officially an older design but when it came out was just about top notch with few flaws. Today FX has stepped up because they know all these things. They introduced the Maverick line to cut out all the extra seals and gadgets for tuning making it super simple for everyone. Sometimes taking things a little slower is better. Always proven someway. The wildcat mk3 is about the simplest way to go. My theory which I've been searching and shooting air rifles over 45 yrs is you have the smallest caliber and the biggest calibers to choose. Therefore instead of fooling with making your air rifles shoot way heavy projectiles and spending on moding and time, just reach up to the next bigger caliber is the easiest way! I've been hunting and doing pesting on 13 big farms for a lifetime living the air gunnars dream. Its always worked perfectly to choose the correct caliber for the need. If your having problems or spending too much time trying to perfect, try this. I know it works. You can always put aftermarket baffles in the air rifles helps a lot. And turn down the power a notch.Air rifles nowadays are more than enough power in itself and most could even say a Weapon!Ed da pro snippin backyard man💥💪😎

That's definitely most stupid idea in whole airgun world. I've glued slug liner inside stiff carbon pipe using liquid metal epoxy resin from Chester Molecular. That's all. Slugs are flying one by one into one hole.

FX M3 ,,its the best ,,🙏👍🇮🇩

Nici like pren

You earned my subscription.. great job

Not seeing your accuracy results after you replaced the original with the new tensioner kit.

Great video and great work on your condor. I replaced the bolt o rings on mine with a 2x7.5mm and 2.5x7mm o rings respectively. It went from losing an average of 20fps between shots to only 2-5fps between each consecutive shot. I've also rebarelled mine with a 580mm kral barrel, and easily get 73 ft-lbs. These are great guns. Looking forward to more content.

Isn't it amazing how much the wind affects it! I suppose the pellets are super light, it makes sense, even at that short distance

You would know all about that guitar tuning!

are you using an aftermarket regulator? If so, which one are you using?

Best 👍👍

Good video. I just got an M3 Sniper .25 and I could not agree more with your assessment. The gun is smooth, accurate, very well designed and infinitely adjustable. Loving it...

I preordered one and am still waiting 🤔

Nice video , keep it going on !

I have an Air Force condor in both 22 and 25 Cal. I've noticed you have a carbon fiber bottle on the four stock of the frame of your condor just wondering how you have that setup for your condor my condor has a spin lock model on it and was just wondering how you managed to do this modification and it appears that you are using the carbon fiber bottle with a regulator to feed the spinlock air Bible tank those are just my thoughts and I can tell you if you want more accuracy try using a mad dog stock The Air Force air gun platform is extremely cold sensitive

Ernest Rowe posted a video a while back where he used a carbon fiber tube "shim" between the rear of the shroud and the front of the receiver on a Mk II as a barrel tensioner. I gave that a try and was disappointed in the results. One question, does your barrel have a carbon fiber sleeve? Is it loose or epoxied in place?