ModBotArmy

Пікірлер

@user-lx9jm1wo3h 8 күн бұрын

Copy/Paste design.

@d34dm0uth3 8 күн бұрын

I was interested until I found out the enclosure version more than DOUBLES the cost of the Regular 5M...Honestly, I'd rather have my Infimech TX, which is already enclosed, has filament detection, auto levelling, and comes in at a $309.

@tbip2001 9 күн бұрын

Love my 5m. Any firm news about a larger version. Im itching to buy a larger corexy and flashforge hinted q4 for a larger model. Any inside info?

@BeefIngot 9 күн бұрын

If he had any, he wouldnt be able to tell you.

@Tripmonkey 13 күн бұрын

In the middle of doing this myself and coming across all the same problems. Also, just found out that support told me to buy a V3 replacement, when my kickstarter printer is V2. God knows how they got that wrong, since remote connection to the printer and the details on my account should tell them everything that they need to know :( Cheers for the vid. Nice to know i'm not alone in this lol

@alboroble 15 күн бұрын

Already subscribed, great video, looking forward to more.

@juicyballerina12 16 күн бұрын

Very awesome , T1 is a very good 3d printer, I have been using it continuously for nearly 2 months ,It's my favorite printing tool .

@eprohoda 16 күн бұрын

good da. very awesome ,=)

@HatunTaniya-r4i 17 күн бұрын

Perez Donna Thompson Helen Johnson Jeffrey

@ArthurKim-i4x 19 күн бұрын

Rodriguez Karen Clark Joseph Moore Jeffrey

@araiza444 20 күн бұрын

Hi! Nice work on your design and implementation. I'm curious why you selected hatch box abs vs BambuLab abs? Also, what infill% and wall count did you end up using? Thanks!

@mariowaemmy8515 21 күн бұрын

Where can I find your filament holder?

@ModBotArmyy 21 күн бұрын

Oof, I really wish I knew where I found it. I want to say it was on printables but its been a loooong time since I downloaded it.

@TheOneAndOnlySatan 23 күн бұрын

Why are prusa printers sooo extremely slow? Looks like 2016 man, dammm

@ModBotArmyy 21 күн бұрын

They really aren't. With the fast profile using input shaping they can boogie. Are they speed demons? No but they can carry their weight.

@TheOneAndOnlySatan 20 күн бұрын

They can't even be considered fast printers. There's a lot between slow and speedboat fast that you Prusa fans don't seem to get. Prusa is just old tech-just look at it. Every video of people using it shows they're slow for general use. And if you check the forums or Reddit, you'll see the Prusa subs are full of layer adhesion problems, warping, layer shifts, and clogs. For $1100, Prusa didn't even care to add a camera, as if Prusa users are partly blind-otherwise, they would've already seen Prusa for what it really is: tech from 2016.

@TheOneAndOnlySatan 20 күн бұрын

@@ModBotArmyy just be honest man, prusa wont exist for much more years. They just cant keep up with development and market.

@Bazeuno 28 күн бұрын

Need to upscale Prusa parts by .5% when printing in ABS/ASA.

@ModBotArmyy 27 күн бұрын

I actually reprinted with no scaling and it’s worked fine (minus one self tapping screw)

@yurik985 29 күн бұрын

Thank you for the donated membership @PF Dennis

@nitroburner77 Ай бұрын

I know it's been a year, but I'm building my 2.4 R2 Rev A LDO kit (matterhackers sale last year). Just wanted to point out the little rPi board has a plug on it for UART if you wanted to lose the USB cable between the Octopus and the rPi.

@Mitsuolevel Ай бұрын

I was a experimental toolhead this week

@s34nsta Ай бұрын

After the recent firmware update, my S1 works fine , and they told me that there will be updates soon, I hope my S1 will get better and better .

@Enjeenier Ай бұрын

This was the last modbot stream before my moving to asia❤

@ModBotArmyy Ай бұрын

Holy cow! I hope the move goes well and wish you luck on your new adventure 🙏.

@lpka Ай бұрын

Have the same issue -10 C to 130C on my bed at 1000 hour. And afte 3 months going back and fort with bambu lab, they are sending me new bed and new power board.

@achillesmjb Ай бұрын

Not designed to be worked on? How would you compare print quality to the Prusa MK4 at best quality settings rather than speed?

@ModBotArmyy Ай бұрын

I would say very comparable. The X1C can print beautiful parts at pretty fast speeds. If you wanted to get even higher quality you could just slow it down a bit to allow for better cooling and less ringing.

@cerrkprgragg Ай бұрын

As long as you can tame it, it's a super beast

@cerrkprgragg Ай бұрын

I print many helmets using S1, super fast.Unbelievable !!

@juicyballerina12 Ай бұрын

My S1 was delivered yesterday, I haven’t had time to open it yet, thanks for sharing

@ModBotArmyy Ай бұрын

I hope you like it! Fingers crossed they can figure out the weird artifacts.

@djbryant77 Ай бұрын

where can I get the STL for that Lighthouse model?

@ModBotArmyy Ай бұрын

It came on the printer presliced. Not sure what the actual model is called.

@djbryant77 Ай бұрын

@@ModBotArmyy That's a bummer. I been looking for a model like that. Thanks for the reply!

@pcvanvliet Ай бұрын

Hi Daniel, am i supposed to get an email from you or from Polymaker, to pick out a filament?

@ModBotArmyy Ай бұрын

From me! Will get you the email as soon as I put Jackson to sleep 😴

@Lavern-zs7lk Ай бұрын

flow reached the legendary 110mm³??

@ModBotArmyy Ай бұрын

lol not quite

@BenChatty 2 ай бұрын

For my journeymaker I had the same issue and had to bevel the washers on those bearing stacks out to create a wider gap for the belt. I am looking to get slightly wider bearings or a small, thin washer to put inside the centre bearing and between the two flange bearings. That should add a bit of play. Biggest consideration is the spacing to the top cover.

@AWSW-de 2 ай бұрын

Thanks for the stream. Keep your head up =)

@ModBotArmyy 2 ай бұрын

I appreciate it 🙏. It’s been a tough one but I feel like we are close. Probably will do some work off stream and update when I have progress to share 😊

@AWSW-de 2 ай бұрын

@@ModBotArmyy Very welcome 🤗 No, please donˋt work offline. We really want to see the little cliffs and hustles too, to get an impression how you solve these issues… To be honest, could not really watch yesterday, because I was in a call most of the time and already wanted to ask if you can disassemble some parts to catch up where I was not really watching anymore… 😂😇😂 But then i saw your hustle with some sections and tried to stay quiet. 🙈😇 Have a good day and sometimes it is this way that it does not work out at all… I worked the last 4 weeks on a complete new robot which nobody has solved to create before and it was a real pain sometimes… I follow then a good advice from an old electronics teacher I had in school and stop working on that topic and come back to it the next day, which usually then works like a charm. I then always asked myself why I made this so complicated the previous day… 🤣 Thanks and have a good time =)

@hoppynaki 2 ай бұрын

Ethernet Cable is solid core. I wouldn't use it to wire a tool head.

@deepnineforty5646 2 ай бұрын

Do you have any content on here for setting up the milo on fusion 360? Also does the milo have an option for a 4th axis or indexer?

@John-to2ki 2 ай бұрын

Is the k1 head the same as this one? Other than the electronics

@nathanandsarahmooney7166 2 ай бұрын

Anyone getting a data chip and strapping pin's error after you flash the files? This is a problem to go any further in the programing and no Wi-Fi either

@FranciscoAngelini 3 ай бұрын

to power is V and G or 5v and Grd ?

@NATHANMOONEY-kp4bc 3 ай бұрын

This should of been plug and play.

@deepnineforty5646 3 ай бұрын

Trying to watch this to help my build. Why the hell are you talking about eating bananas . holy shieeet

@ModBotArmyy 3 ай бұрын

Lol they are high in potassium 🍌

@ememeable 3 ай бұрын

i also did realise that the only prints that did bond however extremely poor finish ie cracks etc were prints from sample filaments or pla that came withe the printer i however loaded my own filaments after they samples and thus could not get anymore prints to bond not to mention stick to the bed. i then realised that petg melted at a higher temp compared to pla i also realised that the geetech 30m willl not heat above 200 this now contradicts the terms of purchase which includes petg and abs etc the whole experience became a nightmare especially doing business with con merchants

@ememeable 3 ай бұрын

hey whats this it seems so familiar it feels like a horror movie my twilight zone is this a joke i am trying to sue geetech for the same issue i purchased the a30m from geetech and did not unbox immediately because of co vid 19 i spent almost $400 and did not even get one decent print from it not even a benchy my first ever printer and no youtube videos as it was so unpopular i contacted geetech and they were extremely rude to me and refused to refund tt went from bad to worse as i kept blaming myself for lack of experience i finally realised it was not fault and also after observing the manual exactly it started ghost printing after a while or just moving around in space geetech advised me to sell it to someone else on ebay. i couldn't believe my ears and gave up entirely i wowed never ever to purchase anything under that name or group of con merchants ever again i am now saving for a bambu

@davide5736 3 ай бұрын

would this kit work on an ender 3 v2 neo?

@ModBotArmyy 3 ай бұрын

I havent used that printer so its hard to say what differences it has as far as the extrusions go. Might be worth asking SIBOOR directly.

@osr75 3 ай бұрын

Great Video, I'mt thinking to buy one KLP1, afetr all of this months, are you happy with the printer? Thanks a lot for this video!

@ModBotArmyy 3 ай бұрын

I ended up donating it when we moved some months back. There is a revised version that I have not tested but sounds like they made some improvements on. Slightly smaller build volume though I believe 220x220. I would at least check that one out and see if the upgrades seem worth it.

@jacobmullins8280 3 ай бұрын

What size tap did you use for this? I can’t find it in the video

@ModBotArmyy 3 ай бұрын

Its an M5 tap.

@jacobmullins8280 3 ай бұрын

@@ModBotArmyy thanks! I think I found it last night rewatching your builds. Waiting on my holder and tap to arrive from Amazon I appreciate you responding!

@lolzdad5040 3 ай бұрын

6/1

@The22v10 4 ай бұрын

I want an UPDATE to The UPDATE... LOL Great Stuff hope the FAMILY is doing well and expanding.

@ogmaker 4 ай бұрын

Hey guys! High-flex cabling is a high-technology these days that incorporates the boundary between the outer coating, the number of copper strands used in the wire, and metalurgy of the wires themselves. Look up IGUS Chainflex to get an idea of where the technogy has moved to...

@haylspa 4 ай бұрын

missed it :( :( always the more weight at the base of the cnc the better some have even made the base Granite or installing lead in the empty places, wanted to make a cnc for years and base Granite, never got around to it even with all the parts :'( but times have changed back on that horse, have way better chance of getting it done today!