I caught 4 mice in 2 days using these snap traps, which were invented in the 19th century I believe. You really can't improve much on a good initial design.
@humanyoda6 күн бұрын
God, damn it! I didn't know there were different setting in this trap. My mice have been walking away with bait!
@icomlw11 күн бұрын
Did not actually show how the valve works....
@janbrewington777112 күн бұрын
I honestly wish you would’ve showed how to use the shredding blade because I’ve got this unit and I haven’t figured it out. I can’t close the top because the blade is up on the top.
@Mike-hb4pc16 күн бұрын
Is this the same too used with Hunter rotors? Thanks
@rogerschieffer291427 күн бұрын
Need new cord on my RK5102K
@alexdavidson7785Ай бұрын
I SMASHED MY FINGER OWWWWWW
@daweilee1986Ай бұрын
Thanks that helped
@MichaelSmith_123Ай бұрын
Really hard to get the Arm bar over the Kill bar, the Arm bar is very Short and it does not stay under the Kill bar - tried several times and couple of close calls :) If anyone has advice on this part, or if there is a Video that shows how to SLOWLY show this Critical part would much appreciate !
@bonnierae7159Ай бұрын
I can't get mine open, either. This video is a waste of time and it's looking like Fiskar's pruners are a waste of money.
@weauxmack2 ай бұрын
Man this thing is INCREDIBLY sensitive. I only managed to place 1 on the ground without it triggering. The moment it touches the ground, it triggers. I literally cannot be gentle enough
@brothaonanadventure3573Ай бұрын
For mine I had success setting it on the floor and using my big toe to hold the kill bar. I used my thumb to lift the cheese until it held, removed my hand, then VERY slowly removed pressure with my big toe. Only issue I've had was I can't move them from where I set them cause they're so sensitive
@hals1fineday2 ай бұрын
Wow lol all you guys are bitchers 😂
@bignight86022 ай бұрын
Yup had fun with this great toy this brings back so many great memories ❤😊
@por22ito2 ай бұрын
Mango Caterpillar
@LRogersPhoto2 ай бұрын
These never worked because you needed a curved piece of ice to sit against the round metal shaver
@marcyellowhair92873 ай бұрын
I caught one just now with this haha, them sticky traps kinda suck lol
@darrionrobson80043 ай бұрын
Its a sign of the times i had to watch a KZbin video as i couldn't get the traps to set from the instructions on the back. Im 61 and am so thankful for KZbin! 😊😊
@VVVVVVVVVVVVVVVVVVCC3 ай бұрын
One pointer is use gloves to ensure your scent isn't on it*
@X68004 ай бұрын
Firm/sensitive side? Well, that's new.
@stephenjwarnecki24384 ай бұрын
Hasbro til all are 1
@sethcreech10144 ай бұрын
Jesus saves
@hopenavajo13914 ай бұрын
Victor mouse traps is good for big mouse,but not for small ones.
@pedro.zurita4 ай бұрын
These traps are a serious nuisance to set but now the older version is very difficult to find. Have to come to KZbin to learn the hacks to proper setup.
@thebusey5434 ай бұрын
These are actual junk. Why are you trying to reinvent the wheel? Original design worked fine.
@tbx595 ай бұрын
Saw a lady carrying around one at Knott's Berry Farm the other day - can't believe this thing is still around
@Dahmer_Jeff4 ай бұрын
Just randomly carrying it around. Odd
@RollingLogs215 ай бұрын
Look at all those corded tools!
@leahcolpitts2155 ай бұрын
Complete garbage
@Willkniceley6545 ай бұрын
As of 2023 I saw it at Walmart
@zxnstu95656 ай бұрын
👏👏👏👏👏
@nateh26656 ай бұрын
Why re invent the mouse. Trap. These are terrible compared to the old metal style.
@CCSFgovrel6 ай бұрын
The “firm” and “sensitive” settings are a joke. It’s more like “sensitive” and “heart attack” as they usually go off in my hands if they don’t go off as soon as I set the down with surgeon-like precision.
@user-pp3vc8id9y7 ай бұрын
I'll never buy your shit again. Steal from me you MF.
@pegjones76827 ай бұрын
I notice they skip the part of releasing the spring part...tha is when the traps often spring and can damage your fingers,is there a trick to this I dont know? Rat traps are even more dangerous to set. Poison is a lot easier BUT i dont use it because it kills raptors...hate even killing mice but.....
@trac-ken7 ай бұрын
So it's not me, very hard to set
@leolennox12098 ай бұрын
With the trap I bought, the "F" position for the arm bar is sensitive and the "S" position is firm. Try it yourself without using that scary kill bar. Hook the arm bar under the "S" & "F" sides in turn, applying pressure to the arm bar with a finger under it. Then gently touch the bait platform to determine which settings are firm and sensitive.
@NancyPatterson18 ай бұрын
Honestly, if they are so much trouble to set that commentors are having to do things that aren't shown in the video - bend the arm bar, rough up the arm bar, do the hokey pokey and say "shazam" three times - I'm moving on. I don't have time to kill figuring out how to finesse something that should be pretty straight forward. Never again Victor.
@MyNameIsUnavailable8 ай бұрын
"ITS The Yum Yum Fun That Is Cool and Keen... And Its Name Is _The Snoopy Sno Cone Machine!*_ #BarsMyHitta
@lionelmessi-eu1ke8 ай бұрын
Thanks, will test out on family members
@MRmofoHD8 ай бұрын
These things suck easy set my a.. took me 20 minutes to set 2 of them because they kelp going off for no reason old ones all the way
@dmonsef9 ай бұрын
My first mistake was I kept the bar to the far left making the trap too tight to spring. 2nd, this mouse seems to be smart and pull the cheese off the yellow plastic. Peanut butter hasn't worked for me, as the mouse doesn't touch it.
@jovicrazed9 ай бұрын
So she touches every part of the trap with her hands and then says to be careful that your scent is not transferred to the trap??
@gfhgrrrbnn80939 ай бұрын
Ahhhh Mams Taylor
@crazyredhare9 ай бұрын
Fried chicken skin. Mice won't even wait until it's safe to come out.
@mutilettie9 ай бұрын
What a stiff.
@zarmindrow583110 ай бұрын
like an enlarged prostate
@lastfreeamericanrob10 ай бұрын
Bought a new one because the old one was leaking at the top. The new one is doing the same thing.
@miguelf770910 ай бұрын
If I set it water every 7 days does it start today or in 7 days?
@texast-bone244710 ай бұрын
My valve makes a lot of noise when I have the spring installed. When I take it out, the noise goes away. Only on this valve. Any ideas?
@marsh652310 ай бұрын
Horribly lacking simplicity
@padawanjesus10 ай бұрын
been trying to set one trap for over 3 hours, its impossible