350Z Gets Custom Suede Interior
8:12
350z Mail In Tune From Z1 Motorsports
11:14
THE BEST Intake for your 350Z / G35
10:27
I Rode in a 600HP Evo X
11:45
2 жыл бұрын
How To Replace 350Z / G35 Thermostat
9:34
How to tint headlights 350Z Edition
11:16
SR20DET Swapped 240Z
15:04
3 жыл бұрын
Пікірлер
@rodolfow.campos6605
@rodolfow.campos6605 2 күн бұрын
Wait what? What you mean a red headliner? Hell no bro! Blk all the way!
@88CReXin
@88CReXin 3 күн бұрын
Rocket Funny
@builtbybeez
@builtbybeez Күн бұрын
🤣
@chelseag191
@chelseag191 4 күн бұрын
I miss that scenery! Looks like this was a cool meet.
@builtbybeez
@builtbybeez 4 күн бұрын
Yeah it was a pretty chill meet
@Mellodamenacce
@Mellodamenacce 4 күн бұрын
Hey brotha, doing this install for my homeboy, im havin issues with the fuel basket compressing all the way when putting the basket back in, any ideas?
@builtbybeez
@builtbybeez 4 күн бұрын
Sounds like something could be binding up. I would check the filter on the pump to make sure that it’s not hitting anything. Also, maybe the bottom of the basket is on reversed. Not sure if it’s direction or not but that could be a thing as well. Hope this helps
@ChrisDoesCars
@ChrisDoesCars 4 күн бұрын
Seems like some pretty cool cars showed up. Nothing beats the Supra tho 😎
@builtbybeez
@builtbybeez 4 күн бұрын
lol yeah that Supra was pretty nice not gonna lie
@samuraiz198
@samuraiz198 4 күн бұрын
So that gauge you wiped clean is the only thing we need to do, to fix a misreading fuel gauge?
@builtbybeez
@builtbybeez 4 күн бұрын
Yes and there is also one behind the driver seat as well. They both will have the same type of sensor that you can clean and it should help out with the misreading fuel gauge.
@ChrisDoesCars
@ChrisDoesCars 9 күн бұрын
I ran that pump for a while and it gave me zero issues. Good choice brother
@builtbybeez
@builtbybeez 9 күн бұрын
That’s good to hear. Hopefully I’ll have the same luck
@krishnahino466
@krishnahino466 9 күн бұрын
Are those aem 340 also compatible for qr25de?
@builtbybeez
@builtbybeez 9 күн бұрын
These pumps are universal so I would say that it should work for the QR25DE.
@krishnahino466
@krishnahino466 9 күн бұрын
@builtbybeez thank you
@rollingkeii
@rollingkeii 11 күн бұрын
🔥fire bro
@builtbybeez
@builtbybeez 11 күн бұрын
Appreciate that bro glad you liked it 💯
@angelsanchez9477
@angelsanchez9477 12 күн бұрын
fire homie. liking the content so far. i recently purchased a 07z solar orange im lovin it . i been experiencing an axle ticking noise when turning at low speed and was wondering in the 3 years of your ownership, have you delt with this issue at all? and if so is there a way to fix it without replacing the axle?
@builtbybeez
@builtbybeez 12 күн бұрын
Thanks I really appreciate that! So I would say with your axle you could check axle boots. They could be low on grease. It would probably just be better to replace the axles when you get the chance.
@butterflyoasis87
@butterflyoasis87 15 күн бұрын
Nice video honey. Lovin the Z🧡 mirrors look real nice on it
@builtbybeez
@builtbybeez 15 күн бұрын
Thank you love, I really appreciate that!
@ChrisDoesCars
@ChrisDoesCars 15 күн бұрын
Those look much better than the little bubble ones haha, might have to pick some up for the Evo 🔥
@builtbybeez
@builtbybeez 15 күн бұрын
Yeah they really do bro. That would be fire on the Evo 💯
@rollingkeii
@rollingkeii 15 күн бұрын
🫡🫡🫡
@builtbybeez
@builtbybeez 15 күн бұрын
Thanks for the support bro 🫡
@brendahernandez9379
@brendahernandez9379 21 күн бұрын
Thank you very helpful
@builtbybeez
@builtbybeez 21 күн бұрын
You’re welcome glad that I could help
@Andino.
@Andino. 22 күн бұрын
Just bought a 2003 track edition and the bumper was ass on the 2.5 hour drive home... literally hanging by a prayer. I need a new one asap and repaint it pearl white. The car has a half ass paint job so matching that half ass paint job I assume it'll be difficult. Also, can you please watch the short I just posted? Is asking about some play my clutch have, It'll be great having another Z owner tell me if its normal stuff or if something is wrong.
@builtbybeez
@builtbybeez 22 күн бұрын
Congrats on getting your Z. I’ve like my experience with KBD if you want to check them out for a replacement bumper. Good luck with the paint. I’ll also check out your shirt and give some input.
@ChrisDoesCars
@ChrisDoesCars 25 күн бұрын
The bumper looks so good bro! The time lapse of the bumper forming was cool to see haha
@builtbybeez
@builtbybeez 25 күн бұрын
Thanks bro just can’t wait to get it painted. lol thought I’d try something different with the time lapse
@autoperformance503
@autoperformance503 29 күн бұрын
Did your engine light cleared up ??
@builtbybeez
@builtbybeez 27 күн бұрын
Yup the engine light cleared I have not had that code since.
@NANA-ne8ci
@NANA-ne8ci Ай бұрын
I know this videos pretty old but I’m recently considering the throttle body upgrade. But my question is, how did you take off those little coolant ports on the throttle body? You show them being removed but you didn’t explain how you did it in the video 😭 3:47
@builtbybeez
@builtbybeez Ай бұрын
To remove the coolant ports you could go about it a couple different ways, you could try to pull them out but sometimes this is pretty difficult. The next option which I did recently was to use a grinder and carefully cut the ports off flush. I hope this helps out
@HeHateE
@HeHateE Ай бұрын
Wait does the tune make the car spit flames or is that something else you had done to it!!?
@builtbybeez
@builtbybeez 27 күн бұрын
Yes the tune does have a flame map so it allows the flames. Also, I’m running test pipes. Factory cats won’t work too well with this lol
@cameronmyles9835
@cameronmyles9835 Ай бұрын
all the amazon harnesses say that they’re not pinned right but from what i see your from ebay works well.
@builtbybeez
@builtbybeez Ай бұрын
I will say that my original harness which I believe I bought from amazon was the incorrect harness. The one I got from eBay did work perfectly.
@smokeylowks2108
@smokeylowks2108 Ай бұрын
What size bolt did you need
@builtbybeez
@builtbybeez 5 күн бұрын
I don’t remember the exact size but I took the factory bolt that was in the original shock and matched it with hardware from Ace hardware.
@kevm9724
@kevm9724 Ай бұрын
Good vid,,,, I kinda already knew what was up, was really good actually seeing it..... 👍
@builtbybeez
@builtbybeez 5 күн бұрын
Thanks I appreciate that 💯
@wokcentral1
@wokcentral1 Ай бұрын
Is this a rev up or non rev up?
@builtbybeez
@builtbybeez Ай бұрын
It’s a non rev-up
@brandonburnett9288
@brandonburnett9288 2 ай бұрын
How tf do you keep the gasket on
@builtbybeez
@builtbybeez 25 күн бұрын
That was a little difficult but you could hold the house and put a bolt through. After the bolt is through then put the gasket on. The bolt would hold it in place while you bolt the house onto the block.
@elkman7529
@elkman7529 2 ай бұрын
Here's a great story. I did the procedure as presented. When i pressed the button on my new key fobs, the blinkers flashed to show they were programmed. But, neither one worked. As a bonus, my original working key fob no longer works. So, I got that going for me.
@builtbybeez
@builtbybeez 5 күн бұрын
Oh wow I’m sorry to hear that it worked that way for you. Have you been able to try again to see if it will fix it?
@elkman7529
@elkman7529 5 күн бұрын
@builtbybeez yes. I figured out my car has a quirk to it. After I disconnected the battery and reconnected, both of the fobs started working.
@elkman7529
@elkman7529 5 күн бұрын
It took a lot of trial and error and about a month of experimenting.
@builtbybeez
@builtbybeez 4 күн бұрын
@@elkman7529 oh wow! That would have been the last thing I would have thought about. Well I’m glad to hear that it is working for you now
@elkman7529
@elkman7529 4 күн бұрын
@@builtbybeez thank you, and thanks for the video!
@1MADZ
@1MADZ 2 ай бұрын
So I've been running these lights original for 4 years. Haven't had a problem with them lasting. But I don't run em daytime *switch on* as to make sure they last though. Car looks sharp.
@builtbybeez
@builtbybeez 2 ай бұрын
Glad to hear that they still work for you. I’ve have them on for awhile actually and haven’t had any problems either. Thanks for the support 💯
@RevlineMedia
@RevlineMedia 2 ай бұрын
Those are actually sick
@builtbybeez
@builtbybeez 2 ай бұрын
Thanks bro I appreciate that 💯
@ChrisDoesCars
@ChrisDoesCars 2 ай бұрын
Not bad broski, keep the videos comin
@builtbybeez
@builtbybeez 2 ай бұрын
Thanks bro, I got some in the archive coming soon
@IronMike-f8i
@IronMike-f8i 3 ай бұрын
Castrol. Edge 5. W. 40.🎉🎉🎉🎉❤❤
@builtbybeez
@builtbybeez 5 күн бұрын
Haha right. Pretty good oil
@senbin
@senbin 3 ай бұрын
Where did you get your sr20 mount kit?
@eddiecardenas1445
@eddiecardenas1445 4 ай бұрын
horrible video
@J3SS3WH1T3L3Y
@J3SS3WH1T3L3Y 5 ай бұрын
what brand is that rear diffuser?
@builtbybeez
@builtbybeez 5 ай бұрын
It’s a no name one from eBay. Got it for about $50
@ChrisDoesCars
@ChrisDoesCars 5 ай бұрын
Looks like the interior turned out nice broski. I'd definitely say do the headliner in black tho 👌
@builtbybeez
@builtbybeez 5 ай бұрын
Thanks bro. It was definitely a pita to do but glad it’s done. Might have to do it in black!
@andyhernxndez
@andyhernxndez 5 ай бұрын
Do yk how to disconnect it from the car ? connected one to my other z now it unlocks both .-.
@builtbybeez
@builtbybeez 5 ай бұрын
I’m not sure exactly how you would disconnect it from the car. Only thing I could really think of is to use a different key fob and program that one to the car.
@jayisa7700
@jayisa7700 6 ай бұрын
Worked like a charm. Thank you.
@builtbybeez
@builtbybeez 6 ай бұрын
Awesome I’m glad it worked for you!
@minenotyours6895
@minenotyours6895 6 ай бұрын
Black BRIDE headliner
@minenotyours6895
@minenotyours6895 6 ай бұрын
Bro, you hat is a HUGE effin job. You buggin. 😂
@builtbybeez
@builtbybeez 6 ай бұрын
My hat? I’m not sure what you’re talking about
@YNGFLICX
@YNGFLICX 6 ай бұрын
I drive the same car same color I was planning on making a car channel as well mine is a 2004 350z enthusiast model with a 6 speed manual ofc🏎️
@builtbybeez
@builtbybeez 6 ай бұрын
Nice!!! I’d say go for it, I’ll definitely give you some views when you do.
@mikunakano8628
@mikunakano8628 6 ай бұрын
Im debating between the z1 ecutek or and uprev tune from and tuner. But im leading towards the uprev. Dont get me wrong. z1 did a beautiful job on this. Also your car looks beautiful bro
@builtbybeez
@builtbybeez 6 ай бұрын
Thanks I really appreciate the support 💯. So to me I would say it honestly depends on what your goals are. If you are staying NA then I would say UpRev will be fine. If you plan on boosting then I would lean more towards EcuTek. I heard that has way more options when it comes to boosted applications. If EcuTek would’ve been around when I originally purchased my tune I would’ve gone with it. Both platforms are good.
@mikunakano8628
@mikunakano8628 6 ай бұрын
@beezyrider yea. I was planning to stay at N/A. I do want to boost it, but it's a drift/daily. Again, thank you for doing this review, doh. Stay safe, sir, and God bless you.
@builtbybeez
@builtbybeez 6 ай бұрын
I feel like you would be happy either route. Although I went with Z1 for this option for the mail in tune, when I do my next tune I plan on going with Moncef and Admin Tuning. No disrespect to Z1 at all, but I’ve seen nothing but great work from Moncef. Plus he does remote tuning for boosted applications which is what I’m working towards. I wish you the best with whichever option you choose. Thank you and you be safe as well. God bless 🙏🏼
@jairalim
@jairalim 8 ай бұрын
Hello, what if it doesnt flash?? HELP
@builtbybeez
@builtbybeez 5 күн бұрын
Try going a little slower with the procedure to make sure all the steps are done correctly
@hellohellohello-b1j
@hellohellohello-b1j 8 ай бұрын
Airbaglight?!
@builtbybeez
@builtbybeez 4 күн бұрын
Yes this should help out if your airbag light is on. You would then need to perform a reset procedure.
@Lifeofshawnyg
@Lifeofshawnyg 9 ай бұрын
Does anyone know of a bigger throttle body than this
@builtbybeez
@builtbybeez 4 күн бұрын
I think that these are the biggest throttle bodies available for the VQ
@scoobysmackztv3821
@scoobysmackztv3821 9 ай бұрын
Does it pop at all ?
@builtbybeez
@builtbybeez 9 ай бұрын
After getting test pipes and a tune, yes it will pop now.
@Lovetovote
@Lovetovote 9 ай бұрын
Bro too funny w/ the sound effects 😭😭
@builtbybeez
@builtbybeez 9 ай бұрын
lol thanks
@pradovq
@pradovq 9 ай бұрын
When I lock my doors from the inside with my driver side lock buttons my diver side lock has never worked I have to manually set it would that make a difference to not let me program when you unlock and unlock procedure to program the key
@builtbybeez
@builtbybeez 9 ай бұрын
Hmmm that’s a good question. It might not let you do the programming since the electric motor isn’t working for the lock. I’m not sure if the bcm would need to see that input for the procedure to start.
@kylenowlen7512
@kylenowlen7512 10 ай бұрын
What are all the maps you got out of this
@builtbybeez
@builtbybeez 9 ай бұрын
I received performance, burble, valet and security
@TitoGutierrez
@TitoGutierrez 10 ай бұрын
That's not keyless entry
@builtbybeez
@builtbybeez 10 ай бұрын
How is it not?
@ChrisDoesCars
@ChrisDoesCars 10 ай бұрын
Much better than the plastic oem one 🔥
@builtbybeez
@builtbybeez 10 ай бұрын
It really is bro. That plastic one is trash
@leoswheels424
@leoswheels424 10 ай бұрын
Niceeee
@Galaxoid
@Galaxoid 10 ай бұрын
I can feel the pit of the stomach drop right there bro. Glad ya got it fixed!
@builtbybeez
@builtbybeez 10 ай бұрын
Thanks I really appreciate it!