What are useful piece of instruction, but what the hell is the brass band in the background? for goodness sake
@emrahsoylemez842410 ай бұрын
I'm looking for a job . I want to work
@kamalsahidaini57611 ай бұрын
Hi, the way u got your 180 degrees is 100% wrong … u must turn the lens 180 degree vertically but not the body of cam turn 180 degree, make sure your tutorial is follow standard procedure …. Thanks for ur information 👏🏼
@alakamarann Жыл бұрын
👏🏻
@JoeBackes Жыл бұрын
I'm confused. If point A is the spot where a young woman is seen holding the long measuring stick, and point B is the location of the theodolite, and point C is the spot where a young man is holding the long measuring stick then why does the narrator refer to point C as point B? At 5:20 the theodolite is turned to the right. That's point C. Yet, the narrator says point B.
@ggdfggdfgdffgfddg34 Жыл бұрын
Hello friend, I work as a surveyor in Belarus. Tell a friend which sites in the USA I should apply for to find a job as a surveyor, I worked only in geodetic support for construction along this profile, building houses, schools, kindergartens. Will they take me if I have a Belarusian diploma or do I need to retrain in the USA and where to go to retrain in the USA?
@irfantech5421 Жыл бұрын
Good job 👍 brave lady and I m also chief surveyor
@kebman Жыл бұрын
Wouldn't a laser or radar speed up this process tenfold?
@happyjack8952 Жыл бұрын
What would speed it up greatly would be to have someone who knows what they're doing demonstrate the proper procedure
@mathmandrsam2 жыл бұрын
A quick question, if you know the answer... I have a theodolite with a laser plummet. However, the tripod has a plumb bob hook inside the tripod screw. This works well for when I attach a plumb bob. However, this interferes with the laser dot which becomes quite blurry and poorly defined. What do people do in this situation?
@lashart2002 Жыл бұрын
I was a surveyor for over 7 years. I never used the plumb bob to center the theodolite. If you set up the transit often enough you don’t need it. Therefore no blurry view.
@skibee509 ай бұрын
Remove the hook silly
@MrJbxl882 жыл бұрын
I use a dot lazer to get the legs centered. It's a little faster than using a plumb bob. Set the dot on the ground mark and shoot it up thru the center of the legs.
@jorgepires43422 жыл бұрын
Conheço bem teodolito nível estação total. Sou técnico de instrumentos. São Paulo Brasil Obrigado .
@CentralCanada2 жыл бұрын
Rookies ! Or first yr students ? L.S.T. retired
@montiraruba28312 жыл бұрын
Hahaha!!! I remember those days 15 years ago. How clumsy I was and the setup steps I took to set up my instrument. Today I’m a lot more efficient in setting up.
@caylanellesmere56582 жыл бұрын
Easier and quicker method. Level up the tribrach first ensuring equal distance above and below the screw, normally an indentation in the screw. Now using the optical or laser move the theodolite and tripod together iover the station until central. Now go round each leg in turn, move the leg up or down untill the pond bubble is pointing towards the next leg you are going to. Eventually the pond bubble will be central after you make 3-5 adjustments. Now check the optical or laser plummit should be over the station. If it is not then loosen thr theodolite slightly from the tripod and slide it until its over your station and then re-tighten ( since you leveled the tribrach it shouldn't impact on your setup) You may have to adjust the fine level slightly. If your theodolite doesn't have a EDM dump it. It will make a good doorstop. Using strada went out in the 70's. Good luck and may the force be with you.
@zaholando6262 жыл бұрын
I really enjoyed the way you guys Manipulated the thiodolite
@davidchatterton63712 жыл бұрын
I’m surprised that you didn’t use the plate level to ensure that the theodolite is truly level. The bull’s eye level does not give such an accurate level although it might be good enough to level the instrument within the range of its automatic compensator (if fitted).
@davidchatterton63712 жыл бұрын
If an automatic compensator was in use, the word Tilt would appear on the display. Since it isn’t, that is all the more reason to use the plate level to complete the levelling of the instrument.
@angleturner2 жыл бұрын
OMG, there is SOOO MUCH wrong bad information and incorrect procedural explanations in this video it isn't funny. I could write a book of it. Geez, please do NOT try to learn anything from this video. This is crazy !!
@angleturner2 жыл бұрын
This video is meant for a joke, right ??
@dadaomotoyosi65872 жыл бұрын
This instrument is Total station not Theodolite
@ZakirmanhadiChannel2 жыл бұрын
very good knowledge given, good luck always and thank you for sharing
@ezekielsamuel8652 жыл бұрын
Good lesson i have learn a lot thank you
@michaelgrant14472 жыл бұрын
Thorough video, but even engineers should know how to pronounce "height."
@Bendigo12 жыл бұрын
You mean it isn't heidth
@johnwhan72883 жыл бұрын
i use a transit and a tapr omg.ur serious. holy shit just use the good old transit and mark it down nice trick but erm. doight
@johnwhan72883 жыл бұрын
wow good guess on getting it centered over the nail or whatever
@timshaw3903 жыл бұрын
4.80 Feet !! WTF. what scale are they using to measure, imperial or metric????
@Bendigo12 жыл бұрын
Just decimal inches. 1 1/2 ft is 1.5 ft. 3 3/4 ft is 3.75 ft. Pretty simple really.
@gatorwing62313 жыл бұрын
This girl has no idea how to set up a Theodolite quickley & accurately. No plumb bob needed. Absolutely clueless.
@robertbruner74293 жыл бұрын
Educational. The choice to demonstrate to an orchestrated version of "Home On The Range" was a bit strange, but otherwise very informative.
@Jaesahi3 жыл бұрын
what is stateÖ technique?
@henryn54453 жыл бұрын
I saw this total station on Amazon and it's a lot cheaper than others. Why is it cheap?
@dreadfoil3 жыл бұрын
Because it's not a total station. These are theodolites, they aren't a precise, nor as robotic as a total station. A total station will read all the angles and measure them for you (and do the math). They also only require one person to use.
@henryn54453 жыл бұрын
@@dreadfoil hmm that make sense now😢😢😢
@andypeterson21263 жыл бұрын
This is stupid, I could just use my iPhone to measure those distances ! Or a fuqin tape measure. Not that bowlsh1t machine! Overpaid beuracrats !
@fcalin213 жыл бұрын
Really bad crew.
@DramaVibes2533 жыл бұрын
nice surveyor
@susmitroy89963 жыл бұрын
😂😂
@allenglish62473 жыл бұрын
the best theodolie demonstration vidoe on u tube
@subhajitdas43183 жыл бұрын
Wrong method 😄
@TheAskTrixieChannel4 жыл бұрын
Well, I didn't learn how to survey, but I now know how a Plumbus is made. So, thank you.
@jamescampbell77804 жыл бұрын
Let's skip Part 2 just in case!!! And do not Subscribe!
@wanderer732874 жыл бұрын
Firstly, where's part 2? Secondly.......what the hell did I just watch?!?!?!?! 🤣🤣🤣🤣🤣🤣🤣🤣🤣
@tcjohnson34374 жыл бұрын
Wow. This is really bad. This doesn't not reflect well upon who taught Amos and Andyette.
@lamialamia95664 жыл бұрын
Good luck I appreciate
@kamalarawat26644 жыл бұрын
Sup super good support bro
@HutamaSurveyChannel4 жыл бұрын
good and informative video, the measurement is good in the park LOL 😁😁😁
@Sulimankhanacademy4 жыл бұрын
🙃
@tvlog874 жыл бұрын
kzbin.info/www/bejne/qJe0dqR6qLx4pcU
@CaptVimes64 жыл бұрын
its height with a "T" sound at the end not heigth
@dustinsharber954 жыл бұрын
Just what the fuck are these kids doing? This is the saddest thing I've ever seen. Using a rod to measure an HI? Every single thing these people do would get you kicked off of my survey crew if they did it more than once.
@susirusi30654 жыл бұрын
Fake pyramid project
@romliyanti75704 жыл бұрын
Mau nanya dong,,cara perbaiki thelodolit digital terendam air di daerah mana ya,,kalo ga jual butuh aja dah ,,theodolit nya bekas ke rendam air
@civiler-technique34144 жыл бұрын
Hii
@rustyshackelfors32285 жыл бұрын
I know this is an informative video only but having worked in this for years it pains me. 2 to set up an instrument?! and they take too long