REST IN PIECE TO THE WHITE TE37'S!
9:17
Пікірлер
@georgeisaacson5032
@georgeisaacson5032 2 ай бұрын
Im looking at installing M2Competition seats on my M2 LCI but worried about not getting the M badges to light up after being installed. Any tips to guarantee they work properly?? Thanks!
@Joeyz088
@Joeyz088 2 ай бұрын
It sounds so good just idling. I’m looking to modify my exhaust but don’t want the popping. Maybe mid pipes? What type of exhaust should I avoid?
@hoangdaitran6048
@hoangdaitran6048 3 ай бұрын
way too low
@oooooooliver
@oooooooliver 4 ай бұрын
are those OG's or SL's?
@ethanpresto
@ethanpresto 4 ай бұрын
@@oooooooliver sl with og stickers
@oooooooliver
@oooooooliver 4 ай бұрын
@@ethanpresto didn’t think you would reply 😅 thank you! your f80 made me love f80’s and inspires me to save up for one someday, even tho you sold it. it’s the perfect spec’d f80
@ethanpresto
@ethanpresto 4 ай бұрын
@@oooooooliver i try to always unless i somehow don’t get the notification! but i appreciate it means a lot! was definitely a fun car to own you’ll enjoy it 100% will be worth the wait! hopefully can pick up another car soon but i’ll probably build the daily on here!
@fichteherb3492
@fichteherb3492 5 ай бұрын
😍😍😍😍😍
@marcoxtv6854
@marcoxtv6854 5 ай бұрын
What lip bro
@Hellafush
@Hellafush 5 ай бұрын
To get front tilt (around -7 or -8) do u just need front lowers & tension rods?
@ethanpresto
@ethanpresto 5 ай бұрын
@@Hellafush yeah! send me a dm on instagram if you’re looking to get some we carry spl stuff!
@adolfocardoso9362
@adolfocardoso9362 5 ай бұрын
Brrap
@LesliePupo-s3k
@LesliePupo-s3k 5 ай бұрын
what front lip?
@Matthew-jn7ss
@Matthew-jn7ss 6 ай бұрын
I have equal length with stock down pipes, coupled with v2 m performance exhaust, it sounds decent!
@swag7100
@swag7100 7 ай бұрын
you you wanna sell the cage?
@miguelwatteau568
@miguelwatteau568 7 ай бұрын
Hi,where to buy these headlights ?
@ethanpresto
@ethanpresto 7 ай бұрын
these are now mass produced and available everywhere i would say just get them on ebay every company is just drop shipping that same set.
@mosescalderon4259
@mosescalderon4259 7 ай бұрын
How bad is the 2k rasp on this setup?
@gregshoopman6369
@gregshoopman6369 7 ай бұрын
Take the bags off
@stevenwilliams9280
@stevenwilliams9280 8 ай бұрын
Did you notice any power difference/responsiveness?
@ethanpresto
@ethanpresto 8 ай бұрын
to be completely honest not that i know of it did feel a little more responsive but it could’ve also been in my head
@Hellafush
@Hellafush 8 ай бұрын
Would u run 225/35/19 on a 19x9.5 & 235/35/19 on a 19x10 or 235 all around is the best ?
@ethanpresto
@ethanpresto 8 ай бұрын
depends on fitment you want both would be solid!
@Hellafush
@Hellafush 8 ай бұрын
@@ethanpresto what are some good tires for stretch other than lionhearts?
@zeidakiss
@zeidakiss 9 ай бұрын
Are the bangs part of a tune?
@takeoverdept.
@takeoverdept. 9 ай бұрын
You think spacers would be needed for a f32 440i xdrive on vors vr8 ? I’m checking rims that look similar to it n most of the ppl installing these deep dish rims need spacers ? Or is that just cuz you went 10 inch wide tires, I’m going 8.5
@michaelo1296
@michaelo1296 9 ай бұрын
Did you need to take out the fender liners so you could air out/ slammed?
@ethanpresto
@ethanpresto 9 ай бұрын
nope! had them all in still!
@F83.M4
@F83.M4 9 ай бұрын
Trashy low class build and it sounds like shit
@F83.M4
@F83.M4 9 ай бұрын
nice channel spicoid
@AB46s
@AB46s 11 ай бұрын
bro where can i get the wires
@doda74
@doda74 11 ай бұрын
From watching your video, I was able to make my own wiring and easily do this mod. So, thanks! And I hope you got the black seat lights by now.
@err7273
@err7273 11 ай бұрын
offset?
@ethanpresto
@ethanpresto 11 ай бұрын
18x9.5 +22 (275/35) & 10.5 +20 (295/30) 30mm spacer up front
@err7273
@err7273 11 ай бұрын
@@ethanpresto bet i plan on getting some for my 240 & i want a good lip on it so tryna make sure brakes clear🙏🏽
@gixxerhoff7502
@gixxerhoff7502 11 ай бұрын
How was the NVH (noise vibration) with the camber and toe arms?
@dc5flyinhigh
@dc5flyinhigh 11 ай бұрын
Bro what was your set up with the single midpipe before you switched?
@fashoojt
@fashoojt 11 ай бұрын
What were you lowered on?
@ethanpresto
@ethanpresto 11 ай бұрын
airlift bags, but ran this same exact setup on m bcs for a couple weeks before i switched wheels again
@J4YJ4YYY
@J4YJ4YYY Жыл бұрын
fav setup by FARRR, do you remember the wheel + tire specs?
@ethanpresto
@ethanpresto Жыл бұрын
i believe 20x9.5 +23 & 20x11 +40 but i ran big spacers cos of my suspension & camber setup but that’s perfect spec for standard lowered f8x!
@J4YJ4YYY
@J4YJ4YYY Жыл бұрын
@@ethanpresto thank you so much brother🙏
@johnvthvn
@johnvthvn Жыл бұрын
hey man was wondering if you could point me in the direction of how to swap the pins, bought some clears but the lights are flipped
@fronda_6319
@fronda_6319 Жыл бұрын
Yeh same, tryna figure out also
@AaronFilms12
@AaronFilms12 8 ай бұрын
Did you end up figuring it out?
@jonathanneumark8411
@jonathanneumark8411 Жыл бұрын
I have just swapped mine out ( M Sport 650) and definitely easier without removing steering wheel but take care disconnecting the blue connectors. Mine were really tight and needed patience. Also, I struggled with the airbag springs. You made it look so very easy.
@diddy2612
@diddy2612 Жыл бұрын
ssr wheels have 4 disk levels for brake clearance. what disk level are your fronts?
@ethanpresto
@ethanpresto Жыл бұрын
these were mid / medium disk but i ran a 3mm to clear the fronts they were 19x10.5 +0 with the spacer
@diddy2612
@diddy2612 Жыл бұрын
@@ethanpresto thanks. I have a different different car but I’m hoping mine clear my bbk
@jayrazvi1515
@jayrazvi1515 Жыл бұрын
how did you re-install the heated steering module on the new wheel?
@ethanpresto
@ethanpresto Жыл бұрын
i didn’t, the m performance wheels don’t come with heated option
@MMMitchDrive
@MMMitchDrive Жыл бұрын
How does the tone compare to the equal length? I want the deepest , least raspy tone possible with stock Down pipes and stock mufflers. F83 m4 non comp. Loudest deepest single or Equal length?
@ethanpresto
@ethanpresto Жыл бұрын
deeper tone will always be the single midpipe in my opinion
@Verasign
@Verasign Жыл бұрын
It doesnt work for the F87 :( M2
@brayanrodriguez-wh6rq
@brayanrodriguez-wh6rq Жыл бұрын
Wait how come ?
@gorerix
@gorerix Жыл бұрын
Why does it not work? Did you test it?
@kareemprime7631
@kareemprime7631 Жыл бұрын
Bro UK that pic from the back when you was at the gas station I have the pic as my lock screem... Nice car❤
@justintrevino5445
@justintrevino5445 Жыл бұрын
currently trying to find this lip :/
@ballisticwaffle1512
@ballisticwaffle1512 Жыл бұрын
Res midpipe?
@jortepap
@jortepap Жыл бұрын
yes.
@w211ryda
@w211ryda Жыл бұрын
You in SD? Which shop did your wheels?
@diegomurillo175
@diegomurillo175 Жыл бұрын
What wheel setup is that?
@sonnydayz1745
@sonnydayz1745 Жыл бұрын
Perfect ///M🔥
@BPF80MCar-vi1pg
@BPF80MCar-vi1pg Жыл бұрын
Why in gods name would you want that thing on bags. Man im on m performance HAS and have gone through 6 carbon lips
@Johnypaguay
@Johnypaguay Жыл бұрын
link to the lip? 😅
@cokemachine62590
@cokemachine62590 Жыл бұрын
Do you run this flame tune all the time? How are your turbos doing lol
@ethanpresto
@ethanpresto Жыл бұрын
no i rarely do haha and if i do i’m not constantly shooting flames but no issues yet
@Stilo95
@Stilo95 Жыл бұрын
How much louder it is? Any db readings, measurings?
@BPF80MCar-vi1pg
@BPF80MCar-vi1pg Жыл бұрын
Hey do you still have this lip
@TeenFitnesss
@TeenFitnesss Жыл бұрын
🔥
@jeremyalba4716
@jeremyalba4716 Жыл бұрын
Second 🤣
@leeemousine
@leeemousine Жыл бұрын
Gotta run this back with my new found knowledge and skills 🫡
@csboi
@csboi Жыл бұрын
This isn't an OEM BMW CS lip, for anyone watching. I don't want to cause trouble, just want to inform people who may be installing an OEM CS lip. The OEM CS lip is fixed to steel brackets which are bolted to the bumper supports, effectively the lip is bolted directly to the frame of the car at 3 locations, left, right, and center. There are a few additional bracket required. I can provide the part numbers if anyone needs them.
@ethanpresto
@ethanpresto Жыл бұрын
never said it was oem watch the video
@csboi
@csboi Жыл бұрын
@@ethanpresto I posted my comment for people that might miss it. Your video title is misleading, obviously.
@ethanpresto
@ethanpresto Жыл бұрын
@@csboi welcome to youtube!
@csboi
@csboi Жыл бұрын
@@ethanpresto I mean, misleading titles are very common here, yes. Nothing new. Which is why I feel it's important that users openly write clarifying comments so that people don't make mistakes. I try to help wherever I can. 🤙
@jaos4runner
@jaos4runner 10 ай бұрын
Please provide the part numbers. Would like to see them
@igormarques888
@igormarques888 Жыл бұрын
Hey bro! Thanks for the video! I would like to ask you about which one is louder. I know probably the single midpipe is more louder than EL right? But it's a big difference? Because I'm thinking about buying the EL with Vrsf Catless downpipes but I really want noise when i open the valves. Firstly I thought to buy EL non resonated but I saw that is not good and sounds bad. I will use catless downpipes but I really don't know if I will buy single or EL since I really want a good and loud noise. Thanks
@ethanpresto
@ethanpresto Жыл бұрын
they’re both very unique in their own way but i’d definitely say the single midpipe is louder! at times i do miss the single it sounds so much better low end torque but at high rpm’s full throttle i love the sound of the EL! 100% make sure you do go with the resonated though when going catless!
@igormarques888
@igormarques888 Жыл бұрын
@@ethanpresto ok bro thanks for you answer, but about the el midpipe non resonated is that shit so bad? 😂 It supposed to be louder but maybe have too much rasp, that's it?