Why didn't you stop finning after -10m to enjoy the free fall ???
@bobharris62302 ай бұрын
Fwaaar I bet you know how to put ya hands firmly in a crack ❤
@nutz28012 ай бұрын
Hmmm 🤔 don't let go 😂
@merrymanbushcraft2 ай бұрын
This is absolutely awesome mate! Love the music too!
@Richie2Shoes2 ай бұрын
Cheers pal!
@scottralitz424 ай бұрын
I did my one & only Spartan Beast a few years ago wearing a red Speedo. I usually run Tough Mudders in similar shorts. 🩲
@AlexanderGent Жыл бұрын
Nice going mate, well done, I'm looking forward to when I can reach this depth. How long after your Padi freediver did you go for advanced?
@Richie2Shoes9 ай бұрын
Hey, thanks and sorry I missed this, I did the freediver and advanced course in the same week and then went all the way straight through to instructor which took around 3 months. I'm now back in the cold waters of Wales just about to start teaching in sub 10 degree Celsius water, big changes to the Thai temperatures haha!
@AlexanderGent9 ай бұрын
@@Richie2Shoes That's awesome! Im based in West Yorkshire. Where abouts in Wales are you teaching?
@Richie2Shoes8 ай бұрын
@@AlexanderGent I'm based in Bangor North Wales, I used to live over in West Yorkshire, it's great over there
@AlexanderGent8 ай бұрын
@@Richie2Shoes Nice one! Do you teach during the winter or do you have access to a diving pool?
@Richie2Shoes8 ай бұрын
@@AlexanderGent I will be teaching through the winter, starting the first course end of this month, but I'm solely teaching through the University dive club at the moment.
@bigted5002 Жыл бұрын
Cool
@ayeapprove Жыл бұрын
I've replaced the gimbal cable and now I have no more video feed and the gimbal violently tries to calibrate and doesn't work. What can I do? Thanks!
@Richie2Shoes Жыл бұрын
I'm not sure what to do in this case. I initially had a problem with the replacement Gimbal cable being broken and it was not calibrating properly, I ordered another one, fitted it and that worked fine. If the video feed is broken too it could be another issue
@johnallen5160 Жыл бұрын
this is the best video, most video is too fast, also doesn't show enough detail, than you very much.
@Richie2Shoes Жыл бұрын
No problem, I'm glad it helped you 👌
@coltenmcdaniel6952 жыл бұрын
Nice vid
@alexvite50652 жыл бұрын
I replaced my ribbon cable with a new one. I met started well and I was happy it worked. Unfortunately, after flying for 20min, the same gimbal motor overload issue reappeared. And the gimbal gets hot really fast, only after starting the drone for 30sec it’s already very hot. I opened the gimbal again and tried fixing the ribbon cable. But it didn’t help. Any idea what else I could do? Replace the whole gimbal? Buy another ribbon cable from another company? Thanks
@Richie2Shoes2 жыл бұрын
Try cleaning and the hinges in the gimbal with a small brush, if there is dirt or debris present the extra friction might cause the motors to overheat. If that fails I'd try getting a new ribbon cable, I had to do this as the first one didn't work. This is a cheaper option than replacing the gimbal. If it doesn't work you should try searching some forums for people with the same issue before you buy a new gimbal, you might find another solution.
@alexvite50652 жыл бұрын
@@Richie2Shoes Thanks. I was just about to order a new gimbal arm for $70. It has a ribbon cable already. You think I should try another ribbon cable first?
@Richie2Shoes2 жыл бұрын
@@alexvite5065 try cleaning it all first, then give it a fly and see what happens. How much are you paying for the ribbon cables?
@alexvite50652 жыл бұрын
@@Richie2Shoes okay, will do. thanks. $8 for the ribbon cable
@Richie2Shoes2 жыл бұрын
@@alexvite5065 maybe try one more cable, then replace the gimbal if it doesn't work. You can keep the one you buy as a spare because they do regularly become faulty 👍
@jokdigitalvideo2 жыл бұрын
Just the best video on replacement of ribbon.great camera angles and clear description keep up the great work and a new sub
@Richie2Shoes2 жыл бұрын
I'm glad the video helped you, have fun flying!
@99sparky083 жыл бұрын
thanks. glad i found this video. was a 20 minute job instead of 2 hours and wrong routing/folding from other videos and poor examples....
@Richie2Shoes3 жыл бұрын
You're welcome
@chanelkuini58833 жыл бұрын
good
@Chazzny43 жыл бұрын
I've watched numerous cable replacement videos, this one is the closest to being actually useful but I still can't get the folds right.
@stephenward35273 жыл бұрын
Gright video replace a cable as you say and now the camera don't even move on startup any other time any ideas
@Richie2Shoes3 жыл бұрын
I'm not sure sorry, I had to replace the ribbon cable twice because there was a split in the first one that I hadn't noticed. You could check all the connections are firmly in place. It might be worth having a look if someone else has done a specific video on this. Good luck fixing it 👍
@ChipmunkDale3 жыл бұрын
I love your camera work shooting this video and your thorough instructional skills (from Los Angeles, CA)
@Richie2Shoes3 жыл бұрын
I was using an old GoPro so I couldn't keep the focus perfect all the time because I couldn't see the footage live, but I'm glad it helped you out pal
@ChipmunkDale3 жыл бұрын
@@Richie2Shoes Even though it was an old GoPro, it was better than most other DJI how-to’s out there. Keep up the good work!
@Richie2Shoes3 жыл бұрын
@@ChipmunkDale cheers man 🤟
@earljurgeluks33873 жыл бұрын
Thank you, I have looked at tons of videos and yours is the only one that shows how the cable goes in completely. Most of them start, then show it finished. Look forward to the rest of your videos.
@Richie2Shoes3 жыл бұрын
Glad it helped!
@LaertSkreli3 жыл бұрын
This was the best video I have seen on this topic. Thank you so much - I had been trying to replace my ribbon cable a few times unsuccessfully - this video was the difference. MP1 is back to flying.
@Richie2Shoes3 жыл бұрын
Great news pal, glad it helped
@bjase314 жыл бұрын
Best video explaining how this thing goes on there. I messed up the first cable I attempted to install but now I’m much more confident that I can install it. Thanks
@summerchyld55544 жыл бұрын
Thank you! Best tutorial out there!!
@YeshuaDisciple9164 жыл бұрын
What tools do you need to disassemble? Besides the hex screws, what kind of plastic clip removers, or whatever you call it, does one need? *PLEASE* get back to me ASAP* !! Thank you. I need to do a repair, however, I'm not sure exactly what it is I need. *PLEASE HELP* !!!!!
@danamckittrick21624 жыл бұрын
The BEST instruction on threading that Ribbon Cable correctly. THANK YOU!
@ashleybeal9275 жыл бұрын
Can you fix mine please.??.?
@harolddasynth7955 жыл бұрын
There's a lot of videos about this repair but honestly,yours is the most detailed one,thank you so much for sharing.
@Richie2Shoes5 жыл бұрын
You're welcome!
@williamhbynumiii52695 жыл бұрын
This helped me so much! I finally got mine fixed!
@Richie2Shoes5 жыл бұрын
Great news!
@JuanRamirez-kt1se5 жыл бұрын
I'm on my second Flex ribbon after following someone else's instructional video. This time I will have your running on my laptop to make sure it all goes well. Thanks for your efforts for detail in your work. Lesson learned: the first video may not be the best. Thanks again.
@Richie2Shoes5 жыл бұрын
No problem, happy to help!
@SpryBrent5 жыл бұрын
Best video so far...unfortunately when I turn the drone on the camera points down. I guess I'm going to have to send it for repair after all
@Richie2Shoes5 жыл бұрын
That happened to me with the first ribbon cable I changed, it turned out that was damaged upon delivery. It could potentially be that the ribbon cable was damaged when you received it, before sending it off it may be worth trying to give it one last shot and fit another cable 👍
@goaliebrent5 жыл бұрын
@@Richie2Shoes thanks. But I've tried this three times now. The first two times I may have damaged it trying to install. I felt the last time based on this video I did a pretty good job. Still hoping that's all it is and the official repair company will just put a better quality cable.
@Richie2Shoes5 жыл бұрын
@@goaliebrent that's a shame that it didn't work, hopefully you can get it sorted and get flying again ASAP
@Stu2be25 жыл бұрын
My gimble keeps resetting mid flight is that down to the ribbon cable looks like it was crashing 💩me right up
@Richie2Shoes5 жыл бұрын
Haha, I never had that problem so I'm not sure if changing the ribbon cable would help. It's worth a try of you haven't got any other options I reckon
@joshuapr925 жыл бұрын
Thanks 🙏 u r the only one ☝️ that did a correct video how to do this
@Richie2Shoes5 жыл бұрын
No problem, glad it helped!
@lizbarber34735 жыл бұрын
Thanks for your video , my mavic is working again , what you detailed is deft the most difficult part of the procedure , thank you thank you thank you 👍🏻👍🏻😁
@Richie2Shoes5 жыл бұрын
You're more than welcome, glad it helped!
@327JCG5 жыл бұрын
👏🏾👏🏾👏🏾🙌🏾🙏🏾
@Koelkop5 жыл бұрын
The funniest thing about this cable is that you do not even have to crash to damage it. Mine just gave up after 270 hours of flight from wear and tear..
@Richie2Shoes5 жыл бұрын
Yea, I think it's due to poor gimbal design, there's a piece of plastic on the gimbal frame that rubs against the ribbon cable when you move the camera. I filed it off and haven't had any problems since 👍
@harolddasynth7955 жыл бұрын
i agree,mine has never had a crash or even a minor bump and is always wells ecured while in the bag,3 weeks i have'nt used it and one day i decided to fly it,voila!gimbal overload!
@Bill-NM5 жыл бұрын
Thanks very much for this video...priceless...but...I wish you would have shown more of the reassembly.
@Richie2Shoes5 жыл бұрын
You're welcome. There's hundreds of videos that show reassembly, but very few that show this process, which is why I didn't bother showing that part.
@Bill-NM5 жыл бұрын
@@Richie2Shoes I hear you...I'll have to go look for them...and yes, you provided a good service in showing that particular part of the process...so thanks for that.
@Richie2Shoes5 жыл бұрын
@@Bill-NM good luck finding one, you shouldn't find it too hard 👍
@brucejenkins68165 жыл бұрын
Wished I had found your tutorial before I replaced the cable the first time. Thanks for taking the time to do this.
@Richie2Shoes5 жыл бұрын
You're welcome
@jamescush42435 жыл бұрын
Thankyou. Totally agree, I've watched 3 videos where they quickly remove ribbon then say "just do in reverse to put together"... Totally different process, this video really helped me. Cheers, James.
@Richie2Shoes5 жыл бұрын
No problem, glad it helped you out
@rodolfocabellobilbao68875 жыл бұрын
Hi, Where can I buy the ribbon cable? I found 2 options in amazon that have good reviews. Can you advice if any of those 2 will work properly? www.amazon.com/Rantow-Flexible-Gimbal-Ribbon-Camera/dp/B075XKND4J/ref=sr_1_3?keywords=mavic+pro+gimbal+ribbon+cable&qid=1558972929&s=gateway&sr=8-3 www.amazon.com/Fstop-Labs-Replacement-Platinum-Flexible/dp/B06XDVFM8X/ref=sr_1_3?keywords=dji+ribbon+cable&qid=1558973080&s=gateway&sr=8-3#customerReviews
@taterman3202415 жыл бұрын
Sir, you are GOD! This is absolutely the BEST video on how to change the ribbon cable. I was ready to check into the nut house after watching countless worthless videos on this procedure, I'm talking major frustration. I cannot thank you enough for taking the time to make this video! Thanks so much!
@Richie2Shoes5 жыл бұрын
You're more than welcome, glad it was useful!
@alyscott33565 жыл бұрын
Best ribbon install vidoe I have seen. Now it makes sense! Other vidoes are vague yours is clear - Thanks
@Richie2Shoes5 жыл бұрын
No problem, glad it helped you!
@SmileyVideography5 жыл бұрын
Great Video, Thank you
@aaweshaminsayyed17225 жыл бұрын
Thanks bud, I will try it out.
@aaweshaminsayyed17225 жыл бұрын
the aluminium base and bottom circuit came in contact with sea water. i Have tried cleaning it with distilled water. the flex will arrive in sometime, ordered it today. somehow it will take 2 to 3 weeks here in india.. frustrating it is. will post update.
@nauticalrob15 жыл бұрын
Excellent description... I looked at some other you tube tutorials to try and fix my mavic, your's was absolutely the clearest and also saved me from whimping out and sending the drone away to be fixed. It also saved me a load of cash, so some day I'll buy you a pint.. Thank you very much Richi TwoShoes..
@Frodokeuh5 жыл бұрын
i still don't know what they're thinking to use ribbon cable outside the housing :|
@Richie2Shoes5 жыл бұрын
Tell me about it, such a poor design. They could have at least covered the cable in a protective sheath
@SiMon-dx9iy5 жыл бұрын
Did you also lose control of the up/down of the camera and get camera shake with a broken cable ? How can you tell if the motor is damaged or the ribbon is damaged ? Thanks 🙏
@nlimchua5 жыл бұрын
very informative but bit blurred tho.
@Richie2Shoes5 жыл бұрын
Apologies for the blurriness, only had an old go pro to film on at the time. Hope it helped
@brickw85995 жыл бұрын
this is thee best video on replacing this cable.
@kaischmidt7306 жыл бұрын
Thank you so much for this tutorial! My Mavic was down since about 4 month, and I never found the time (*cough* courage *cough*) to go through this process. This morning I was determined to finally attempt the operation, and I found your video. The details that I saw in your video, which I had never seen before, gave me the courage to actually do it. And it worked!!! Thanks again, much appreciated!!!
@Richie2Shoes6 жыл бұрын
That's great news, I'm glad it worked for you!
@i-am-ber6 жыл бұрын
Got me out of a tight spot mate thanks!
@Richie2Shoes6 жыл бұрын
No problem glad it was useful
@vichetkfc49816 жыл бұрын
good tutorial and save me a lot for repair cost. and could i know where could i buy the repair tools as yours?
@Richie2Shoes6 жыл бұрын
Vichet Kfc I'm glad it helped. If you go to eBay or Amazon and type in "mobile phone screwdriver set" you will find tools similar to mine. Hope that helps