3 жыл бұрын
3 жыл бұрын
Пікірлер
@charles-336 29 күн бұрын
It's easier to remover that bigger lower hose if you get it started before you pull the ocv screws.
@ethansezai Ай бұрын
Do i need stage 1 tune to put this on if everything else is stock?
@rootz420 4 ай бұрын
Did it make any difference to leakage?
@BhaveshPatel-lt3ht 5 ай бұрын
Thank you guy. You helped me 🎉
@roncurtis8174 9 ай бұрын
0:30 they're T-30. If you try to remove them with a T-25, they're going to strip out
@AndreasRP. 11 ай бұрын
Do you need to drain all the oil from the engine before you attempt this?
@notagti9091 11 ай бұрын
No
@bobdobbs7828 11 ай бұрын
What a pain in the ass. Easier to just get an aftermarket intake after all these years.
@Marcelo-wj9uu Жыл бұрын
o píor HPFP , já troquei 3 vezes o meu , 034 , IE esses vc pode confiar
@TheAestheticEnthusiast Жыл бұрын
Also what size rims, and lowering option do you have? Does it rub or scrub over bumps or when turning the wheel?
@notagti9091 Жыл бұрын
I'm on 19x8.5s +35 . They rub a lot tbh . In the back over bumps and in the front if I turn full lock. I need stiffer coils and to raise it up just slightly
@TheAestheticEnthusiast Жыл бұрын
@notaGTI I need to do more reasurch and learn what all those numbers mean, (total noob here) I know part of what you said, 19in rims but those other numbers are still foreign to me. I have a 2012 R, stock rims, 18's I think And stock ride height. I want to get lower but I don't want to bump or rub, any suggestions? Ps. Thank you for your videos man, you have saved me so much money on labor with your channel, thank you bro
@notagti9091 Жыл бұрын
@@TheAestheticEnthusiast yeah man so you wanna pay attention to width and offset of wheels, as well as get familiar with tire size. Check out willtheyfit.com for more info. Thank you! Glad I can help :). As far as lowering goes, the easiest method would be lower springs but it comes with the least adjustability. Definitely do your research and decide if coilovers, bags, or springs are right for you. For reference I have coilovers on this car. If you are in America , BC Racing is a good coilover brand to look at for getting into your build. Moderate price range
@TheAestheticEnthusiast Жыл бұрын
@notaGTI yeah after a bit of research I an thinking about staying stock wheel and tire size just to save my rims from all the potholes up here in the PNW. I would like to figure out what offset will bring the tires a little closer to flush without any poke. As far as lowering im thinking the H&R sport or super sport, (if that is a thing) on bilstien b8 shocks and struts. Ive heard using lowering springs on stock struts can wear them out a lot quicker. Plus if im gonna be up in there I might as well change everything out to save myself from having to do it again when the oem stuff wears out. I need to get on timing belt maintenance before any of that though. Lol
@TheAestheticEnthusiast Жыл бұрын
What tail lights are you running? Those are dope
@notagti9091 Жыл бұрын
Just some euro tails . Not sure what brand I bought em off Facebook
@chad6876 5 ай бұрын
Its crazy that these didn't come standard in the states
@kordfaucher7623 2 жыл бұрын
I definitely broke that hose 🥲
@CR15PY1 2 жыл бұрын
Is that the correct fill whole? I always wanted to change my trans fluid. I’m at 216k miles lol do I change my fluid would my gears slip a lot?
@notagti9091 2 жыл бұрын
Do you have a manual or automatic
@CR15PY1 2 жыл бұрын
@@notagti9091 manual 6 speed
@notagti9091 2 жыл бұрын
@@CR15PY1 honestly being at 216K if you’re not having any issues I would just leave it. What car?
@DaddyC445 2 жыл бұрын
🐌:Tututu
@calebwilton2112 2 жыл бұрын
Great video helped me with my first mk6 install
@notagti9091 2 жыл бұрын
Hell yeah man glad to hear it!
@sebbegustafsson4681 2 жыл бұрын
What rotor wheels are you runnin? What rim size and ET?😍
@notagti9091 2 жыл бұрын
19 x 8.5 ET35
@sebbegustafsson4681 2 жыл бұрын
@@notagti9091 no fender mod? No rubbing?
@notagti9091 2 жыл бұрын
@@sebbegustafsson4681 fender liners cut, fenders rolled, running 225/35. Rubs sometimes.
@wyro5o 2 жыл бұрын
How’s this thing holding up now?
@notagti9091 2 жыл бұрын
Pretty well! No exhaust leaks that I can hear but sometimes I can smell exhaust in the cab with the AC off on heavy accel… get a different gasket than the one that came with the eBay pipe and you should be good !
@wyro5o 2 жыл бұрын
@@notagti9091 got an oem gasket coming with mine. Have you been under and checked the flex section? Usually those are suspect on these cheaper downpipes. Thanks for the reply man!
@notagti9091 2 жыл бұрын
@@wyro5o I was under there a lot when I did my clutch. Didn’t see any tears or anything and it doesn’t sound like it is dumping under me. Flames come out the pipes on 2 step haha
@wyro5o 2 жыл бұрын
@@notagti9091 bad ass man. I almost forgot to ask, did you use an o2 spacer or defouler? Or did the tune take care of the CEL?
@00Pinkcup 2 жыл бұрын
i got a ebay downpipe too, honestly not worth spending a lot of money on a downpipe, if it gives me power im happy.
@bryanmessi6400 2 жыл бұрын
I got a mk7 golf r 2016 manual what gear fluid does it take
@gregprevite8548 2 жыл бұрын
Hey. Question as I may have to do this soon. What made you choose replacing the stock pcv as opposed to ditching it for a catch can? Thanks in advance
@notagti9091 2 жыл бұрын
Catch cans can have issues with freezing in the winter. They also can cause excess pressure in the crankcase which can lead to premature leaking of the rear main seal.
@rickyvargas9522 2 жыл бұрын
Keep it bro
@cherokeebriggs510 2 жыл бұрын
What tune and how much did u notice hpfp upgrade
@francoisloriot2674 3 жыл бұрын
anyone knows the correct torque spec for a STOCK PCV valve? The 8 lbs-feet mentionned in this video apply to this aftermarket valve. I'm afraid I over torqued the oem one :(
@Memoloks710 3 жыл бұрын
Rip lil peep 🕊 Dope edit man 👌
@kirchhoff1814 3 жыл бұрын
fitment's perfectttt...
@D3nn1s 3 жыл бұрын
Still the best looking golf generation imo <3
@Anon_Fox 3 жыл бұрын
hoping this helps with my misfires on all 4 and p0507 code for higher than expected rpm idle. my car is having the rev "hang" issue when coming to a stop in neutral where idles fluctuate. quick question. My normal vacuum on my R is -20. but since having these issues idle vacuum has been like -23. Im guessing since pcv valve controls crankcase pressure into manifold that it must be broken since vacuum is more than normal. I would have thought a boost leak but vacuum would be lower than higher. does my logic make sense?
@notagti9091 3 жыл бұрын
To be completely honest I am not sure. Sounds like a PCV issue but as far as that extra vacuum I’m not sure if added crank case pressure due to a failing PCV would cause it.
@rootz420 3 ай бұрын
Its pcv. You can confirm by pulling dipstick to relieve pressure.
@infiltr8 3 жыл бұрын
I just installed this today. @ 14:27 theres one more hole thats covered on that pipe with a rubber piece that fits over the hole. Does that pipe @ 25:43 fit over that last hole?
@notagti9091 3 жыл бұрын
Any holes that aren’t the one that connects to the DV hose should be plugged with the threaded plugs that came in the kit unless you are running a hybrid turbo
@tube2892 3 жыл бұрын
wow what tune is that?
@notagti9091 3 жыл бұрын
IE Stage 2 +
@cherokeebriggs510 3 жыл бұрын
Just did it to mine too bro
@notagti9091 3 жыл бұрын
Good shit, how many miles you got on your car?
@DoubleRichrd 3 жыл бұрын
Is it possible to just install downpipe and leave the stock midpipe? Thanks for the help
@notagti9091 3 жыл бұрын
Not unless you cut the existing piece and weld it to the new downpipe. As you can see at 15:03 it’s one piece stock
@DoubleRichrd 3 жыл бұрын
@@notagti9091 ahh I see, thanks for the response
@stephenjonny6369 3 жыл бұрын
Dr g to Dr r CT Dr just us from all all uio go see a to to o to eat
@JoseReyes-ec6dc 3 жыл бұрын
Everyone has their own opinions/preferences. 3% rear 15%fronts(or 5%) 35%windshield is the perfect combo
@notagti9091 3 жыл бұрын
That’s pretty dark!
@Pinozcyclezandridez 3 жыл бұрын
Did u do your own clutch install?
@notagti9091 3 жыл бұрын
Yes… however the pressure plate bolts came loose and I took it to a shop to have it done professionally. I will probably be making a DIY video to help with a clutch install. However I recommend getting a clutch professionally installed in this car.
@cherokeebriggs510 3 жыл бұрын
Damn I just ordered that one
@notagti9091 3 жыл бұрын
Mines been fine for the last couple thousand miles
@cherokeebriggs510 3 жыл бұрын
@@notagti9091 sweet bro good to hear I accidentally ordered a gti down pipe for my R last week and now I have to wait another week while my cars at dealership haha I had them put on a cts turbo ko4 replacement and I’m going stage 2 light like you have
@notagti9091 3 жыл бұрын
@@cherokeebriggs510 nice dude! I’d recommend buying a more high quality downpipe gasket for your car. ECS and others have them. Goodluck with the install! Message me if you have any questions
@gateworm2903 3 жыл бұрын
hi, do you get a knocking kind of sound after each rev?
@notagti9091 3 жыл бұрын
Not a knocking but I defitniely get a “chu chu chu” sound
@Quiny7769 2 жыл бұрын
I just did my intake and yes. I get that strange little knock after the rpm fall back down to almost idol.
@gateworm2903 2 жыл бұрын
@@Quiny7769 So after a while of researching I’m pretty sure it’s normal. I’d describe it more as a popping noise now and from research it is caused by the DV opening and closing whenever you rev/accel. I have a 5” IE pod so it’s quite loud/amplified
@leonidashappy9763 2 жыл бұрын
I have this knocking after install this intake on my scirocco r. Maybe is normal?
@eshawn1216 3 жыл бұрын
Nvm i was confused 😭
@eshawn1216 3 жыл бұрын
So we dont need the torx bits?
@eedrays 3 жыл бұрын
t30 for fuel pump bolts. crucial
@InFiNiTe2013 3 жыл бұрын
Are the fritos required?
@makaroner01 3 жыл бұрын
Hi man i wonder if its stock? Can i get those pops with stock golf r mk6 if u have that downpipe
@notagti9091 3 жыл бұрын
I’m stage 2 with pops and bangs! You will get a lot less pops on a stock tune
@makaroner01 3 жыл бұрын
@@notagti9091 okey thanks man :) but downpipe will still make it sound better even with no tune right?
@notagti9091 3 жыл бұрын
@@makaroner01 yes but you will need to tune or get an O2 spacer for the check engine light
@makaroner01 3 жыл бұрын
@@notagti9091 okey so in those video clips u put in ur video the small samples did u hade the pops and bangs or did I do it after the clips u put it and second question will my car behave strange with the downpipe or will it just show that something is wrong, and third thing that one I bought comes with and hole to plug in the o2 sensor will it still be a check engine light or how does that work sorry for many questions love it vids btw :)
@notagti9091 3 жыл бұрын
@@makaroner01 Sorry for the late response!! I had pops and bangs tune in these clips. Car will not behave strange, it may run a little rich as the o2 sensor will pick up that there is “too much” flow through the exhaust. Definitely should pair the downpipe with a tune! You will get a CEL with a plug in place of the sensor or if you run the sensor. I ran mine with no tune for 300 miles and I had a CEL with o2 sensor plugged in
@isaiahrayos660 3 жыл бұрын
Thank you for this video bout to install the cts tbe when I installed my coil overs I was like going back in forth with tools but I appreciate the beginning of this vid fr
@notagti9091 3 жыл бұрын
Awesome man, glad I could help!
@isaiahrayos660 3 жыл бұрын
@@notagti9091 lemme get that hat 🧢
@dubburnsy1209 3 жыл бұрын
Put this on my car ruined the intake manifold in two weeks
@notagti9091 3 жыл бұрын
How lol
@dubburnsy1209 3 жыл бұрын
@@notagti9091 so I’m getting error code P015 and I’ve had the thing on my MK6 GLI for two weeks now my car is misfiring
@notagti9091 3 жыл бұрын
@@dubburnsy1209 did you retune the ecu
@dubburnsy1209 3 жыл бұрын
@@notagti9091 no I didn’t but from what I gathered the intake manifold is highly faulty in the TSI 2.0 engines
@notagti9091 3 жыл бұрын
@@dubburnsy1209 as in the intake manifold gasket fails?
@GianlucaM235 3 жыл бұрын
Hey bro is this on a stock exhaust and just the catless downpipe?
@notagti9091 3 жыл бұрын
Catless downpipe, non res midpipe to stock catback yes
@GianlucaM235 3 жыл бұрын
@@notagti9091 and the non res mid pipe came with the downpipe right?, if you have a link for it I’d appreciate it thanks again!
@notagti9091 3 жыл бұрын
@@GianlucaM235 yup. www.ebay.com/itm/254059145086
@cracklespinner4802 3 жыл бұрын
What ebay brand is the down pipe? And thanks for the video!
@notagti9091 3 жыл бұрын
www.ebay.com/itm/254059145086
@TheBigsmoke123 3 жыл бұрын
i would get one but 130+ shipping is kinda gross
@notagti9091 3 жыл бұрын
That ain’t shit for exhaust parts 😂
@David-bt1ms 4 жыл бұрын
6 years!? Wow that's a long time. I haven't even had mine for a year and planning on doing full turbo back exhaust but maaan they are $$$$. I just want the power and not too loud but idk there isn't anything really like that out there. Was planning on just buying downpipe first and after getting cat back exhaust so I don't have to pay as much at one time. ( Still living at home so don't get to keep all my mola lol) but even if I would do that it's more expensive with shipping. So yeah I wish I could find a nice alternative and if I don't find nothing I'll probably end up buying EBAY downpipe😂👌 yeah if your doing internals for hpfp look into VIS, I heard they're really great but I haven't done it myself so yeah don't blame me if it doesn't meet up to your standards 😅
@notagti9091 4 жыл бұрын
Hey man! I know it’s wild! I’ve loved every second of this car. I definitely would avoid a full turbo back to be honest. I think buying a downpipe first is a great move, that’s where most of the power gains come from anyways. After that you can always go custom! Otherwise theres lots of aftermarket catback options as well. But yes I would recommend the eBay route if you are trying to save some money!
@Ragged.09 4 жыл бұрын
First I win. I actually ordered the same downpipe (I think? It was 199 off ebay without any reviews so fits the description lol) so ill have to see how it sounds. From this video I am quite excited for it. The only problem I see is that my exhaust, a neuspeed catback, is a 2.75", the downpipe is 3" so ill have to order a exhaust clamp that fits those. And I just heard you have stage 2 light? Nice! I was literally going to get the same thing. I'd love to hear you review that. Did you have the downpipe without the tune for a bit? If so was it popping without the tune? Keep posting homie!
@notagti9091 4 жыл бұрын
Hey man! Thanks for the comment. It’s no problem about the catback, just buy a 2.75 in clamp. Usually one end is a little wider than the other and I used my impact gun to tighten her all the way down. No leaks at all. I got mine from NAPA auto parts. I’m definitely going to be doing a review on IE and their tune soon. I did have the downpipe for like 2 weeks without the tune. There were not nearly as many pops when I had it on the stage 1 tune. Definitely sounds a lot better with the tune/pushing more boost!
@Ragged.09 4 жыл бұрын
@@notagti9091 awesome to hear! I’m looking forward to that review. I think I’ve already decided to buy the tune tho, the stage 2 light just seems like such a good option with the downpipe
@notagti9091 4 жыл бұрын
@@Ragged.09 definitely a good call! The nice thing about Integrated Engineering is that you can upgrade to Stage 2+ for only 50/100 (depending if you want launch control) once you do your clutch and fuel pump internals.
@David-bt1ms 4 жыл бұрын
That is why I don't winter drive it😂 jk I'm planning on next year but yeah love your videos watched em all👌 there's really not much Tutorials on mk6 golf R. Plan on doing a full fluid change but there's not much out there for vids. I just got the car last year summer so haven't had it for that long, also a red one😍
@notagti9091 4 жыл бұрын
Haha hey man I really appreciate the kind words! Might be filming a new video tonight!! I gotta keep it up haha. If you need any help with fluids ive done em all except coolant and I still need to do my rear differential. It’s all super doable though!
@abellegaz4622 4 жыл бұрын
I also had a close call with some friends in a mk6 golf R, we where going pretty fast.. 140+mph and 3 cars got in the middle outta nowhere... It was scary but at the same time the adrenalin of the moment was very very strong... Hard to explain, the best part is that I have it on video hahaha
@notagti9091 4 жыл бұрын
Haha that sounds wild man! Never had anything like that, definitely hit some pretty small gaps going pretty fast though
@Leavemealone- 4 жыл бұрын
Where you from
@notagti9091 4 жыл бұрын
I am from Minnesota but I’m living in Portland, OR.