We just put a motor from one to another and we can't figure out where a clip connects to on the left side of the motor. Could anyone possibly help me out here? Thanks

My man thanks for the video 🖤

about to try his my rpm are hitting 2000-3000 at IDLE WTF plus the lighting bolt

What’s the set up for the exhaust flow masters ?

That 3.5 sounds like an SRT...

Thanks...doing this first thing in the morning, I was looking at the PCM replacement stuff...but im sure to check this cause the old filter was brutal and this part was never cleaned

I cleaned it but my car still doing it

Can i still drive my car? It’s not overheating but the fan is on..

3x4??? What the hell???

Where did you get the tips

your a loser. oh.. I already changed it but here is the video.... kick rocks

idk if this fixes my issue, 2010 Charger 3.5 V6, my temp is usually at 155 to 185 depending on outsite temp when its supposed to be 195+ no matter the ambient temp. it takes TOO long to warm up, even if its 100 degrees hot outside, itll warm up at idle at 205+ until the fan kicked in forcing it back down to 185, but as soon as i start driving 45+ it goes down QUICK! i mean from 205 to 175(depending on ambient temp) under a minute, especially highway speed 70mph. at 60 degree weather at 70mph most she'll warms up is 170 to 175 untill i cranked the heater on, down she goes to 158 or 155. again depending on ambient temp, Thermostat and water pump has been replaced and is STILL doing this crap. (i got these digital temp read out using Andriod Torque app)

Very helpful thank you so much my brother

Much appreciated on this knowledge transfer thank you stay safe

“Look almost brand new!” Immediately shows it and looks like shit😂 Appreciate the video tho, going to clean it tomorrow

I’m gonna try cleaning my TB i get random cylinder misfire already swapped cam sensor. Next is crank sensor if this doesnt help

Did you install the spoiler yourself?? If so, how

Do you disconnect the battery also I was asking because that would reset it like there wasn't a code

do anyone know what size socket did he say 19mm? what does the lighting bolt have to do with this mines comes on

This guy explains everything good. I looked through a lot of videos and to this date I still can't find a similar video for this part and year for 2007 Dodge Charger.

Some helpful advice to use needle nose vice grips for those factory style hose clamps.

I want my charger to sound like this, what set up would would I ask for when I take it to the shop?

Yo you think this works on a 08 charger

P2181? Code ?

How do I drain some fluid from my 2010 before I do this

When cleaning your throttle body do you have to relearn or recalibrate it before driving again?

Is it a dual exhaust or single?

Did you turn the key to “on” twice? Is that how the check engine light went off ?

What's the issue does a car have to had to change that. Coolant sensor?or what benefits gives you!

I have a 2006 3.5 charger with 211,000 original miles. What all have you fixed on it. Mine runs until it warms up and goes dead. I have changed air temp sensor, throttle body, ECM spark plugs and coil wires fuel pump and TIPM. When I get my stimulus its going to the dodge dealership.

Do you screw the sensor all the way in?

You sprayed that liquid inside the intake manifold to clean it too?

Thanks bro I’m trying this tomorrow morning because my car has been very sluggish and it’s because of a small lighting bolt

Is that the original throttle body after over 200K miles? , amazing

Can you help me, If yes, please send me your mobile number, i will send you video by WhatsApp

I have issue in RPM, is probably proplem in throttle? Is need to clean?

Hello friend, thanks for the video that measure is the one you use to remove the sensor

you are a real one for showing the slow takeoff i’ve been wondering how loud it is if you’re trying to be quiet not tryna wake my girls parents ever night when i leave

Thanks. I needed this. I got a 2006 300 touring 3.5L and it's the same engine as yours

Thanks bro, 2010 300

I cleaned my throttle body and made the mistake to move the plate now its running hella rough any suggestions

How did you get the engine check light to go off? I changed my throttle body but the engine check light is still on.

I have asked a few others who say I need to bleed my coolant before changing are you sure you do not need to?

Hey, I think I have to change mine. Did you have to bleed the air out and add more coolant afterwards? Most videos and the repair manual say you do, but I don’t see why it’s necessary..

How do you know you when you need to change it?

Would it be located in the same spot as 2012 dodge charger SE?

Your charger sounds badass 💪🏾💪🏾

Thanks🙌🏾I was wondering where it was located at.

Thanks bro. I needed this. 👌🏾👌🏾👌🏾

Thanks bro