PrintLab

Пікірлер

@estilan 6 күн бұрын

You are a fantastic group of young folks bringing true design iterations and help to someone in need. This is a great presentation, and I hope you all move forward with your interest in design and helping people improve their everyday lives. I'm proud to see you making a difference in the world!

@bazzatron9482 8 күн бұрын

This wasnt what I was looking for, but this sure put a smile on my face. Great work here.

@v10climber 10 күн бұрын

I'm trying to use this tutorial to make a folding tray with compartments on the inside. Once the halves are split can I just make a sketch on each side and add the compartments? Or should I do each side in a different file then join them together in a separate assembly file?

@weareprintlab 9 күн бұрын

Yes with Fusion you can do all this within the same workspace - no need for separate assembly files. Feel free to email your final design to [email protected] and we can check it over for you.

@cuthwulf 22 күн бұрын

Because nobody wanted time to see each item with a description...we all just wanted a music montage and no idea what was created.

@weareprintlab 22 күн бұрын

Hi there! You can view the full winners' announcement and all the submission videos on our blog here :) weareprintlab.com/blog/makeable-2024-winners/

@LB-vf2hm 23 күн бұрын

Watching this on 2x speed and I feel like I'm being waterboarded

@weareprintlab 22 күн бұрын

We just gave this a go and wouldn't recommend it either 🤣

@evilc2048 23 күн бұрын

I would recommend only modelling half of the box. It will save a bunch of clicks, and also allow the sketches to be cleaner. In general, a good rule is: Never mirror at the sketch level if you don't have to. Always mirror at the body level if you can. Also, at 4:19, you have a line directly over the top of another line, which is not good practice IMHO - instead you should have split the existing line into two

@weareprintlab 23 күн бұрын

Thanks for the tips and feedback! We'll take another look at our workflow :)

@thehangardesigns Ай бұрын

Great tutorial. Music is calming And not overpowering, and I love the step graphics!

@weareprintlab Ай бұрын

Thanks so much, glad you enjoyed the tutorial!

@drunkbitchezzz Ай бұрын

How can I make this! This would change my fiancés life

@eransolid Ай бұрын

nice, hinge side on printing bed when printing, I assume?

@weareprintlab Ай бұрын

Thanks! That's correct, hinge side down :)

@hodeiak Ай бұрын

Great Tutorial Jason! 👌🏼

@shiramechanic4424 Ай бұрын

Any updates regarding when you will post the print files? Can’t wait to use this!

@weareprintlab Ай бұрын

Hi there! Please can you send an email to [email protected] and we'll have our team get back to you about this :)

@dannyperkins4220 2 ай бұрын

God bless you keep up the good work. It is very inventive and original.

@milanmilicev 2 ай бұрын

Thank you for sharing your process. Looking forward to the rest of the videos in the series.

@bethshupe3710 3 ай бұрын

Can this be purchased somewhere or not? I know someone having major hand surgery who needs something like this?

@weareprintlab 3 ай бұрын

Hi there! At the moment we only offer the files for people to 3D print. If you know anyone with a 3D printer (check out local libraries/makerspaces), you can send them the link to the files - www.printables.com/model/753450-drag-assistive-writing-and-drawing-device. If you are based in the US/Canada, you can check out www.makersmakingchange.com/s/, who 3D print devices for free via their volunteer network. Hope that helps :)

@user-du6hd5nl5i 4 ай бұрын

Are you using DIY kits or you have your own way of growing? I want to try it without ordering anything,just getting the products myself.

@weareprintlab 4 ай бұрын

Hi there! For this project, we used the kits from grown.bio/. You can certainly experiment with growing mycelium from scratch though!

@iainmacronald-lynam6663 4 ай бұрын

Really good device, what size spring ? as it's not shown on thingiverse page. thanks.

@weareprintlab 4 ай бұрын

Hi there! We reached out to the designers and here is the response: We used a .25" bar stock (a pen or pencil would work too but having a long bar at least 18" is key to spreading things out.) then made a really long spring and cut it to fit. We just used a heat gun and took our time, it took a few attempts before we figured it out. The coil spacing was the key, make sure to keep the coils spread out a bit it seemed to work best.

@garrygordon4680 4 ай бұрын

✌️ "Promo sm"

@denilsonms2 5 ай бұрын

Rob. Thank you very much for sharing your idea. I'm from Brazil and I have a son with cerebral palsy. I'm already 3D printing the DRAG, I believe this will help us a lot with it. We need more people like you to make a better world. Count on me to test and print more parts, let's help more people together.

@weareprintlab 5 ай бұрын

No problem at all! Do let us know how you get on with the DRAG device :) It'd be great to hear any feedback

@amaliejensen16 5 ай бұрын

What 3D print filaments are suitable for making the cast mould for the mycelium to grow in?

@weareprintlab 5 ай бұрын

We used PLA for our moulds and they worked fine - just remember to give them a wipe with ethanol first :)

@hh126 6 ай бұрын

actually pretty useful, but how much harder was it to play chess without a visual of the board?

@weareprintlab 6 ай бұрын

Hi there! We're not in touch with the designers anymore but that's a good question and we're sure it would take a lot of practice. The full sighted play could also play without the blindfold :)

@syedaameer8941 7 ай бұрын

Hi..it was nice project...can I get the design information

@weareprintlab 7 ай бұрын

Hi there! We are going to reach out to the designers to see if we can get this for you. Please can you send an email to [email protected] and we will contact you when we hear back from them :)

@saadsalvagegarden 7 ай бұрын

beautiful work! thank you for sharing the iterative steps and detailing the design considerations. Excellent work by the original young designers of the Perfect Pencil Placer! I'd love to try out the model with our assistive device users at our little makerspace in Singapore, are the models shared?

@weareprintlab 7 ай бұрын

Thank you very much for the kind words! Yes the designers of the Perfect Pencil Placer were really amazing. We're not sure how they achieved so much in just a couple of days! And yes the models will be shared soon. We are just doing some final checks and creating the open-source documentation for it. We'll comment back here once it is available :)

@adrianofattizzo8016 7 ай бұрын

Brilliant! Thanks for showing the usual process including design flaws, successes and enhancements! A design is never done - that's how I usually feel when I develop something. And sometimes I get on other people's nerves. 😄

@weareprintlab 7 ай бұрын

Thanks so much Adriano!

@GROW_YT_VIEWS_002 8 ай бұрын

Fire video man

@mrechambers2535 8 ай бұрын

Where's the best place to get Mycelium from for use in schools?

@weareprintlab 8 ай бұрын

We highly recommend Grown.bio's GIY kits! We had no trouble with it shipping to the UK if that's where you're based :)

@LJSheffRBLX 11 ай бұрын

Your content is like a warm cup of creativity on a cold day.

@weareprintlab 11 ай бұрын

Thank you so much!

@1c3c0ldw4t3r Жыл бұрын

cool project thanks for posting!

@jaybekka Жыл бұрын

Great job, do you have the print files available? I would like to make some for my dad.

@weareprintlab Жыл бұрын

Hi there! The print files are available here :) www.thingiverse.com/thing:5335693

@EveFears Жыл бұрын

Great job men! I work with the visually impaired and am looking for a design like this. Do you sell your product?

@weareprintlab Жыл бұрын

They are amazing aren't they! Would you mind sending an email to [email protected]? We will see if we can help out with your request :)

@caseybatz9006 Жыл бұрын

【p】【r】【o】【m】【o】【s】【m】

Ең жақсы KZbin

Пікірлер