thanks for all the useful info, feel more confident about doing it now

Not a very good video, you tell what to do but you don't show actually doing anything🤦‍♂️🤷

Some of these trucks (2002 anyway for sure) were built as OBD1. There are only two upstream o2 sensors. They’re all the same size and connection ends. So if you only have two, don’t sweat it. The heavier gross weight trucks got away with emissions standards for a while. You can scan for codes via an obd2 port under the dash, but your o2 sensors will show a constant “under test” or “not ready”. Mine always passes the required state emissions test, even with these readings.

Certified tech here. Don’t ever use a steel punch to remove or install the fuel pump lock ring. Steel on steel creates sparks and will blow up the gas tank and possibly the whole car. Always use a brass or bronze punch with a hammer to prevent any sparks.

I'd like to see you remove the back spark plug work. I am learning to care for my own. Thank you

What is gapping? What brand is recommended for Honda?

Thank you so much! Awesome tutorial! I followed your steps and worked like a charm.

The hardest part of this job for me was trying to get that bottom trim piece to snap back over the steering wheel adjustment arm thingy. Thanks for a well detailed how to video!

I wonder if this will work with an 2003?

Jeez make Real easy why don't they...

Great info. I was going crazy, I filled the tires, learned about inflating the spare & did that. Drive around & it just would not go out! Thank you!!

👍👍

very informative and the facilitators voice comes across as very intelligent. Has a school teacher vibe! I like it.

Huge thank you! Took me almost an hour to finally find someone who knows what they’re talking about. Not 1 forum online has the right location of this sticker. Again, thank you

probably better to just get a cheap fuse/relay tester instead of taking a chance shorting out your fuse box

2006

Thank you much

Wow!!! Thanks for taking the time to save us all the money!!!

Thank you

What about the manifold gaskets should they be replaced...

Great job you explained everything very well and i completely understood without any doubt or troubles 👏

Very helpful

Fantastic job describing

Thank you! Husband is very impressed with me right now. 😅

Hell yes love the video

Thank you is it for the 2012 acadia

dont forget to bleed the coolant. its a process from inside the car.

Look for all those that want to do this clutch job their self . Set your vehicle on blocks and instead of cutting the torsion bar xcross member support ( 🤦) or taking the torsion bars out like it calls for in the book which is a job in itself. Here's a hack for you-jus take the four bolts out of the cab that mount the cab to the frame jack up the back of the cab and put some wood blocks between the cab and the frame. This will then allow you enough room to be able to drop the transmission with transfer case still attached and slide it back giving you enough room to be able to get into it to change your clutch and everything else.

Wonderful video. Please keep it up. Best video ever.

Thanks Bro!!

I needed this video 3 weeks ago. Had to pay someone to take my back seat apart to open my trunk. But I never fixed it😢 I looked online and your KZbin video pops up🎉. I run outside to my car and BAM!!! My trunk opens!!! Thank you!!!!!!

I have a question! - I have a 1998 Toyota Camry that both rear doors don't open from the inside out but they open only from the outside - Replacing the handles would fix my problem by any chance? - Please advice and thank you in advance.

Thank you!!

This is probably my problem too. Thanks for your tips.

Thx beautiful video

Thank you, worked…

😂ty greathelp😊

I was wondering I bought a dodge Durango it’s 2004 I bought it for 500 dollars but he told me the rain storm the water got in the crankcase and before I bought it been sitting 7 years can the truck be fix I just want to hear yall advice I shouldn’t by it

Helping

Thank you

Why would the engineers design this? Do they believe the relays never go bad? They apparently have a problem with people working on the people's car.

Do you know why the pump on Amazon is way cheaper than the stores?

Thank u for this video and yes it is very helpful.

I asked about a 2002 Ford ranger you show me a 2004 explorer no help at all

Thanks . Needed that info. I have the exact same truck.

Thanks for the location on the fuse box behind the fuse box

is the fuel pump fuse same as the fuel pump relay ?

Need to replace your affiliate links. Pump shows unavailable on amazon.

Thanks for making this video. Just did this job and your video made it 10 times easier

💪😎🇺🇸