Bro mine just went out . Seen no videos came along yours and bingo problem fixed,
@bplowden5 күн бұрын
Thanks Bart 2 minutes my ass
@barbaramellin58806 күн бұрын
The noise is a SAFETY feature. This is a dangerous thing to do. Seniors, visually impaired pedestrians, children and people who are distracted (on phones!) NEED to be able to hear your car in crowded parking lots and driveways.
@DSPANFilm9 күн бұрын
Thanks! I liked your bird deflector 😅🙏 08 Grand Marquis ❤ No Heat. Major blunder for Panther Series. I bought a 500W RoadPro heater. Hardwired. Done. Two minutes!
@RandJPhoto17 күн бұрын
Thanks for this brief reminder. I set the lever on my friend’s 2010 Mercury Grand Marquis to AC last year. It recently flopped back to heat and I was looking for a reminder on how to get to it.
@kevingu310621 күн бұрын
How can I get the traning files, you can shared with us?
@Civilpat26 күн бұрын
I am very curious: what year is your Ford CV? Thanks.
@zacharyjohnson47427 күн бұрын
FOR THE LOVE OF ALL THINGS GOOD YOU ARE NOT SUPPOSED TO PUSH THE PLASTIC L it’s a little metal piece under the L shaped plastic thing. I used a buddy and a knife to push the whole contraption up. Once you figure it out you are gonna think “wow this guy in the video explained it wrong”
@imaSoldier187Ай бұрын
I don't know how people get their hands in there I got some big boy hands its a pain in my ass to get in there. I'll see if I can reach in there from another angle I have a few other things in the way though ill move them so I can maybe slide my hand in there better. You can also use a shorter screw driver and slide it under the whole actuator at that same corner left of the screw mount and pull down so it goes up makes it easier for some.
@yousufsiddiqui6680Ай бұрын
I was going to bypass the heater code....but ended up doing this....My grand marquis 2007 would start on AC and then in few seconds heat would start even though i have temperature on 60....what i did was started my car made sure AC is working before it could turn to heat i turned the car off and kind of similar to this video but just removed the connector on top of the actuator...now my AC is working and because no connection to actuator it cant do anything....i live in south texas so I dont really care about heat.
@CryptoEnvironmentАй бұрын
Harder than I thought but it’s probably cause I never work on cars at all. I got it though, thanks a lot!!!
@firebug18922 ай бұрын
Get to the point!
@andrescadabid30222 ай бұрын
Definitely, you can’t move it with your finger.
@andrescadabid30222 ай бұрын
That’s shit did not move or budge and I think this is a stupid video that actually mislead and doesn’t improve anything in your car. this are the dumbest videos any one has done to think that this fixed ur A/C vents
@danielmcqueen10242 ай бұрын
I did the same thing to my 2004 LX but I'm left handed and took 5 minutes to pull the air bag and flip the lever :)
@translateslowly2 ай бұрын
Nice job. I did something a little different. In the summertime (TX) I disconnect the heater hoses from the firewall and connect them together using a hose splicing kit thing. I plug the heater core at the firewall with duct tape so no debris or anything can get in there. Come winter I put the hoses back. Easy peasy. I love my 2010 Mercury Grand Marquis just coming up on 100,000 and this is the only problem I have had so far. Little bit of a pain figuring out just when to swap it over but I'll be damn if I'm taring the dash out to fix this $10 part.
@yousufsiddiqui6680Ай бұрын
I am planning to do the same....any issues with the vehicle heating or anything like that
@translateslowlyАй бұрын
@@yousufsiddiqui6680 Only when I forgot to tighten down a clamp and it blew off going down the freeway. Other then that it's worked fine for the last 3 years
@matthewgonzalez78382 ай бұрын
Haha so I have heat && it’s blowing through the defrost and feet hopefully I get my cold ac back lol
@HOWTO-vs5ks3 ай бұрын
very helpfull
@justineaves74183 ай бұрын
Sorry I’m a little confused. Does this change the temp, or where it’s blowing from? I have ice cold air and equally great heat. But it only blows from the defrost vents.
@MajorUpgrade7603 ай бұрын
Hello sir! I am extremely happy to have found this video you created. I have a couple questions I would love to ask you. What type of machine is used to put this image onto foil? Can I use this software to create what I am going to call 'layers' of holographic imagery on foil as well? I am fascinated by this subject of creating custom holograms on foil and want to learn about how I can accomplish doing this. My goal is to learn how they made the 6 (that I've counted) different effects that look like layers on a vintage pokemon cards. These effects are "pop out of the image", "sink deep within the image", "move behind other holograms and ink", "grow and shrink", "have different color points from the same viewing angle", and the classic "change color" though not all of the foil changes color. If you would like to take a look at this short to understand what effects I am referring to, you may search "Pokemon base set appreciation post. Chansey unlimited holo." From "cardmonsta" When you are not busy. I do apologize for the long message, but I've searched far and wide to learn about this and you are the only man that may actually understand what I am referring to.
@stevenagebenwhiteАй бұрын
Did he ever come back to you?
@kevingu310621 күн бұрын
you need to buy the film, this video is tell you how to make the 3d on the computer, not the mass production, it seems you want to how to produce it, correct?
@MajorUpgrade76021 күн бұрын
@kevingu3106 yes the end goal is to be able to create custom design holograms on the computer, then make foil with my custom designs. So I do also have the desire to learn the software to also create the holograms.
@mrflyman1234567892 күн бұрын
@@MajorUpgrade760 The machinery for foils is called hot foil stamping machine. There are smaller sized one and industrial ones. Search the web for more info. Hope this helps
@RogerFernandez-es2hs3 ай бұрын
Hello... I do all the steps correctly but in the workflow of the tasks I get [NO DOCUMENT], is there any previous configuration to do? Thank you!
@RogerFernandez-es2hs3 ай бұрын
Hello... I do all the steps correctly but in the workflow of the tasks I get [NO DOCUMENT], is there any previous configuration to do? Thank you!
@suchclevername3 ай бұрын
Thank you!!!
@Formadvpart2BillionaireGuillen3 ай бұрын
Global vision media copyrighted license report datalinked copyrighted legally owened by Joe Billionaire Guillen
@seansimmons59623 ай бұрын
going to try it, just dont completely understand. when i take out the screw and lift it, the lever is under it? can you see it or just feel it??
@Boxaizco3 ай бұрын
good video, thank you!
@wedothis15634 ай бұрын
Does it matter if it’s automatic or manual actuator?
@AhmedAli-pg6py4 ай бұрын
where to get the excel sheat
@brokedowntruck58594 ай бұрын
I did this today and it worked but only for a short time and it changed back to heat again. If I do this again and unplug it next time will it last?
@ActiveKamoKiller4 ай бұрын
saved me this summer!!!
@ActualNonsense4 ай бұрын
noi can’t get it to turn man can you give me a tip?
@TexasBaker4 ай бұрын
Just discovered this myself after hitting the forums and youtube for days, I really didn't want to pull the dash because my wife relies on the the vic and I don't trust that I'd be able to get everything back together in time to not cost one or both of us a day of work (or me a night of sleep). It's really this simple though, but you're gonna need to put some strength into it to get that actuator lifted, for nearly 20 year old plastic it sure as shit is still rigid as hell. Good old Ford.
@curtgibson98725 ай бұрын
kzbin.infoOfzhzij9NJ4
@debnathmriganka20105 ай бұрын
Very helpfull video sir
@amansaini90245 ай бұрын
How to open 2 file in artioscad
@LunaErosStudios5 ай бұрын
Good idea if you intend of leaving it on hot or cold for each season but doesn't help if you want to actually fix it.
@Name-rx5gd5 ай бұрын
Thank you so much! It's cold out here in NY. My hvac got stuck in could after after disconnecting my battery. Once again...THANK YOU!
@grizzly51885 ай бұрын
Thank you. Did this on my 2010 It's a little valve under the black piece that moves. I was trying to move the black piece. But thanks again, a/c ice cold NO mechanic bill. 😅
@OHUQTU5 ай бұрын
You have given no indication of what years and models this applies to -- do you even know? The Panther chassis covers 1979 to 2011, Ford Crown Victoria, Ford Crown Victoria Police Interceptor, Mercury Grand Marquis, and Lincoln Town Car. Automatic climate controls and manual (Police Interceptor) have different systems.
@Civilpat26 күн бұрын
I am also very curious: whether this method applies to Lincoln Town Car 1997? I removed my glove box by cannot get clear access to the blend door actuator.
@Daviddarwich5 ай бұрын
Thank you for your great explanation
@blndrckr6 ай бұрын
Thx dude
@jzausatv29536 ай бұрын
Easy to do that, but that plug in or application is so, expensive
@SilverSun2166 ай бұрын
Awesome!
@trungtamphattrienthuonghieu6 ай бұрын
how install esko Automation Engine?
@FrancisJFox6 ай бұрын
Why does it fail? & will replacing it fox the problem?
@nguyenloi52417 ай бұрын
give me link download softwave, thanks so much
@debnathmriganka20107 ай бұрын
I am followed your channel basically learn esko. But Can you help me one thing i am facing a issue for studio for illustrator regarding finishing material. I want to emboss any text with any color. when i am using emboss then color cant be putted over the emboss. can you guide me a simple souation for this purpose. Thank you.
@debnathmriganka20108 ай бұрын
Hi, sir can you help me to learn esko specially for imposition or ganging, using Tilla Phoenix or esko plato. Please.
@lennycuellar8 ай бұрын
First time ArtiosCAD user at a little start up and this has come in handy several time. Thank you! 👍