@jnairac Thank you.

I have been using mine with a 4 amp Hour Battery. I have set it for the 6hr time and when I have woke up it is off but has battery power left over. I am assuming it ran for 6hrs But I have not timed it.

@gonzalez7805 Can you be a bit more specific?

Same process just use silicone baking sheets ...

Interesting....

@calme_ Glad I can stand out even if its only by a little bit. Thanks for the comment and views.

@tylerbarnhoornproductions7506 No I have not. I don't own or have ever used a 3D printer. So I would not even know where to start. If you or anyone else would like to give it a try go for it. If someone makes it and it works please let me know would do a video about it.

@@ronphillips6336 china. Thanks for asking. Seems when I say where an item is made I get people asking why I throw that in there. So I made several videos where I left out country of manufacture. You are the first to ask.

@@charlesartificer2158 Well many thanks for your reply. I thought the box said made in China. I tossed it, later discovered a faulty flame adjustment. Contacted Primus with a short video and post hast they sent me a replacement. Awesome customer service. Replacement works fine. Another question if I can. Should the flame go out of you press the adjustment knob in without turning?

@@ronphillips6336 now that's something I don't know offhand. Tomorrow when I get up I will pull mine out light it up and see if I get a similar action from mine. My gut instinct though is no but without testing mine I'm not 100% sure. Thanks for hitting me up with a very interesting question, but I think I'm going to roll over and try to get some sleep now it's getting late here. Have a good night and be safe.

@ronphillips6336 Ok I tested my Primus stove and it indeed goes out when you Press in on the knob. I then got out my camping moon XD 2 and tried the same thing. No change in flame. I tried out several other iso butane stoves and had the same result. Only the Primus goes out or has a flame change when the knob is pressed. So I am guessing the valve is designed different than any other stove I own. I am not an engineer but I find this very odd and a bit distressing. I noticed that this quirk makes it harder to adjust the flame, as you may press inward on the valve without realizing it. then when you pull your hand away the flame intensity changes slightly. Thanks for bringing this to my attention. May have to do a follow up video.

lol ok. Thanks for the comment and views.

Indeed. I love Ollies Outlet.

Sounds like a defective one. Take it back and find a better one online.

You will be impressed. For the money its very high quality.

The moras are ok but I think to many people hype them up. Thanks for the comment and views.

@@stevew585 glad my video helped you out! 😃

My first 10-hour test resulted in 96.1° before closing the lid, and overnight (10 hours) it became 78.1°. In Fahrenheit: from 204.5° down to 172.6°. Cup was slightly warm to the touch, but not anyhow hot.

@volchonokilliR There is a discount store chain here in Michigan called Ollies Outlet. They buy overruns of name brand products and sell them at a discount. Over the years I have some sweet deals there.

Interesting results on your test.

@@charlesartificer2158 that is really cool. Don't think there are such stores in my country, that would be a super bargain

@@volchonokilliR what country are you in?

@@outdoorelement already done. I'm liking the biner alot. Thanks for stopping by, have a great night

One would think so. I did measure the ones that came with it. They come out to 1.95mm The flint that came out of the disposable lighter came out to 2.08mm and it just fit. The zippo flint was 2.20mm and was to big. So 2mm is the size. But everywhere I look they are 2.20 to 2.25mm in size. So if you or anyone out there finds a source for 2mm flints let us know.

@@temprmj1 well I'm glad it helped you out. Thanks for the comment and Views have a great day

My review is not incentivized. I have never received a free product or money to do a review from anyone. I am just a guy who likes going out in the woods and do some KZbin videos. This charger like many things electronic is made in china cheaply as possible. So buying things like this is a risk. I still use this one and the smaller version. They work fine for me. I have not had problems like others. Sorry to hear you like others got a defective one.

@@charlesartificer2158 oh i wasn't pointing fingers at you. And I hoped yours actually worked. but the Wallmart reviews on the website in general are paid reviews.

Ahh Ok. Well maybe you can find a better one on amazon. I read a lot of reviews and watch a lot of videos before I purchase things. But with 95% of products made in china I always worry I will get a lemon. When I was a kid My teacher in electronics told my class a story. When He was a young man all the trash electronics came from Japan. Now all the trash comes from china. You see in his time it was after WWII and to rebuild Japan's economy the USA helped the Japanese Government to get their industry back up and running. All the stuff they made was for the US and Europe market. Cheap transistor radios and such. Fast forward to today some of the best electronics in the world come from Japan and all the cheap copy's are made in china. Now I'm not saying everything from china sucks. I have been surprised a few times. But I am saying a lot of it is made as cheaply and as fast as possible. Plus the quality control sucks at best. Sorry for the rant lol. Been a very long crazy day. Have a great night and good luck.

First time I have read someone describing the texture as rusty. I have the tomshoo 750ml version of this as well and they feel the same to me. there is a texture there but its not horrible to me. I hope this answers your question.

Nice.

Thank you very much!

Thanks for the comment and views.

Mine has a rivet no screw. So it would not be easy to tighten it.

@@charlesartificer2158 I didn't know it's called, I guess it's a rivet, lol. I can't tighten that at all?

Not easily. Rivets like this are compressed. They are usually 2 parts. one side is solid round stock. the other is hollow like a pipe. They press together and they usually will go no further if they are fully seated. You could try resting one side on an anvil or large piece of metal, free-weights ect. Then with a hammer lightly tap the other side to see if it tightens up at all. Please remove the glass from the lid first so you don't break it. If it wont move at all then the only option left is to grind one side off so you can remove it and fashion a replacement and put it in. without knowing your skill level this last option may be out of the question for you. Sorry I don't have better advice. have a great night.

Also If you have access to a vice you could put both ends of the rivet in the jaws of a vice and slowly close it and see if that tightens it up. Sorry Its late here and I'm half asleep. Have a great night Hoppe things work out for you.

I understand, to each there own. Have a great night.

Maybe I did have onions. Hard to say haven't had heartburn in a long time. Ya that woodstove is Nice. Looking to use it alot this fall. Have a great night!

@choossuck7653 Yes, he was. I have all three films and watch them about every 6 month or so. Thats why finding this book was such a treat.

@@charlesartificer2158 right on brother. Have a great week

@choossuck7653 Yikes, Man that is bad. Well get this stuff and wash when you come home. It helps a lot. Plus if you do have an outbreak. washing the area with it will shorten the healing time and take the itch out.

Yes sounds line a winner to me! Have a great night!

I didn't see the corn muffins, will look next time thanks for the heads up! Have a great night!

Its weird how some locations get the stuff before others. Haven't had the meatballs yet, will look into it when I can. Would like to try the Food life balanced stuff, sounds interesting. Haven't seen the Black rice, will keep an eye out for it. Thanks for sharing. Have a great night!

Yes sir! Cream or Sugar?

Its a high end gun oil called strike hold. But any specific oil for knives or firearms would work just fine. Hows the weather over there M8?

@@charlesartificer2158 Hi Charles, Thanks for the oil info. The weather in London right now is weird..lol .. unpredictable.. boiling hot then a rain storm, then very sticky and humid. I'm used to this crazy weather, lived in London all my life.

LOL sounds like Michigan. My dad used to say Michigan weather changes its mind often and unpredictably.

I just received this knife Charles and have the exact same issue as your video!

@@stevew585 lol well its a good thing I am honest in my videos and you can see what to do.

No problem 👍 Thanks for watching.

Mine gets hot but not very hot. So I would wonder. How's it do long term keeping the contents hot?

I think I can Visualize what you are describing in reference to your mods. Best carrier I found for this set without spending a fortune is the GI carrier. When I was growing up Many people around here called metric commie or Japanese. This being Michigan in the 70-80's many people here hated Japanese cars. Tools then were either SAE, English or commie lol. So all these years later I still slip up when it comes to metric measurements. thanks for the stroll down memory lane, have a great night.

I wish I could answer this. But it is just as much a mystery to me as you.

Agreed on the Chimney. Thats one of the reasons I like the winnerwell over others. Watched a guy slice the hell out of his hand with a roll up one. Ice fishing shack would be great for this. It can use all the winnerwell large accessories like the Water tank. Thanks for the comment and view. PS Its hot here in Michigan as well lol.

Unfortunately the tape I used to use is no longer made. I have tried a few of the chinese made versions but they have been subpar at best. So I have moved on to using my homemade seam sealer. So far several years in it is holding up well. It is cheap to make but it is messy and takes some time to apply. I made a video on it here. kzbin.info/www/bejne/o32sl6psiq-coqc I hope this helps you out. have a great night.

NICE! Legacy tools like that are the best! I have been trolling flea markets and second hand shops here looking for an original without paying an arm and leg. Unfortunately no luck so far. have a great day.

Depends, if you can get it cheap then yes. But there are smaller headlamps out there that are of a better value if you're looking for size and weight. But if you don't mind the extra weight and size and you want a good long run time then this isn't bad but only if you can get it cheap. I wouldn't pay full price for it.

@charlesartificer2158 ok thanks man. $30 is the price here in town

Hmmm that's a bit much. What is it you are primarily going to use it for?

@@charlesartificer2158 security around our perimeter. Scanning the property , etc.

Well in that case it should work well, it has a great throw range. 18650 battery's are easy to get so having a few sets for quick change. Good luck my friend.

Nice, thanks for sharing.

Yes!

Glad you enjoyed it

Yes. I have an older video on the burdock no char tinder. Got all the info from them. They are great,

@charlesartificer2158 yup they're relentless and passionate about their craft !

Indeed I hope they publish a book someday on their bushcraft. I'm sure the chapter on fire tinder's alone would be worth it.

@@charlesartificer2158 They are some of the best experts on Flint and Steel. I'd buy it.

That sucks. I have used mine many times with no issue at all.

Never had one get stuck yet. Thanks for the comment and views.

Thanks for sharing. I am thinking for use with my Frying pan.

Coffee is life! and Carl G don't care. Thanks for the comment and views.

Thanks for watching!