Thank You Very Much. 09.09.2024 STEINBERG Chat was useless. THANKS AGAIN!!!
@GokhanBekenАй бұрын
Thank you
@yukeemusicАй бұрын
so helpful thanks <3
@Robertpazmusic2 ай бұрын
Thanks 👍👍
@ieatnoodls2 ай бұрын
Legend
@ilmondodifaxe82163 ай бұрын
For me the biggest problem is the lack of the step sequencer
@littleone51263 ай бұрын
There must be third party VSTs out there that can do that I guess. I didn't miss the step sequencer tbh, i rarely used it. Maybe FL was the wrong choice at the beginning 😔
@meziahdanieljolley88423 ай бұрын
If you people take apart your soundcard like this guy did, I won't be surprised if you break it. Amateurs should not be doing this kind of work. Leave it to a professional.
@littleone51263 ай бұрын
Yo I'm the guy, You won't break anything unless you scratch the electronic board with your screwdriver on purpose. I'm an amateur myself and successfully fixed my audio interface with no help without damaging anything. My gear was out of the legal guaranty anyway and i would anyway never have the patience to send the gear abroad and wait for the brand to return it fixed for a simple issue like this 😂 That being said, i wrote a disclaimer at the beginning of the video, so people do w/e they want, they are aware
@MaNuLaToROfficial3 ай бұрын
they sell electronic contact cleaner everywhere but i think starting fluid is similar or if you have like O2 (oxygen sensor) cleaner spray in a can that will work too or maybe rubbing alcohol? also known as isopropyl alcohol? if you go this route make sure to get the highest ratio of alcohol and least amount of water. because at the dollar store for instance they sell like 80% alcohol with 20% water so its super diluted and of course water is something you dont want on or in your electronics and hardware. also there's a cleaner spray in a can called Deoxit i believe thats pretty expensive BUT is made JUST for pitch pots! and i believe deoxite brand also make and sell a lubricant spray that you should use to lube the moving parts after cleaning them because the spray cleaner will remove a lot if not all of the lube thats inside the pots. anyways hope this helps! also WD40 isnt always the best option either because im pretty sure its a well known fact that in long run it can actually attract dirt and other debris and make that crap stick to your equipment. I've also been told to NEVER use WD40 in car door tumblers (where you put the key in to unlock car doors) to clean or free up sticky tumblers because again it will attract more unwanted contaminants in the LONG run !!! ok that is all
@mallem17554 ай бұрын
THANK YOU! GOD DAMN!
@Kenlaboss.4 ай бұрын
Not sure if it's recommended, but Turning the knobs back and fort will eventually fix it entirely for me, until it comes back after a short while. As this is probably accumulated dirt, one could try to cover up the interface when not in use, to prevent it for longer. My interface is always in use, so I haven't been able to try it myself though.
@sc63775 ай бұрын
What name pluck you use in for this
@idolfangirl6 ай бұрын
would it be okay to cover over this with new luka vocals?
@littleone51266 ай бұрын
Yo, no problem. At least if you credit me, everything is fine ☺️
@paulhb6 ай бұрын
All videos should be this to the point!!!!!
@meruseachi19276 ай бұрын
This is honestly sooo well done really keep it up because it sounds awesome
@avepavel27656 ай бұрын
thank you for this video - it helped me. I used wd-40, sprayed it inside the volume knob, turned it few times and it helped me to turn it without any noise. Actually, I had not only a noise, but sometimes my right channel was off while I turn volume knob. So now it works without noise and without sound dissappearing. Thank you a lot
@BankruptGreek4 ай бұрын
Can't believe that worked, thanks. I gave it 2 tiny spraying and turned it a bunch and that was enough for my knob
@smolmaae79476 ай бұрын
anata ga umareta koto ni tsuite boku wa iu gisei to koukai nakigoe ni kakikesareteru no? tooku naru kokoro e to hakisuteta katachi wa nai kotae wa nai boku wa shitta koccha nai sensai na kinuito ni kuroi shizuku ochiru nakigao ni tsukitsuketa hiniku to yasashisa ga tada koboreochita koko ni atta soujitsukan anata ga eranda sekai ni tsuite boku wa iu kurakute kasunda me no mae no keshiki wa dou mieru? kaeritai sore dake wa yurusarenai kotoba kara afuredeta itsuwari no shiawase nakidashita koufukukan akaku somaru namida konagona ni kudakareru kata ga mada utsukushii tada motomeatta soko ni atta soujiitsukan boku wa naita nakitsukareta nanika kieta katachi wa nai kotae wa nai boku wa shitta koccha nai sensai na kinuito ni kuroi shizuku ochiru nakigao ni tsukitsuketa hiniku to yasashisa ga tada koboreochita koko ni atta soujitsukan
@enderground95427 ай бұрын
its so beautiful
@V4_NT8 ай бұрын
beautiful, can you put a download link, please
@littleone51268 ай бұрын
thx ! honestly i don't think i still have either the project or the rendered WAV file. But you could just yt to mp3 the video, it should be fine ^^
@V4_NT8 ай бұрын
@@littleone5126 okay, thank you very much
@akiekholm34088 ай бұрын
Thank you for making this video. As a last resort before buying gen 3 or gen 4, I found your video and this information fixed the problem. Thank you again sir! All the best for you.
@phuturemusic9 ай бұрын
Thanks, dude!
@arnustudio80439 ай бұрын
Thanks ❤️
@gonzomuller88469 ай бұрын
Yes yes yes... you´ve made my day....thanks 😉
@rikhrossh559310 ай бұрын
Thank you🙂
@somiaputra226710 ай бұрын
This is close to yuyoyupoe's original but it sound more clear.i prefer your version. Good job and thanks for this
@Bhargxv3311 ай бұрын
Hi I have similar parts but I’m worried abt my psu, I use Ryzen 5 7600 and an RX 6700XT . IS 650W ENOUGH for this combo?
@littleone512611 ай бұрын
I used the pcpartpicker site to simulate my build, it's very useful, it warns you if there are any incompatibilities and gives you an estimate of the power in watts, it was 420W for my build. I opted for 750W just to have a safety margin for any future upgrades, and as I have a gold PSU, it won't waste too much electricity (from what I understand, bronze, silver, gold etc just indicates how much electricity the PSU will waste if you don't use the maximum power). But bear in mind that you should be most concerned if you have a power-hungry GPU as that's what's going to consume the most power, for reference here are the 3 components in my build that consume the most: GPU 6700XT (57W - 230W), MSI B650 Motherboard (17W - 70W) and Ryzen 5 7600 CPU (8W - 65W). They account for 87% of power usage. "Fun" fact : the RTX 4090 can consume up to 450W.
@Bhargxv3311 ай бұрын
@@littleone5126 Thanks for the reply buddy! Appreciate it 👍
@ChristianBonomo-h6p11 ай бұрын
How do I actually add a sound to the piano roll feature in cubase? I've got a cowbell sample I want to use with the piano roll feature and cannot figure it out.
@littleone512611 ай бұрын
You need to use the sampler. You can use a shortcut, if you use the file browser in Cubase you can right click on the sound and choose sampler, that will load a new track with your sound in the sampler. Otherwise just create a new instrument track with a sampler and load in the sound (maybe you can drag and drop). Once you have he sampler ready you can use the piano roll like with any synth VST ;)
@meltisdead11 ай бұрын
КРУТО!
@peta463511 ай бұрын
I LOVE YOU LITTLE ONE. I TOO BUILDT MY FIRST PC LAST WEEK. WHAT A HEADACHE ESP THE CONNECTIO FOR THE PWR LED ECT.. AND KNOWING WHAT CABLES GO WHERE.. WHAT WAS THE HARDEST FOR YOU?
@rickyturner8974 Жыл бұрын
🔥 "promo sm"
@honeyplant13 Жыл бұрын
Dude, you're a life saver. Thank you for making this video!
@TyronWoodsLive Жыл бұрын
Exactly what i was looking for
@NQHarry Жыл бұрын
Did you copy this build from anywhere ?? About to build my first PC and Im thinking of copying a KZbin PC Build
@littleone5126 Жыл бұрын
Nope, I just checked what recent "in my budget" components were available on the market while checking inter-compatibility and that's all. You can copy mine if you intend to make music (that was the main purpose for my case) but feel free to adapt the components if you wanna use it for different tasks :)
@aborburgh6463 Жыл бұрын
why not went for expo certified memory ??
@Risus_Sardonicus Жыл бұрын
Brotha, I'm guessing the algorithm sent me here. I'm wanting to start a basic build myself, not at all a PC Gamer but the components and stuff got me in a phase where I'm going to attempt it. Any advice?
@littleone5126 Жыл бұрын
Well I am by no mean a tech expert. What I can say is if you don't plan to play games with it you can choose a cheat GPU, on gamer pc the GPU is what will highly influence the final price even tho the GPU market got cheaper after corona time. The GPU I got is already considered gaming GPU i would say so you could even get a cheaper one. Other than that it's mainly checking benchmark and videos to learn and compare. Also pcpartpicker is a great website to simulate a build while getting warning compatibility.
@JaKL1999 Жыл бұрын
glad that youtube has recommended this amazing pc build video from the homepage 👍👍
@mariodroid7 Жыл бұрын
bro, all components are black except the GPU, why didn't you get an xfx 6700 xt? they're all black.
@Ladioz Жыл бұрын
Very good choice of components. Enjoy your pc!
@kotnim6419 Жыл бұрын
Nice
@selcukkolunsag5304 Жыл бұрын
Why not noctua fans & cpu cooler ?
@Nick-wr3qz Жыл бұрын
I bought my setup two days ago, still waiting for the arrival. I'm actual surprised how similar our builds are!
@littleone5126 Жыл бұрын
Built mine for music production so i mainly focused on lots of RAM and fast single core CPU (cause music softwares mainly process in serial, not in parallel)
@fiqrinovianto5646 Жыл бұрын
It's a good thing that you put the Mobo safe but you can put the Mobo on the top of the box of the Mobo or something that doesn't have hard surface so the bottom part of the Mobo didn't scratch or get damaged
@peta463511 ай бұрын
NAH. I USED MY MOUSE/KEYBORD PAD.. THE BOX ISNT IMPORTANT REALLY. I LOVE YOU
@fiqrinovianto564611 ай бұрын
well at least not a hard or metal thing
@hologramdx7574 Жыл бұрын
im curently saving towards my pc im so happy for you tbh congrats man
@Bck2TheMnu Жыл бұрын
Hey dude that stock prism cooler isnt going to cut it man get yourself a deep cool ak 620 for 40 bucks
@littleone5126 Жыл бұрын
Wdym stock cooler, i didn't put the stock cpu cooler 👍
@Bck2TheMnu Жыл бұрын
@@littleone5126 that my bad
@Lanceval Жыл бұрын
Always nice to see a new member of the PC community assemble their first build and watch it come to life. Congrats on the build! It looks amazing!
@colin.snyder1256 Жыл бұрын
This is a very nice video and I like this sort of content Keep It Up! You've Earned my Sub
@colin.snyder1256 Жыл бұрын
The Only thing is that if you had the budget, that CPU runs toasty you might want a stronger cooler in the future depending on how hard you use the computer
@littleone5126 Жыл бұрын
@@colin.snyder1256 i read that the X version of 7600 was the toasty one as X is for overclocked CPU but i'll eventually see on the long run. So far i'm around 50°C average.
@colin.snyder1256 Жыл бұрын
Okay Nice@@littleone5126
@DarkSoul8800 Жыл бұрын
I'd say for a first build it was nicely done. I know it can feel daunting building your first PC trust me I was freaking out that I was going to break something back in 2015 lol. But you have done well. Wires looked clean from what I saw. I usually try to untangle and cable tie them to the case it is a pain sometimes depending on what case you're working with but yeah. Good job!
@littleone5126 Жыл бұрын
Thx ! I wasn't necessarily confident at first, but I watched a lot of tutorials and in the end it went well. I think that today's components are made easy to assemble.
@playdayxo3037 Жыл бұрын
i will be building my first gaming pc in a few weeks. i can't wait to be honest. you really did a good job, have fun with it! ^^
@peta463511 ай бұрын
DONT FORGET TO UPDATE YOUR O.S AND DRIVERS AND SET YOUR RESOLOTION AND REFRESH RATES.. I LOVE YOU? WHATS YOUR CPU/GPU COMBO?
@gabbe5130 Жыл бұрын
THANK YOU
@TR-707 Жыл бұрын
i think its time for me to just replace the filters completely after many years on the road