Marc Reiter

Пікірлер

@jimmoravec1326 Ай бұрын

That’s the way to do it the right way. You can simply reset your cluster but that usually doesn’t work and doesn’t solve the problem to begin with. Do it right or don’t do it at all, good video 👍

@CodyPatt1 3 ай бұрын

Followed your directions to a T and low and behold, my 06 3500 is showing RPMs again. You the man!!

@ripmanridin7092 7 ай бұрын

Awesome Marc!!!

@travcarrie 7 ай бұрын

Congrats on your first freeflight!

@ThEMarD 7 ай бұрын

Just an addendum, I performed this repair and it fixed the tach for me as well... But I seem to have tripped the security module lol as my truck wouldn't run for longer than 5 seconds and the remote unlock/lock stopped working too. I had to disconnect the negative terminals on my battery for 20 minutes and then everything worked again

@GlenHarmer 11 ай бұрын

Great video, thanks!!!

@wayne-dh4pt Жыл бұрын

thanks will do the same

@jakekinsman7739 Жыл бұрын

Could this also be a reason my Speedo, oil pressure, and temp gauge aren’t working? Same chip? Or different chip?

@gr6e Жыл бұрын

Every time I watch this movie, or a clip from it, I catch something I haven't seen before. Is that poster on the wall a warning that the train will take you to the museum?

@juanmaldonado3281 Жыл бұрын

WAW. SUPER. AWESOME. NOW. I WILL FIX MINE. BLESSED BE SIR

@hotdogmanful Жыл бұрын

18 screws dude...wtf

@CompoundP Жыл бұрын

Just bought an 06 2500, it’s idling at 100rpm, cruising at 60mph it shows just under 2k rpm, and cruising at 70mph it shoots well past the redline

@blh3741 Жыл бұрын

yep....you need to do the fix! Identical to mine. I needed to fix it before I sell. New Maverick was delivered!!!!

@explorewithjosh Жыл бұрын

RAM tachometer issue solved after following your instructions. Thanks so much!!

@Shindai Жыл бұрын

my god, that's so stupid/brilliant xD

@failingdisciple938 Жыл бұрын

Great job on this vid. Just did mine and worked great! Thank you 👊

@erikp1308 2 жыл бұрын

Worked great! Thank you for making this video.

@jrjones437 2 жыл бұрын

Great video

@Omgl0lwtf 2 жыл бұрын

Another fixed tach thanks to you! Instructions were very clear, thank you

@avilesautoparts 2 жыл бұрын

Thanks you my tachometer is working now

@kevanoregan6216 2 жыл бұрын

Thank you , I helped helped a friend fix his. Re-soldered the 2 ICs, ( Some of them were not well soldered to begin with. Thanks again.

@OhioJimbo 2 жыл бұрын

Marc, I reviewed the Bronco Sport, (GoPro360) but have ordered my full sized 2022 Bronco. Are there groups locally (Ohio) that are solid Bronco fans? kzbin.info/www/bejne/nWG8qphtaMh-odk

@OhioJimbo 2 жыл бұрын

How do I get involved in a Bronco Roundup?!

@brettammons7091 2 жыл бұрын

Just did this fix last night, and tested it at lunch today and it worked! Now waiting on replacement lamps for the backlights to get them all working. THANKS! I would note that the trim around the radio/hvac controls on my 2006 1500 SLT MegaCab truck have two screws through the bottom. Either my mechanic broke them the last time he got into dash or I did pulling it of. Not a big deal though. Should have read the Haynes manual.

@brianbessey7914 2 жыл бұрын

This is a great video. The hardest part is getting to the tac. I followed Marc’s instructions and was able to re flow the solder no problem. I suggest using a small tip for the solder iron and be careful like he suggests. Good video Marc.. You should give a class on how to make a informative You Tube video…

@ioanardelean1936 2 жыл бұрын

Hello awesome I did it and it worked well perfect, wonderful. Works like new.

@tomcisneros5965 2 жыл бұрын

How bout that, it worked. Thanx for the help.

@tacosplease4906 2 жыл бұрын

Do you have any pics of the chips solder joints before the fix?

@fbenross 2 жыл бұрын

Worked like a charm-Thanks

@bmwdud 2 жыл бұрын

thanks marc , i watched your video and fixed my 06 1500 ram tach just like you said , great job on explaining :)

@mk2supra84 2 жыл бұрын

Just did this on my 06’ 1500. Followed the video exactly and the tach works again. Thank you!!

@nimrodceballos6687 2 жыл бұрын

JBL logo on the front different color.

@dacianavanprice 2 жыл бұрын

The 4 people who disliked this are serial killers.

@danw.1878 3 жыл бұрын

Fixed my ol 5.9 thanks for the help

@michaelcroteau6665 3 жыл бұрын

Thank you, Thank you my 06 was having this problem at idle the tach read 0 RPM . Followed your video now my tach works like it should. you saved me a bunch of $$$$$ Thanks again

@jitterbugvan 3 жыл бұрын

Damn been 2 years with a funky tach..fixed it in 30 mins..it was so easy I did it while I was higher than giraffe snatch...that's how easy it is

@willjohnson2449 3 жыл бұрын

7 years later and you just saved me some money! I greatly appreciate the detail you put into it. Thanks!!!

@apollocreed2089 3 жыл бұрын

Anybody know know how to recalibrate the gauge once it’s working correctly?

@teledunc 3 жыл бұрын

Awesome!! Just did this on my 6spd 2006 mega cab, everything went just as you showed and now I finally have a working tach for the first time!

@hessiejames4896 3 жыл бұрын

Awesome vid. Thanks a lot. Worked for me. Done in one hour. The only thing to mention is that there's two screws on the bottom of the radio bezel. Be sure to remove these or you'll break the tabs of

@SkylineTTurbo 3 жыл бұрын

I always come back to watch this scene every now and then, it's just too damn funny.

@MichaelLewis-dj2sl 3 жыл бұрын

Didn't help me, looks like previous owner may of try repair as well since half the bolts were missing. I wonder if that's part of the problem?

@mab4870 3 жыл бұрын

Great video brother. Thank you and well done

@ixdjxl1 3 жыл бұрын

Works for me. Thank you so much!

@JeffinTD 3 жыл бұрын

Great job! A lot of folks don’t cover shimming the mount holes. That slight flex of the pcb, plus vibration and hot/cold cycles is likely what caused the original solder to let go.

@joesweeny3928 3 жыл бұрын

Seven years since posting and it’s still helping out others.

@MrBoyRc 3 жыл бұрын

This was so helpful thank you sir

@scorpionx1503 3 жыл бұрын

🤣🤣🤣

@johnhuntington3800 3 жыл бұрын

Here is a much better, quicker fix - insert a bent piece of safety wire through the trip reset hole, and turn the tachometer needle counterclockwise until it rests on the correct side of the needle stop. No screw removal, no solder headaches, did mine in less than 30 seconds - now my tach works perfectly.

@ChrisfromGeorgia 3 жыл бұрын

This weekend I'm going to take your suggestion to fix my tach using your method. Currently the needle on my tach is all the way around the bottom below the stopper at 0 rpm. This happened when I reset my instrument cluster when my tach was resting at 0 rpm. How it made it's way all the way around, I have no clue. At this time, my truck seems to be shifting fine. It's crazy because the tach will sometimes go backwards for a moment when it shifts into overdrive. Thank you for the advice!👍

@danielkonik8415 3 жыл бұрын

Is there anyone in VA that would be willing to help me fix this issue on my 2004.5? I don't think I could do this myself lol.. I would pay of course.

@jason-oh6qr 3 жыл бұрын

I think I read on a forum that the tach problem makes the brake and abs light come on. Can anybody verify this? Great video thank you.

Ең жақсы KZbin

Пікірлер