It's been two years, how is it holding up now... 🤔🤔

It seems similar to an accummulator. If so the amount of water prior to pressurization of bladder determines the amount of water dispensed at rated pressure before it tapers of to a lower pressure through all those in line filters. If tank is pressurized prior to this, minimal amount of fills the accumulator and this amount only can be dispensed at rated pressure. In other words if tank has to deliver 2 litres at regulated pressure it implies fill the tank with 2 litres before pressurize to tank ratings. Here have assumed inside the is a floating balloon bladder connected to valve. Remaining space contains the water buffer. Point is can achieve rated pressure with bladder totally filling up the space inside tank OR half the tank volume taken up. In the latter case half the of water is now available at faucet for dispensation at pressure.

Thanks a bunch! Saved me a ton of money. So easy.

you said you could remove the focus box before hitting record i have been trying to get mine off but can not find anything to take it off

how to remove focal point...and other info like recording...

I don’t know you and you don’t know me. But I want to thank you with all my heart! You’re a savior man.

Really usefull

What did you use to get the air into th tank?

Not sure why you didn't replace diode first then test to see if working...diodes are cheap and the most common part to fail from what I've read. But you replaced both at same time so everyone watching this have no idea which part was bad. Interesting video anyway to see the insides of the MW.

Hello I want to take a moment and thank you so much, ever so much. My little boy had the fortnight Nintendo switch about 3 or so years ago and it got broken I haven't been able to fix it keep putting it on the back burner on my list of things to do. At one point I bought him another one and it quit working it just doesn't charge anymore anything and he barely even had a chance to use that it fell out of warranty so I honestly don't know what's wrong with it I do believe possibly he may have put the wrong charger on it I don't know it looks fine inside but again I don't know After watching this video a few times I finally went ahead and fixed it by using the old parts from the newer one With your help on this video I was able to do it and make a little boy very happy once again I am in my 50s and I had a hard time seeing these little tiny screws and so forth as old age creeps up on me However my 9-year-old son who got this when he was about five or six is now once again happy he has been distracted with other things but has always stayed on me about it With working a demanding job full-time and trying to fix 100-year-old home that we live in with constant issues I finally finally got a chance to sit down and fix it for him tonight here September 21st 2024 after all these years and I feel so bad but the hug I got was so wonderful it was priceless Thank you so much

I too have found some of the issues with Gopro and gamechanger keeping a consistent stream. Sometimes choppy, sometimes is stops and ive got to restart the stream. I have a mobile hotspot onsite and just connect my 3 devices to my hotspot. Ipad, iphone, go pro. Iphone for the stream and Ipad to score the GC game. What im getting at is the mevo the same setup and worth the buy? Looks like the same process but reason I am looking at the mevo is the stream/quality and a better zoom than Gopro 10. oh and not shutting off. Battery life for mevo? Can we zoom in the mevo? Sorry for the long winded questions. Great video BTW, I like the tutorial with the iphone on the screen.

I have this thermostat, can I set it so that if the temperature gets to a certain temperature the heat comes on and if it gets to a certain temperature the air comes on? I currently have to manually switch from heat to cool..

Omg thank you soooo much. I was getting so upset trying to figure out what's wrong with my camera. Truly thank you

Dude!! Almost returned it. Thank you!! It worked. Subscribing. You’re my hero lol

Jackson Kimberly Anderson Angela Hall David

Anderson Mark Gonzalez Laura Lee Jose

Moore Gary Brown Helen Taylor Jose

How do these tanks loose pressure?

Can I just replace the diode and if it works and fixes the issue. Not install megatron. What donyou think?

Moore Daniel Jones Robert Walker Paul

Is the mevo that much better than just using the iPhone camera? Was hoping if I used a mevo camera I could stream and run GC with my iPad but based on your video that won’t work.

Anderson Lisa Lewis Deborah Davis Angela

Please don’t be me forever f

Say to me

What if your chimney is to long?

Mine doesnt have the ribbon

Thank you so much!!! I couldn't figure it out. You da man!

Oh my god that was painful to watch. Bruh is that really how you’ve been installing “many many times?” Dang bro 😬 You’ve inspired me to make a video for people to learn the right way, the pain free and rational way, the carpenter way. There’s a lot wrong here but I’ll just mention a couple things: use a damn speed square for cutting planks to length! That’s a no brainier. And mix up the lengths so you don’t have your joints all line up like that, it looks terrible. And when you get to the end of a run, take the last plank and spin it around, put the factory end (the end which will snap into the end of the run) and set it against the wall, back like a quarter inch (or 1/8 in it doesn’t have to be exact 🥸 the trim hides the cut ends dude) then mark the plank where it overlaps the end of the last piece you installed. Now spin it back around, cut it and install. Then use the cut off portion, if it’s at least eight inches long, for the starter off your next row. Dude no wonder you have so much wasted “scrap” material. You should only have maybe 5 percent scrap, if that!

Jones Donna Miller Jose Miller Jennifer

All other installs of thie Palisade tile show silicone being put on all the tongue and grooves of each tile that is joined to another; for better water-proofing.

Davis Scott Thomas Jose Wilson William

Thank you! I was about to go crazy!

Gonzalez Betty Walker Gary Gonzalez Elizabeth

The link to the parts totals 44 dollars, where did the 350 came from? Dud the price dropped since thus video came out?

Thank you!!!! Will give this a try.

Did it and it solved the problem, thanks!!

The way you are using 2 patterns is actually wrong. The instructions specifically say not to stair step that way. You should take the piece that you cut off and use that as the first piece on the next row. If it too small you can cut a random length, but your end result of this pattern actually decreases the integrity of the floor (according to the instructions). This video is a year old, so I am curious how it has held up?

Worked for me! I had the calcium build up in the heater core as well as gummed up sensor on the coffee basket. Totally worth the time!!

Hell yeah man!!! Thank you. Was messing with the on off but didn’t see the reset button

Thank you that was exactly what was wrong with it. 😊

Perez Carol Hernandez Shirley Gonzalez Scott

Young Jose Martin Brian Clark Mark

Do we really need that tank ?

My switch is completely destroyed because my mom slammed it on the floor and I am so 😡

I really love the battery operated aspect of it which is why I decided to switch from the Nest to the Sensi ST55, but the Wi-Fi keeps dropping off despite that it was never a problem with my Nest and the router is only a few feet away. I’ve had to reconnect it at least twice a day in the last two days since I installed this thermostat. Furthermore, the app does not sometimes reflect what is actually going on at the thermostat itself, for example, it may be cooling, but the app looks like the thermostat is not doing anything and on standby. I hope Sensi somehow improves / updates this and I’d be all set.

omg, I've been struggling. Do you know what to do if it's a model without wifi connectivity? my hdmi cable is not detecting the camera. It's canon rebel T1i.

thank you bro

Thank you for solving my problem. 🖤

Awesome! So did you put the amount of pressure necessary before allowing the tank to refill? Just wanted to make sure before I do the same.

Im gonna do ALL of these steps tonight! THANK YOU FOR THIS!!!