Came here to fix the seats in my excursion, left with a crash course in basic electric and fixed my seats! Great video, dude!

I don’t want to buy the special fan clutch tool. I was wondering if this would work. Thank you! The ole hammer powered impact!

Very good video. Helped me tonight. Thank you.

Thank you very much May God bless you brother Que Viva Cristo Rey

Either they didn’t like you or they were unprofessional. Both cases are unacceptable. In business, communication is everything. We just took delivery on the 8362 and we got ours in Ohio from Country Stove and Patio. They’ve been exceptional to deal with. Although our bypass thermos, and handle plates were worn (from the factory), and our bypass handle rod was bent to sh%#, Country Stove and Patio honored a replacement immediately right off their showroom floor so there was no wait time. They gave me semi brand new parts that were damage free from the showroom and they’ll take time to hash out warranty claims on their end. It was a great experience so far. Haven’t had a chance to fire this thing up yet, waiting for really dry wood to be delivered.

Thanks!

Would the plated steel version be suitable for mainly waterborme finishes? Or would that require the stainless steel model?

Thank you! I just bought one and I haven’t use it. I’m going to return it. I need an easier one. I’m a female looking for one that is easier to put aside.

Stop burning paper and cardboard

I'm using this printer for already more than five years... it keeps on working just fine.

Hello did you figure out the problem I'm dealing with this now I know it's been years since u posted but I need help

Lobby 6 the 122 and 35p0 have the programmable timer.. Who would have

This is how all Vitamix blenders should be babe l made . Has the features you actually do need. E.g programmable timer and manual controller.... We don't need presets...... It's too help sell blenders to "blender tech nerds

Reason is dead two batteries too this one too extra jump start

Thanks could have saved money for that fan clutch wrench set oh well got em now but thanks for the vid

2 batteries 🔋 extra battery pack

I have the Epson 4530, similar to this one. Had it 10 years with no issues until I stopped using it for months. Black works great still but the colors are not all there. Thanks for this video, hopefully I can get the nozzles unclogged.

Excellent information thank you?

Hey man! I know this video is almost twelve years old now (half my age 😂) but you seriously saved my ass, I was sittin here trying to figure out how the hell to do this then I saw you do it with nothin but a socket extension and a crescent wrench and I thought damn, maybe this won’t be so bad after all haha. Seriously thought it was gonna be a massive pain but nope! Thanks to you I got it done. And as far as I’m aware this is the only video around that shows this technique and it’s an absolute life saver! So thanks!

My outlet has not work for a while and I thought had to replace the switch assembly. Nope! Just tighten med the plug contacts. How stupid of me to not check that first. Thanks James, this was a big help!

Can you use this sprayer for oil based paints ?

Where di you get those bolts??

Im baffled that you have a completely dialed in air mix setup, arguably the best method of cabinet finishing and you got a nice looking couch completely uncovered with your gun resting on it. I'd be thrown off any job instantly for this.

I drove one of these 2015's for work 5 days a week, 8-14 hours a day for two years straight, and it severely messed up my back. It weakened my core, it led to severe anterior pelvic tilt and a terrible hernia. All of which I am still dealing with today. Being that that was my job, surgery was out of the question, because the recovery period was way too long. I was very active during my off time, but I just could not keep my core engaged enough to combat the effects of this seat. So anyone expecting to drive one of these for long periods of time, be forewarned, they could be quite costly.

Note... The round holes are indicative of pre-2005 and those pulleys are THIN. They are weak and break. Replace with a 2005+ pulley which have elongates holes and are MUCH thicker.

Thanks a bunch. :)

How did you install the jessem on the ridge saw?

SOOO happy its such a simple fix for something so annoying (plug keeps falling out). Anyone doing this make sure you unplug the vacuum first.

what a great video thank you! this is exactly the problem I needed to solve, cheers!

Thanks for saving me 68 dollars!!, took about 5 minutes and the CT 26 works great now!

That thing you called a “dampener” is the air valve and it’s a POS.

I have a Manchester. Sooooo many issues. The secondary air tube that runs up to the secondary burners had a hole burn into it. Nobody knows how or why. The front glass seal isn’t even acting at a barrier seal on the top of the glass. It’s just glass to metal. I’ve had to replace the baffle 3 times now because, either someone hits it with a piece of wood or it eventually splits due to heat I’m guessing. The secondary middle tube always falls out and the first one closest to the door fell out. It barely had enough metal to stay inside its air channel. The side door has that secondary metal door to prevent it from swinging down but, they put the tiniest pins on its side they could find. I had to replace that because, someone leaned on the door when they were loading wood in and a pin broke. I am replacing this POS after this winter. I’m so done with replacing parts on a $5500 wood stove after 5 years of use. I should only have had to replace seals at this point. Glad I didn’t get the one with a cat in it. I could have bought a cheap wood stove and had none of these issues. Yet, the wife insisted on buying some prettied up way overpriced POS. Which, holds nowhere close to the amount of wood my old stove did. On top of that the old stove would roast us out of the house and never had a fan. Hearthstone charges you $550 for a fan. I mean seriously people. It’s a friggen fan. There is absolutely nothing special about it.

They suck, heavy, clunky, don’t roll up well, they kink and just hard to work with.

يومك سعيد لدي طابعه Epson 4525 وبعد تشغيلها يتم عرض error وشكرا

did you have any problem with the catalyst? how clean it or do we have to clean it?

Thank you!

It worked! Thank you for your generosity, James!

That what she said! 03:19

This printer sucks balls, I have this and I had the same problem.

I don't know if you were unlucky, and me very lucky. I own this machine for the last 14 years and still works pretty good except for this nozzle problem. I did not have to make a lot of maintenance, which rarely happened before. I printed 4490 pages (3868 colors 622 B&W) according to the report. Thank you for your very helpful video!

Thank you my brother he made it 123 for me you have a great day

Gotta look for screws that might work!? Woooooow. Buy something like this and they can't even fix it. Yeah I'd take function over stupid pretty looks any and everytime. Just got one ourselves and it wasn't my choice. Yaaaaaay lol.

Used this method as prescribed on a well used 3045CN just now - worked a treat - thanks for saving me some time and money there.

Can't hear you

Bro why are you spraying next to an uncovered couch and sliding door..with lacquer??

I own a Manchester for the past two years... we love it warms up the entire house ( 3000 sq. Fett we haven't have any problems with doors ..... we load stove around 6 PM and we reload the following day and believe me keeps the house nice and warm all night.....

Dude something is definitely wrong with your truck you need some fresh flow plugs

Water base primer much better

Does that wire on the front of the clutch come off or would i have to get a whole new clutch if that wire is ripped?

Soooo… it is a standard right hand thread?