14 күн бұрын
21 күн бұрын
Ай бұрын
2 ай бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@NZFamous 7 күн бұрын
Could be worse, could be an Audi.
@sangkurriang4748 Ай бұрын
.
@MrStanislavcho 2 ай бұрын
Where is part 2?
@Venture_Bros 2 ай бұрын
kzbin.info/www/bejne/kGPIlayQlr-Sr7s
@davojet5151 2 ай бұрын
Thanks for the video, i have the same leak from the cooling system at 2:39 is it normal ? Could you fix it ? If yes, how ? 😅 Thank you !
@Venture_Bros 2 ай бұрын
Its common on Sparks, how much is yours leaking, you can reseal it if needed.
@davojet5151 2 ай бұрын
@@Venture_Bros it’s not that much I read on the technical notice that you need to remove the reinforcement hull and reseal but it’s not that easy, to remove it you have to remove the engine mount 😅 Thank you !
@user-ke5cv6wl1w 2 ай бұрын
Para que ese ese tubo que tiene adelante
@tamastoth6256 4 ай бұрын
318...compare??? 2.4???
@Venture_Bros 2 ай бұрын
2.0 vs 2.4 Vtec
@jet121 7 ай бұрын
Hi mate, how has the jb weld held out?
@Venture_Bros 2 ай бұрын
Good so far no leaks yet
@jet121 7 ай бұрын
Hey mate, how high did you fill the hull? I'm trying to check if it leaks without taking the top off first.
@Venture_Bros 2 ай бұрын
Just under the battery depth, tip the jet ski back so the water can fill up in the back more.
@stevefrost8789 8 ай бұрын
2 good ways to do this.. no1 is to use a thin tube of stainless.. [push fit with loctite ] called a speedy sleeve.. and what these guys did... boat epoxy resin is good for this as well.. these guys keep leaving out key features in there vids.. the way to sand this coated shaft is to use 40mm wide emery paper nearly a meter long and to see saw right around.. .. like shinning shoes
@kristian4279 8 ай бұрын
On yah lads
@robbieatkinson5282 8 ай бұрын
Promo-SM 🏃
@josephmorgan4 8 ай бұрын
how did you crack teh trans from the Engione?
@Venture_Bros 8 ай бұрын
As long as all the bolts are out of the bellhousing and also the 3 removed from the torque converter it will come off pretty easy, sometimes need to use a flat head screwdriver to help.
@josephmorgan4 8 ай бұрын
@@Venture_Bros cheers mate I’ll give it another try. I’m pretty sure I have removed all the bolts just don’t seem to want to come but I’ll keep trying. Thanks amte
@psi23k 8 ай бұрын
Why the music?????????
@DoctorWEBB 8 ай бұрын
It was cleaning up so nicely. Why part it out?? Parts for these Vt -VX are plentiful and cheap as chips. That VX had a straight body, the paint even looked ok. Be a perfect daily for someone to make use of. Now you've got parts everywhere to store and advertise. Youve got $hit everywhere that's a pain to step over ,look at and you can't even take it for A backroad rally or lil skid in the AM hours. Plus you've wasted hours cleaning and pulling it apart. Before 1 major part sells...how about putting old Scully back together. THE VX Files is a good show mang. Rewind this wasted commodity.
@BiltongBoy 8 ай бұрын
great video guys but would have been top notch if you also video'd the seal replacement on the PTO and the gasket? any liquid needed on the seals when fitting in ? and also for the gasket ?
@korkad204 9 ай бұрын
Burn in hell, you devil’s child 🤣👍 you need Metallica, playing in the background
@techo61 9 ай бұрын
Wow, he blew a tyre, how did that happen?
@chrisrobbins9058 10 ай бұрын
Money doesn’t come with brains. Jags are for idiots who think Saturns are race cars.
@noran3379 10 ай бұрын
First comment 👍
@Venture_Bros 10 ай бұрын
Second! haha
@AlbertBakaev 11 ай бұрын
Like from Russia
@Venture_Bros 10 ай бұрын
Thankyou
@hudsonward7451 Жыл бұрын
I have a 2017 spark I’m working on, I can’t figure out how to remove the drive shaft
@Venture_Bros 11 ай бұрын
O just seen your comment, did you get it removed?
@JoseRides Жыл бұрын
What was the reason for the steel weld? Do you think you could have done this without removing the engine?
@Venture_Bros 11 ай бұрын
The steel wield was just to build up a hard surface that could be sanded down for the seal to seal against., yes could be done without removing the engine but was much easier to remove it so we could sand the surface smooth and measure it to make sure it was round.
@alisonrahn9873 Жыл бұрын
Seadoo or Yamaha?
@Venture_Bros 11 ай бұрын
Seadoo :)
@Lee-pj5vf Жыл бұрын
Amazing! Thanks boys
@Venture_Bros 11 ай бұрын
Glad you enjoyed it :)
@kiriakosch1739 Жыл бұрын
5w30 normal..
@Venture_Bros 11 ай бұрын
Yea 5w30 is normal, cant remember why we were given the 10w30 now, but i did read both are fine for this engine.
@henryhenry5897 Жыл бұрын
How many hours and year
@Venture_Bros 11 ай бұрын
its a 2014 not sure of the hours but very low use
@jrreich80 Жыл бұрын
Thanks for the great video! Where did you source the seals from or do you have part numbers for them?
@Venture_Bros Жыл бұрын
Hi we got them from Aaron Marine - aaronmarine.co.nz we just emailed them about it and they sent us all the bits we needed.
@jrreich80 Жыл бұрын
@@Venture_Bros Thanks again!
@afrexk7889 Жыл бұрын
it threw up
@Venture_Bros Жыл бұрын
Classic audi
@NZFamous Жыл бұрын
"I would help but" should be your slogan.
@Venture_Bros Жыл бұрын
haha I need to get that on a t-shirt
@tylerwatson2938 Жыл бұрын
That is engine mounts
@Venture_Bros Жыл бұрын
Yup, that's exactly what it was so I ended up replaced them
@hansmika Жыл бұрын
Few zip ties will do the trick 😂
@Critter0817 Жыл бұрын
Delicious
@Venture_Bros Жыл бұрын
So nice aye.....
@NZFamous Жыл бұрын
Audi, chocolate milk edition.
@Venture_Bros Жыл бұрын
NESQUIK audi edition
@Venture_Bros Жыл бұрын
Would you like to see more road trip videos?
@ayeshaabbas7464 Жыл бұрын
I like this song❤
@Venture_Bros Жыл бұрын
its good aye
@eprohoda Жыл бұрын
splendid shots~ see ya, bestie!
@Venture_Bros Жыл бұрын
Thankyou
@christopherjackson2172 Жыл бұрын
Im noone going to mention the coolant pissing from the motor?
@Venture_Bros Жыл бұрын
Ssshhhhh haha the cap was broken and wouldn’t stay on haha
@ba.skidderLOCKDOWN Жыл бұрын
Yep i destroy tires too
@Venture_Bros Жыл бұрын
Its good times
@ozwasp Жыл бұрын
Sweet bro... A better investment than a house in Auckland
@Venture_Bros Жыл бұрын
hahaha true that
@manutra90 Жыл бұрын
Not healthy my friend😅😮
@Venture_Bros Жыл бұрын
Is it not 😂
@manutra90 Жыл бұрын
Just drink an beer 😅😅🎉
@DTD5713 Жыл бұрын
Hey bro what rims are you running in the front?
@Venture_Bros Жыл бұрын
20" Niche wheels
@chedrwastaken Жыл бұрын
i can tell by the plate that you guys sre in new zealand, because nowhere near as many cars were imported is it difficult for you to find replacement parts (ignoring buying new online)
@Venture_Bros Жыл бұрын
Yea I have a few parts hear for them off other ones that I scraped. but mostly buy them new.
@venttizae8639 Жыл бұрын
@@Venture_Bros not too sure about pads in nz but if this is what most of them are like and they wonder why we skid on the roads 🤣
@PlsCallCYFS Жыл бұрын
@@venttizae8639 it’s not even a pad. Literally just someone’s back yard 😂 go look at actual event pads
@bladecppro26 Жыл бұрын
once the jet pump is removed will the drive shaft just pull out of the pto to apply grease to the ends ? or will the pto cover need to be removed to get the shaft out ? thanks for showing your videos -John in Texas
@Venture_Bros Жыл бұрын
Hey John, there is a small boot on the end of the drive shaft, but you can remove the clip and slide it back without having to remove the PTO cover. cheers
@zuimmy2043 Жыл бұрын
how can i make sure that my pto is bad? i have a 2015 seadoo spark with only 40 hours never ridden in salt water. it was riding really good the whole time i rode it then parked it for a bit and next time i took it for a ride it was revving up and making a slight noise but not going over 8mph. i thought it sucked up some rocks but i took apart the jet and the Wear Ring and Impeller has no damage at all. it was full on gas. i have no idea why this happened if anyone has any knowledge on this please let me know.
@Venture_Bros Жыл бұрын
O really that's a tricky one, my first thought is to check the wear ring, I would make sure you have no damage to the impeller and check the splines on the drive shaft, also check the wear ring alignment and make sure it has no cracks in it, but without seeing it it's hard to know, let me know tho how you get on.
@Vincent-fq9vx Жыл бұрын
Awesome video! Do you have to be careful with the driveshaft alignement? Heard something about this and it being a crucial factor for it holding up over time. Thanks!
@Venture_Bros Жыл бұрын
Yes I do like to make sure its all aligned, just a quick check to make sure.
@badtoyo9649 Жыл бұрын
you're supposed to start the engine, then run the water... and shut off the water before turning off the engine...
@Venture_Bros Жыл бұрын
Yes that's how I usually do it when we have been out on the ski.
@idrivem9124 Жыл бұрын
You may want to disconnect battery next time...
@Venture_Bros Жыл бұрын
That's probably a good idea.
@toyota2578 Жыл бұрын
Молодцы Ребята !
@Venture_Bros Жыл бұрын
Спасибо
@nickmast45 Жыл бұрын
Did the same JB weld/sanding method on my 3up 90HO spark and it worked like a dream, 30 hours later still strong. Just make sure you replace the PTO housing!
@Venture_Bros Жыл бұрын
Cheers, yes I have heard it lasting along time, We replaced all the seals in the PTO while we were in there.
@wonderfulman2560 Жыл бұрын
I did a full top end rebuild on an ecotec, great engine to work on, good video!
@Venture_Bros Жыл бұрын
Awesome, thanks!
@simonmunchen5914 Жыл бұрын
How many litres did you put of penrite transmission oil ?
@Venture_Bros Жыл бұрын
Thats a good question, i dont know haha