I have the same problem, the screen stays black and then a streak appears. I've already installed and uninstalled it countless times. and it doesn't work. any suggestions?
@mdfarman30126 күн бұрын
Its only showing a - in black screen Please help me out of this problem
@HezekiahZp6 күн бұрын
same, please help
@user-gp4pq8py5y7 күн бұрын
Operating system use 32 bit or 64 bit?
@TECHEONICS6 күн бұрын
32
@HuyNguyen-rg2mn8 күн бұрын
Great video !!! Thank you
@duck50009 күн бұрын
Does it work with raspberry pi 5?
@artemt1987ify11 күн бұрын
Thanks for the video!
@abhijeetkarmakar160911 күн бұрын
Can I use the camera module 2 with raspberry pi 4
@abhijeetkarmakar160911 күн бұрын
I have 2gb varient
@TECHEONICS11 күн бұрын
Yes
@abhijeetkarmakar160911 күн бұрын
@@TECHEONICS sir if I have a problem regarding this can I connect with you
@abhijeetkarmakar160911 күн бұрын
Which operating system you are using is this is a bullseye legacy?
@abhijeetkarmakar160911 күн бұрын
I followed your process but it won't work for me can you please help me I am trying this upto 5 to 6 days
@negative172314 күн бұрын
i need the screen to be separate from the PI. where is the GPIO cable to connect them? is it 8 pins? i don't see any but a 40 pin cable. will that work.
@TECHEONICS13 күн бұрын
www.ribbon-cable.com/product/raspberry-pi-gpio-extension-cable-jumper-wires/ This will work or similar one
@ektadesai394114 күн бұрын
After completing all steps I tried writing my 1st code on thonny but my keyboard of laptop was not working.pls help me. Only alphabets and number keys are not working
@TECHEONICS13 күн бұрын
1. VNC Server Configuration: * Keyboard Layout: Ensure that the keyboard layout in your VNC server settings matches your physical keyboard. Incorrect layout settings can prevent proper key recognition. * Keyboard Mapping: Double-check if there are any custom keyboard mappings or shortcuts that might be interfering with typing. If you've recently modified these settings, try reverting them to default. 2. Raspberry Pi Configuration: * Keyboard Layout: Verify that the keyboard layout is correctly set in the Raspberry Pi's configuration. You can access this through the "raspi-config" utility. * USB Hub Compatibility: If you're using a USB hub, ensure it's compatible with the Raspberry Pi and that it's providing enough power to the keyboard. Some USB hubs might have power limitations. 3. Keyboard Issues: *Physical Damage: Check for any physical damage to the keyboard, such as broken keys or loose connections. * Driver Issues: If you've installed any custom drivers for the keyboard, ensure they're compatible and functioning correctly. Update Raspberry Pi Software: *Ensure that your Raspberry Pi's software is up to date. Outdated software can sometimes cause compatibility issues. Check for VNC Server Updates: If you're using a third-party VNC server, check for updates and install them if available. If these steps don't resolve the issue, please provide more details about your setup, including the VNC server you're using, any custom configurations, and any error messages you might be encountering.
@ektadesai394113 күн бұрын
@TECHEONICS sure I will update and let you know Thank you for the reply
@SlenderKS15 күн бұрын
where's code ? nvm just found. It's on a black button on thesite.
@TECHEONICS13 күн бұрын
Check out complete details at = techeonics.com/maxsonar-ultrasonics-sensor-with-arduino/ Github github.com/gauravk5/MaxSonar-EZ0-Sensor
@chriswong985116 күн бұрын
I inserted the sd card to the raspberry pi, nothing shows in the advanced ip scanner, the raspberry pi has been flashing inconsistently (irregular number of flashes), for over 2 hours. When I try to reset the sd card with the imager, the passwords (login and wifi) changed to unreadable hashes. Is this a common issue, and how can I fix it? Thanks
@TECHEONICS13 күн бұрын
The issues you're experiencing with your Raspberry Pi are likely due to a combination of factors. Here's a breakdown and potential solutions: 1. Inconsistent Flashing: * Corrupt SD Card: The SD card might be corrupted, leading to inconsistent flashing. Try formatting the SD card and flashing the image again. * SD Card Quality: Ensure you're using a high-quality SD card specifically designed for embedded systems. Poor-quality cards can be unreliable. * Power Issues: Inadequate power supply can cause flashing inconsistencies. Make sure your power adapter is providing sufficient power. 2. Unreadable Passwords After Reset: * Imager Configuration: Check the imager settings to ensure you're using the correct password format. Some imagers might require specific password encoding. * Imager Version: Outdated imager versions might have compatibility issues. Try using the latest version. 3. Advanced IP Scanner Not Showing the Pi: * Network Configuration: Verify that the Raspberry Pi is correctly configured to connect to your network. Check the IP address and subnet mask in the Raspberry Pi's configuration. * Firewall Settings: Ensure that your router's firewall isn't blocking the Raspberry Pi's network traffic. Troubleshooting Steps: * Format the SD Card: Use a reliable SD card formatting tool to format the card. * Flash the Image Again: Use a fresh Raspberry Pi OS image and flash it to the formatted SD card. * Check Power Supply: Ensure you're using a suitable power adapter for the Raspberry Pi. * Verify Network Configuration: Double-check the network settings on the Raspberry Pi and your router. * Disable Firewall Temporarily: If you're using a firewall, temporarily disable it to see if it's blocking the Raspberry Pi. * Try a Different SD Card: If the issue persists, try using a different SD card. * Update Imager: If you're using an older version of the imager, update to the latest version..
@chriswong985113 күн бұрын
@@TECHEONICS Hi, thanks for the reply. I have formatted the SD card in fat32 format. I am using a 128GB one, which I bought just a few days ago. For the imager, when I input the passwords, it seems fine, but when I reopen the settings, the password textbox becomes encoded with hash. I tried with different versions of the imager from 1.8.5 to 1.7, but the problem still exists. I suspect that it can't connect to the wifi because of this changed password problem. I try to connect the raspberry pi to a monitor through HDMI with a new strong cable, and it does show some lines of processing code on the screen, but every time it is about to reach the line for login, the HDMI disconnects, and I have to replug the power source to allow it to boot again, making it an endless loop lol.
@IrfanAli-nj7lm18 күн бұрын
Hello sir how can I get Arduino code of this project?
Can i use male and female wires instead of staining them?
@TECHEONICS27 күн бұрын
Yes
@maicoulАй бұрын
I'm using the 3B+ model
@maicoulАй бұрын
the screen only shows the dash on a black screen... do I have to use the default username and password?
@TECHEONICS29 күн бұрын
Is this after first boot or after installing the driver ?
@maicoul25 күн бұрын
@TECHEONICS yes, after installing the driver, when call a first boot.
@TECHEONICS19 күн бұрын
@@maicoul CONNECT HDMI AND REINSTALL THE DRIVERS
@mdfarman30126 күн бұрын
I am also facing same problem
@Jeetmondal04Ай бұрын
Vai raspberry pi any model ko kaise kharid sakte hai
@pie-pod584Ай бұрын
Thank you!!! 😊 🍕
@Ravi-wv9tfАй бұрын
Hello can we connect , PH sensor+tarbudity+ and tds meter together using Arduino
@TECHEONICSАй бұрын
Yes
@Waveshare_RuanАй бұрын
Thank you for putting so much effort into creating and sharing this video with everyone. This video provides accurate guidance for 3.5-inch screen buyers and is particularly helpful for Waveshare customers. It assists them in quickly setting up the correct resolution and touch functionality. I believe Waveshare should offer you the greatest discounts on products, or even provide them for free. If you have ideas about incorporating other new Waveshare products in your future videos, I will do my best to secure the greatest product discounts for you!
@TECHEONICS19 күн бұрын
Thank you so much for your kind words and for appreciating the effort I put into creating this video! I’m thrilled to hear that it has been helpful to WaveShare customers in setting up their 3.5-inch screens. I’m genuinely excited about the possibility of collaborating with WaveShare on future projects. In fact, I’ve recently purchased and am working on a video series covering several of your displays, including the 3.5-inch, 5-inch, 7-inch, and 10-inch models. Additionally, I’ve acquired multiple other WaveShare products, which I find very intriguing. I plan to share videos and articles about these within the next six months. I’d love to explore further opportunities to work together, whether it’s through sponsored content, product reviews, or any other form of collaboration. Please feel free to reach out to me directly via my email = [email protected] Thank you once again for your support, and I look forward to potentially working together in the near future! Best regards, Gaurav www.techeonics.com [email protected]
@TestopapstАй бұрын
How to setup Ubuntu Image headless? Nothing works for me I tried create /boot folder with "ssh" file and "wpa_supplicant.conf" but i cant connect via ssh
@ianb282Ай бұрын
if you don't see settings CtRl+Shift+X still works in ver 1.8.5
@hussain8712Ай бұрын
Sir my wifi of Raspberry pi is not getting connected. I am using 64 gb m3mory card to my rpi will this can cause any error?
@TECHEONICSАй бұрын
SD card is not the problem try plug in a display with the Raspberry Pi and see if it's put up or not if you don't have the display available right now just burn the OS on 16 or 32GB SD card do set up the Wi-Fi from the pi imager settings and do mention country code as well in the Wi-Fi setting
@ahammedmishal1622Ай бұрын
will this 3.5 works on rpi 5 ?
@TECHEONICSАй бұрын
Yes
@ahammedmishal1622Ай бұрын
@@TECHEONICS make a video on that brother :) rpi 5 is the latest one
@diana-xr1wk17 күн бұрын
@@TECHEONICS i try using rpi 5 but it only turned dark and work as mouse pad only
@appsidal15 күн бұрын
I suggest, using the raspian os image from lcdwiki, you just need to flash it. and it works on pi5.
@D1204PrivetdriveSociety2 ай бұрын
Good video. Please upload the hdmi comparison.
@TECHEONICS2 ай бұрын
On it
@timerskine2492 ай бұрын
Up and running in a couple of minutes.....let the fun begin. Keep the videos coming.
@abdulmelikdemirel2 ай бұрын
Does it still work not touching the glass at all?
@lairdo122 ай бұрын
Thanks so much. Exactly the info I needed to set up a headless Raspberry Pi 5. All the steps worked perfectly, and I am currently running running updates through my VNC viewer's interface to the machine.
@user-fn7iy2cm5x14 күн бұрын
which vnc should i download windows or raspberripi
@stephencurry94222 ай бұрын
Hi sir may I ask if it can detect coliform bacteria too
@rahulb82062 ай бұрын
is it possible to use without the LCD display
@TECHEONICS2 ай бұрын
Yes
@nikomose3 ай бұрын
not work :(((
@did3d5233 ай бұрын
why with V2 of farmware imposszible to have 10 channel?
@jollyrelatado99873 ай бұрын
I have a a question can you use LGZD sensor rather than MJKDZ sensor? in turbidity?
@fardinrahman8934 ай бұрын
Can anything will be wrong if i use 10k thermistor instead of 4.7k thermistor?
@TECHEONICS3 ай бұрын
Using a 10k thermistor instead of a 4.7k thermistor in acircuit will likely cause incorrect temperature readings and require recalibration of the circuit. Use the Potentiometer to set the value after calibration
@robindreamer39304 ай бұрын
Is it 100k potentiometer? The circuit diagram shows 500k and the listed materials show 10k. I can't seem to run this
@TECHEONICS4 ай бұрын
In the video I use 104 potentiometer which is 100k. You can go with 100k or 500k potentiometer both will work
@putriristyawardani4094 ай бұрын
I have problem on code lcd.init(); // initialize the lcd How can i solve it? Please help me
@TECHEONICS4 ай бұрын
Did you add the i2c Lcd library?
@TECHEONICS4 ай бұрын
Check out the post for more info - techeonics.com/fan-controller-with-ua741-ic/
@rajveer..4 ай бұрын
Bro what is the resistance of the other resistor 470 ohm or 47 ohm?
@TECHEONICS4 ай бұрын
47 ohm Check out post for more info - techeonics.com/fan-controller-with-ua741-ic/
@truptibawankule40284 ай бұрын
i am unable to do.
@TECHEONICS4 ай бұрын
What's the issue?
@ilmanu4 ай бұрын
Hi man... Great video 👍
@jackchitte4 ай бұрын
Graphics Card bata
@nicolasweidinger4 ай бұрын
I'm trying to detect soil moisture, is it possible to adjust the sensitivity? Thanks!
@user-kx1qw9iw4g4 ай бұрын
what project would you make with this and how much is this?
@srishivaharikannan93635 ай бұрын
i have a doubt my raspberry pi is not giving any ip address and the green light also stops blinking after 2 min is it a software issue or hardware issue?
@TECHEONICS5 ай бұрын
It could be either a software or hardware issue. 1. Check power supply. 2. Ensure microSD card is inserted properly with a valid OS image. 3. Verify all connections. 4. Test with different power supply and microSD card. 5. Monitor boot process via HDMI.
@redskull1890Ай бұрын
@@TECHEONICS can I use 64gb microSD card in 3b+ Rpi??
@rhettbrewer4648Ай бұрын
@@redskull1890 Yeah, it doesn't matter about the size, I also use a 64gb microsd in my 3b, and 4b
@iffahfatnin74565 ай бұрын
hii , may i know where do you buy the DFrobot liquid level sensor ?