Was a badass show! Looking forward to being there next year!
@ScottMartin-jx8ctКүн бұрын
I'm definitely going try to make it next year
@BlessedPerformanceКүн бұрын
@@ScottMartin-jx8ct you don't want to miss it
@coltthibodeaux48743 күн бұрын
Will these work for a ‘03 6.0 ?
@BlessedPerformance3 күн бұрын
@coltthibodeaux4874 no sir you have thread in reliable stand pipes
@NellyZachary-u6q3 күн бұрын
Williams Kenneth Allen Scott Rodriguez Susan
@dirtbikefreak100013 күн бұрын
How can I get my front end to not hop on my 05? Have 4 link set up but front end still hopping? Should I still run a strap to hold front end down?
@BlessedPerformance3 күн бұрын
@dirtbikefreak10001 that's what we would recommend is pull all the suspension out possible with a strap
@kauabarros96383 күн бұрын
It’s Friday . We drinkin. I have no clue what I’m doin lol
@hosshoward91183 күн бұрын
New intro looks good Matt
@BlessedPerformance3 күн бұрын
@hosshoward9118 thank you!!
@One_More_Summer_Garage5 күн бұрын
i hate butterscotch
@BlessedPerformance5 күн бұрын
@One_More_Summer_Garage exactly my point and the reason we offer more custom options with our custom tuning than any other company.
@Doom6.06 күн бұрын
I’m running the SCT Livewire and very happy with it. 6.0 Excursion!
@BlessedPerformance6 күн бұрын
@@Doom6.0 yes they are solid
@aidenbeeson2688 күн бұрын
Great video thanks man!!
@BlessedPerformance8 күн бұрын
@@aidenbeeson268 thank you!
@PrimeMoverFitness10 күн бұрын
Thank you!
@BlessedPerformance10 күн бұрын
@@PrimeMoverFitness thank you for watching our content
@randywendt16 күн бұрын
You could definitely hear the difference. I’m not sure my 6.0 sounds like that.
@Kevin-midmichigan17 күн бұрын
Finally,,someone explaining it...thanks brother.
@BlessedPerformance17 күн бұрын
@@Kevin-midmichigan thank you!!!
@MyBlowncobra18 күн бұрын
Heck ya..get that stuff matt and Kara..wish I could be there
@BlessedPerformance17 күн бұрын
@@MyBlowncobra thanks man!
@bobbyjacques554118 күн бұрын
Just ran across this video last night. I have an 03 6.0 with a new engine from DFC and it runs amazing Change out most of the sensors with OEM sensors...only EBP and VGT are still the originals). Has about 3K on the new engine. Just last week I noticed a surge while at idle. It's not all the time but it seems to be happening a little more every time I use the truck. I did the checks as mentioned in the video with my Edge Insight monitor and it reads MAP at 15psi, BARO at 15psi and EBP at 0psi (I'm here in Mississippi so close to sea level). So guessing it's time for a new EBP sensor?
@BlessedPerformance18 күн бұрын
@@bobbyjacques5541 that or you are on an inferred ebp strategy that is not using that sensor
@bobbyjacques554118 күн бұрын
@@BlessedPerformance so with this intermittent surge at idle. What else should I look at? My IPR and VGT seem to be looking ok. ICP seems ok as well.
@bobbyjacques554114 күн бұрын
@@BlessedPerformance Well I went ahead and ordered an OEM EBP sensor. Today I played around with the monitor and did a KOEO of MAP at 15, BARO at 15 and EBP at 0. Then started the truck and it was at MAP at 15, BARO at 15 and EBP at 2. Then revved it a little and EBP went up to 4. Bad EBP? Sensor is going to be here today. What are your thoughts?
@BlessedPerformance13 күн бұрын
@bobbyjacques5541 we offer all the parts you could need also give us a call 1-800-577-2698
@Kevin-midmichigan20 күн бұрын
Man just don't know where to turn and what to add to make reliable daily and p/t towing 12k rig..too many options and everyone has a different opinion..only ones I've seen is your parts and kc tow package are almost identical..How can I justify putting $8k into something that still running fine..change my mind..I guess I want reliability when I'm 2000 miles from home..What's your email I need to pick your brain
@BlessedPerformance20 күн бұрын
@Kevin-midmichigan give us a call we would love to chat 1-800-577-2698 or [email protected]
@jeffcamp900821 күн бұрын
I have an 04 6.0 and i don't hear the turbo whistle , on my 05 i hear it good . Is there a difference?. I also have turbo lag seems like after it get up to operating temperature when cold it doesn't it also blows black smoke, i just bought the truck so no history on it. Thanks
@BlessedPerformance21 күн бұрын
@@jeffcamp9008 you would need a scan tool to watch some data and diag the truck brother
@mattscow100322 күн бұрын
I wish the Ole powerstroke ran.
@BlessedPerformance22 күн бұрын
@@mattscow1003 which Powerstroke? We can help
@mattscow100322 күн бұрын
@BlessedPerformance just a 6.0. I have to save money for the top end part of the build.
@BlessedPerformance22 күн бұрын
@@mattscow1003 oh shoot
@mattscow100322 күн бұрын
@@BlessedPerformance I started the build with your engine stand adapter.
@BlessedPerformance22 күн бұрын
@@mattscow1003 great addition to any shop out there!
@user-ms8tl2ci1u22 күн бұрын
The injectors atomise the fuel ,
@TaurusAndSonsTrucking26 күн бұрын
Have a question been looking at your fleece cheetah turbo my trucks a 06 currently stock with egr delete not studded but still running like a dream. My plan is to eventually drop in 205/30 with air dog 165 w a sump but with that being said the fleece cheetah looks like a option because it’s a drop in turbo with stock injectors. Should I go that route since I’m wanting to make atleast 600 hp In the future so I’m not changing up turbos
@BlessedPerformance26 күн бұрын
@TaurusAndSonsTrucking give us a call brother that Fleece Cheetah is a great turbo but the KC S2R will make more power and spool amazing for your setup.
@plherrington994726 күн бұрын
It needs a little more bend to it where it goes across the top of the radiator.
@BlessedPerformance26 күн бұрын
@@plherrington9947 send us a picture of yours we would love to take a look
@plherrington994726 күн бұрын
@@BlessedPerformance wasn’t sure on how to attach pictures here and send. So sent them to your sales email.
@BlessedPerformance26 күн бұрын
@@plherrington9947 Perfect thanks
@crossxcats27 күн бұрын
what would tuner you pic for a 2006 6.0 ambulance o ringed heads and studs?
@BlessedPerformance27 күн бұрын
@@crossxcats SCT X4 would work great!
@crossxcats27 күн бұрын
@@BlessedPerformancethanks I'll definitely look into that one
@BlessedPerformance27 күн бұрын
@@crossxcats give us a call with any questions 1-800-577-2698
@mattcox-sr2kq28 күн бұрын
What was the ftlbs?
@Bengals3328 күн бұрын
Title is for 6.0 not a 6.4🤔
@BlessedPerformance28 күн бұрын
@Bengals33 yeah typo we will fix it my apologies
@Obsession_OBS29 күн бұрын
💪
@Obsession_OBS29 күн бұрын
Did yall have to wet the ground for the 6.0 to fet started but nit for the 6.4 so I say 6.4 for the win
@heavy_haul_n_foolАй бұрын
Also mad respect yall on the road and still answering questions for us customers
@BlessedPerformanceАй бұрын
@heavy_haul_n_fool oh hell ya that's how we roll!
@heavy_haul_n_foolАй бұрын
Yooooo lettts goooo
@justnsaliga8518Ай бұрын
When i did my engine rebuild bought new cts3 2 egt probes for each cylinder bank.... Easy to tell if a sides got weak injectors. Its piece of mind knowing whats going on with the other half of your Engine.
@BlessedPerformanceАй бұрын
@@justnsaliga8518 yes sir never a bad idea
@MyBlowncobraАй бұрын
Damn sounds super cool..wish I could be there with the system done
@Derek-g8fАй бұрын
So does it only work for the livewire and the x4 and not the bdx
@Fl-diesel-MechanicАй бұрын
What is in there dt466 mechanical?
@BlessedPerformanceАй бұрын
@@Fl-diesel-Mechanic yes sir its so badass
@jamesb229125 күн бұрын
Nice. I have a 1979 1850b with the 9.0 IH v8. I'm seriously considering a motor swap down the road. Did you swap axles?
@BlessedPerformance25 күн бұрын
@jamesb2291 no not yet working out gear ratios
@jamesb229125 күн бұрын
@BlessedPerformance mine has old Dayton wheels still. I'm wanting to put some newer one piece wheels with radials on it
@BlessedPerformance25 күн бұрын
@@jamesb2291 that's what I swapped to
@VariablecheeselessАй бұрын
The SCT actually has an EBP sensor on the gauge and it diagnoses a bad sensor when the ebp reading on the SCT X4 a constant number. Whenever it’s fluctuating, that means the ebp is good.
@michaelcarpenter8769Ай бұрын
Will the upgraded HPOP help with the truck to start quicker? I know Ford spec for the 6.0 is 5 seconds, but I’m looking for a quick bump start on my 6.0 if possible.
@unlikelyprophet3260Ай бұрын
Does truck need retuned or simply bolt on and go
@BlessedPerformanceАй бұрын
@@unlikelyprophet3260 you need a tune for this Turbo yes
@carljohnson-j1hАй бұрын
I'm having to do my 2006 6.0 for the third time. I'm looking into these.
@BlessedPerformanceАй бұрын
@carljohnson-j1h give us a call brother 1-800-577-2698
@eric91780Ай бұрын
Same here. Using the motorcraft standpipes and they're still not holding up to light use.
@BlessedPerformanceАй бұрын
@@eric91780 we can fix that for ya
@eric91780Ай бұрын
Yes. I plan on placing an order with you.
@BlessedPerformanceАй бұрын
@eric91780 thanks for the opportunity!!!
@Fl-diesel-MechanicАй бұрын
Nice looks good
@carmenyeeyee5174Ай бұрын
can you make a billet/polished clutch fan shroud for 2010 6.4? idk if that would make sense but it would look sick 😂
@BlessedPerformanceАй бұрын
@carmenyeeyee5174 yes we plan to make an electric fan kit for these
@oaktree185Ай бұрын
I have a c t s x4. I used to run the street tune. And It had no delay from a takeoff. The programmer got locked out. Was able to get it unlocked after a lot of updates. Now there's a couple second delay from a takeoff. After that it has great power. What do you suggest to correct? The couple second delay in the takeoff now. Would a custom tune address that?
@BlessedPerformanceАй бұрын
@@oaktree185 yes sir custom tuning should help
@AceBoy2099Ай бұрын
Im trying to decide if i should get this for my 05 with a new x4, or shoukd i go hp device?. I see on your site the sotf, does that incluse all the other tunes, or do i have to select 1-4 tunes and then the sotf somehow? Also do you do a loaner program to install a ficm tune if i dont have an hp device? Or would my only option be, short of buying, to send my unit in?
@BlessedPerformanceАй бұрын
@AceBoy2099 I would recommend the SCT version it's dramatically easier for you the end user. Sending your ficm to us is always much much easier and cheaper than purchasing and credits. We do not have a loaner program anymore because we never got the device back
@MyBlowncobraАй бұрын
Matt I'm loving the intercooler..
@BlessedPerformanceАй бұрын
@@MyBlowncobra yes sir! Thanks man!
@karlgregory8190Ай бұрын
only adds a 100hp nah looks like 120hp
@BlessedPerformanceАй бұрын
@@karlgregory8190 💪🤣💪🤣💪
@gdrael66Ай бұрын
Would love an update on this build after a few thousand miles...
@user-jm8gz2gx5nАй бұрын
Love your work keep posting like this❤❤
@BlessedPerformanceАй бұрын
@user-jm8gz2gx5n oh yeah that's gonna keep happening more to come!
@aztommy1687Ай бұрын
Be hard to go that far and not get a set of ported heads from KDD, guess it all depends on where you draw the line though. Still a very nice build.
@BlessedPerformanceАй бұрын
@aztommy1687 Powerstroke Products Ported Heads work great as well and are available at the moment
@aztommy1687Ай бұрын
Very true on availability, timeframe. Has there been a dyno and or flow chart comparison between both companies ported versions?
@BlessedPerformanceАй бұрын
@aztommy1687 not that I am aware of that would be a huge investment to test both back to back lol.
@hansshaffer3788Ай бұрын
I live in Hot Springs, SD- not too far from you. I have a 2001 F250 Superduty with the 7.3 Powerstroke. It has 325k miles on it. I've been using Rotella T4, but as I learn more I realize that I could do much better. I haul water and the occasional heavy load, but usually only put about 5k miles on my rig in a year. Which oil would you recommend for my truck? Thank you!
@BlessedPerformanceАй бұрын
@@hansshaffer3788 we would recommend Schaeffer's 15w-40 for your truck
@johnnycortez46Ай бұрын
That is awesome. Good for him. He deserves it. Seems like a great guy
@BlessedPerformanceАй бұрын
@@johnnycortez46 yes!
@TheBuckmaster63Ай бұрын
How much for your exhaust manifolds? I don’t see them on the website.
@BlessedPerformanceАй бұрын
@TheBuckmaster63 we will be listing soon brother around $500-$550 shoot us a message or give us a call 1-800-577-2698