are the savox better or is it because you are sponsored you like them?
@maxgotzlrc226613 күн бұрын
Hello, I chose the brand because of the quality and reliability. The servos last very long without any excesive play and provide the characteristics I need for good results in all of my cars.
@MrBoomtheroom14 күн бұрын
what's the main difference between the 23 and 24 models?
@maxgotzlrc226614 күн бұрын
Hello, the 2024 XB8 has more flex and shorter chassis to generate more grip and rotation, included Alu rear tower for more stability, new shock caps that allow you to run either emulsion or bladder type.
@paulsmithat478821 күн бұрын
Is there an aluminium one for dirt?
@maxgotzlrc226620 күн бұрын
Hello, what exactly do you mean one for dirt? If you mean the "high" hub, then yes, that one is also available in alu. Basically both, the "low" and "high" hubs are available in Medium, Graphite and Alu.
@paulsmithat478819 күн бұрын
@@maxgotzlrc2266 Thank you It wasn't shown in the video so I assumed what you showed was all that was all the options available. I will have a look for it.
@vcsss25 күн бұрын
AI Aussie accent?
@mikemccanna854823 күн бұрын
seven point! (for volts!)
@MrBoomtheroomАй бұрын
Thinking of buying a xray.. but unlike most buggies.they change models every year which to me means less parts produced for every model. what do you think?
@maxgotzlrc226628 күн бұрын
Hello, even though there is a new model coming out every year, it is mainly because we try to improve and bring something better with each edition, but the "older" models are still perfectly usable, or easy to upgrade to the new parts, unless there are some bigger improvements. There is generally no problem with having less parts produced, should be in stock anywhere!
@tomconnors8165Ай бұрын
All of these videos have been very helpful. Trying to learn my way through esc settings in general and everything seems applicable. Could not resist and my Oxide showed up yesterday and the car is on order. It looks and feels very nice, even the packaging is great. I would not have made that decision without these videos so thank you.
@maxgotzlrc2266Ай бұрын
@@tomconnors8165 hello, that is great to hear, thank you. I hope you enjoy your new ESC! 💪
@dmanalang90372 ай бұрын
I have the Nitride which I just purchased. Can the NItride be used for drifting?
@maxgotzlrc22662 ай бұрын
@@dmanalang9037 hello, it can for sure be used for drifting, as many users already did in the past! The Oxide is coming with some more features to make the experience even better, but doesn’t mean the Nitride can’t be used for that.
@theclutch192 ай бұрын
We need to seriously see the car upclose and not 5 feet away...
@Sonar99992 ай бұрын
Hi Max, could you please make a video about a good cable routing of the xb8E? Greetings
@RacewayOne2 ай бұрын
Nice straight forward video, thanks
@RyderT-dq4qf2 ай бұрын
What kind of wing is that
@maxgotzlrc22662 ай бұрын
@@RyderT-dq4qf XRAY lexan 1/8 Wing, which can be found under PN: #353512
@RyderT-dq4qf2 ай бұрын
@@maxgotzlrc2266 ok,nice car though,keep it up,and is that the xb8n 24?
@maxgotzlrc22662 ай бұрын
@@RyderT-dq4qf thank you! Yes, it is the Nitro XB8’24 👍
@HookedUpRacing20242 ай бұрын
When would you want to use either -3* or +3* kick up? What affect does that have on the car/truck?
@maxgotzlrc22662 ай бұрын
@@HookedUpRacing2024 more kick-up provides the car with more low speed steering and more high speed stability. The opposite will be noticed with less kick-up.
@HookedUpRacing20242 ай бұрын
Thanks! One more question on this topic - will changing the hub inserts from 2.5* to 5.0* have similar results? Or does the arm itself need to move?
@maxgotzlrc22662 ай бұрын
@@HookedUpRacing2024 this will have a similar influence too on the 2wd cars
@MX-CO2 ай бұрын
Is this the best car for 2024?
@maxgotzlrc22662 ай бұрын
@@MX-CO the ‘24 XB2 has been the biggest upgrade in our platform so far, so I would say so 😎
@MX-CO2 ай бұрын
@maxgotzlrc2266 every one at pur local track has an rc10b7, I want to try something different but I don't want to be at a disadvantage
@maxgotzlrc22662 ай бұрын
@@MX-CO I do not think you’d be in a disadvantage. So far the car has been pretty good to set up, but you can always hit up our team drivers at your area, depending where are you from and get help with fine tuning the car!
@peterpirolt69973 ай бұрын
Slicks ?
@maxgotzlrc22662 ай бұрын
@@peterpirolt6997 yes, too many battery packs on that set of tires, but still worked well 😎
@starlinggibson41173 ай бұрын
Are the Hall settings locked in blinky mode
@maxgotzlrc22663 ай бұрын
@@starlinggibson4117 if you change the hall angle setting, the blinky mode turns off. Better say, it does not show on the screen “Blinky” anymore, therefore is not allowed to be used in stock racing.
@mikestewart47523 ай бұрын
👍👍 NOT made in China! ❤️🙏
@timothypence11953 ай бұрын
What is the motor limit?
@martinbollenbacher30663 ай бұрын
Awesome Video but a few days late😄. Unboxed mine on Wednesday and used it first time on Friday. Easy to use and reliable Speedo. At the moment it is installed in my Stock 2wd Buggy with a 13.5t Motor. Testing on Friday and a Race on Sunday without any issues. 👍 I am looking forward to see more content about this controller.
@floridalife78774 ай бұрын
Is there a toe chart for the 1 degree block like there is for the 3 degree block in the manual?
@maxgotzlrc22664 ай бұрын
Hello, I don’t think so, altough the toe chart can aply to the 1° block, just subtract 2
@peterpirolt69975 ай бұрын
Don't have a question about the Arms but why do you run the shock on the shocktower on the lower holes ?
@maxgotzlrc22664 ай бұрын
Hey, sorry if I haven’t answered your question also last week in France, but I use the lower holes to make the car more stable.
@bonxiegizmo5 ай бұрын
Just wondering why I have no reading of motor temperature. All is connected, including sensor wire.
@maxgotzlrc22665 ай бұрын
Hello, could you give me more info about what motor are you using? It is possible your type does not have a temp sensor and therefore does not support temp monitoring.
@bonxiegizmo5 ай бұрын
ZTW , Ruddog and Fantom. All 6.5 and 7.5
@mateematee72475 ай бұрын
Hezka jizda💪👏👍gopro?
@gmourt5 ай бұрын
Hi, at the 1st example, you select boost 1 = 10 and boost 2=15. On the diagram I can understand that the boost 2 value is "absolute", means counting from zero, thus the total boost is 15 (not 10+15=25). But, at the 2nd example, boost 1 (10) and boost 2 (10) values are cumulative according to the diagram (10+10 = total 20). I wonder why this difference.
@maxgotzlrc22665 ай бұрын
Hello, thank you for the question. I have made a mistake on the setting and that’s why I corrected my talk with a little note in the video saying “*Double value”. What I meant to show was Boost1 at 10 and Boost2 at 20.
@drewhamilton69066 ай бұрын
Very helpful information, thank you
@tek007328826 ай бұрын
How about the 2,0mm chassis? It's just too expensive to buy and try out..
@maxgotzlrc22662 ай бұрын
@@tek00732882 hello, sorry for my late reply. The 2mm chassis gives more flex and therefore generates more grip. When you run on lower grip or bumpy condition, the 2mm is a very good option for more generated grip and performance.
@bertrandferrere19947 ай бұрын
Thanks a lot : very clear and informative vidéo ! I'm currently waiting for my Elceram Esc and my new car also : checkin tracking every hour 🙂
@stackitwithbricks71037 ай бұрын
Love your vids keep going mate 🎉
@macmondo747 ай бұрын
Thanks Max these videos are gold. Very good information.🙏👍
@Slatanicmushroom7 ай бұрын
Very well explained, thank you!
@eddiejones23287 ай бұрын
You mentioned that you cannot use the kit pills with the 1degree block which ones can you use then?
@maxgotzlrc22667 ай бұрын
You cannot use the same settings, because the D block is narrower compare to the kit one. If you used the same inserts as on the kit one (lets say outside on the C block and inside on the D block), you would actually get toe-out on the rear suspension, which is not desired.
@eddiejones23287 ай бұрын
Oh okay I thought you meant eh pills them self were different
@extec1017 ай бұрын
could you recomend the short chassi option for a xb2-22 im using the kit one right now but got an idea to use the short chassie to move the gearbox forward and move rear hubs back in the arms to keep the overal wheelbase the same as kit version but the weight of motor and gearbox more forward in the car to make it rotate more free in the back as the car is used for carpet and high traction astro.
@maxgotzlrc22667 ай бұрын
yes, this can be a good option if you run on high grip. Keep in mind, that the 2024 car has different chassis compare to the the '22
@extec1017 ай бұрын
need to get that carbon motor mount it looks sweet. what might the weight savin be in grams compared to the alu ones?
@timothypence11957 ай бұрын
Need to improve volume in future videos, please.
@user-tf4sx5oq6d8 ай бұрын
Can you do a video on the 1deg D block,what it does and when to use it.thank you
@Aftehours070838 ай бұрын
Thanks, it can be hard for people new to setup to understand the difference between high and low and how these changes affect roll center.
@wimdehertogh2289 Жыл бұрын
What setupboard is this?
@maxgotzlrc22667 ай бұрын
I use the HUDY setup boards for all of my classes.
@jb-elektronik Жыл бұрын
New nitride brushless regulator made in Elceram: kzbin.info/www/bejne/eKq0gJ2neM98fsk
@christianryser34202 жыл бұрын
Und benötigt man Haftmittel?
@christianryser34202 жыл бұрын
Wo kann man diese Räder kaufen?
@kinovara78813 жыл бұрын
Hi, thats nice driving. Please, what pinion/gear and motor are installed?.
@maxgotzl43492 жыл бұрын
Hi, I am still using 23t/78t (pinion/spur gear) with a 6,5T motor, that seems to be the optimal setup for most carpet tracks for me. ;)
@avgguyfixingstuff49392 жыл бұрын
Excellent driving, would you share any of your setup specs? caster camber etc f/r
@shanepond64333 жыл бұрын
Do these need a sauce to work?
@extec1017 ай бұрын
no no sauce needed.
@shanepond64333 жыл бұрын
Do these need a sauce compound to work properly
@extec1017 ай бұрын
no they work great just as is and most of the time got a longer runntime then regular rubber tires like cactus. just that the pinion sometimes need to be changed a tooth up or down to keep the rollout as tires get worn out.
@danielgro49663 жыл бұрын
I just got my self a set of buggy foam tires. I am currently trying to figure out if the tire in the front needs to be wide ore narrow. How are you running it? I am not able to figure it out from the video.
@extec1017 ай бұрын
in front use wide rims for the foams and for me i prefere to grind down the inner ribbs on the rim both front and back as well as the innerside shoulder of the rim (leave the outside edge to protect tires from hitting track markers) to max out the wideness of the tire and make the inside part of the tire to be more in contact with the ground rather then during heavy loading tuck he tires and start to ride on the edge of the rim.
@mrtgeary82683 жыл бұрын
👍🏻
@stanislavkozak28063 жыл бұрын
Najs!!!!
@kvidoklikar56683 жыл бұрын
First!!!!
@tomassochurek89593 жыл бұрын
Mega dobrý 🤟
@stanislavkozak28063 жыл бұрын
Nádhera! Dávám odběr.
@karelnovotny23873 жыл бұрын
How fast does it go?
@maxgotzlrc22663 жыл бұрын
It goes very very very fast. It could hurt if it hits you 😵