Ryex Services

Пікірлер

@PamelaSchroeder-r7m Жыл бұрын

Those hydraulic lines are the perfect length, do you know what they measure?

@RyexServices Жыл бұрын

I don’t know off the top of my head. I would have to measure and get back to you.

@PamelaSchroeder-r7m Жыл бұрын

Thank you!!!!! Unless you order a specific size, Rut sends you 8' hoses as you know. Your hoses are perfect for the 306.

@aaronspurling Жыл бұрын

You know, this might be weird of me, but I find something strangely satisfying about watching this.

@Hardball-74 Жыл бұрын

Thought this guy was going to go to work

@kevinw8523 Жыл бұрын

How much do you charge an hour for that service?

@martinkapusnik2970 2 жыл бұрын

A year or so later, have you used the cutter much more? Wondering if you'd still recommend one. Thanks.

@RyexServices 2 жыл бұрын

Yes, I still use it and its held up well. I would recommend the cutter even though I also have a forestry mower as well for my 306. The Rut cutter is mostly use for thick grass and briars or honey suckle type of vegetation.

@martinkapusnik2970 2 жыл бұрын

@@RyexServices great, thanks for the reply.

@WeGoOutdoors 2 жыл бұрын

We currently have a John Deere 50G that we purchased new. At 420 hours it has been a phenomenal machine. No issues what do ever. I also like the CAT products. Looking at a new 306, but the 5 ton series seems to be that sweet spot for easy moving, getting into tight places like woods roads etc. We have a F550 and gooseneck so moving it really isn’t an issue. Just curious if you thought going to a 306 over the 305 was really worth the jump? It’s such a toss up. One thing I realized is you can only get the comfy air seat in the 306 line. They don’t offer the air seat in the 305. Anyone that’s popped stumps with these minis knows they can be a little bumpy on the back and bum. That air seat should take a lot of the bull riding out.

@RyexServices 2 жыл бұрын

The John Deere 50 and 60G are both nice machines and I was fortunate enough to run a forestry mower on a JD 60G before I purchased anything. I almost purchased a 305.5, but at the last minute I was able to demo a 306 and to me it was no comparison between the 305.5 and 306. The 306 has much more compatibility than the 305.5 after running both. To me the 306 is just small enough to get into small places and maneuver as well as not cause great transportation issues. I pull mine with a 550 and a triple axle trailer, and can get it into driveways without much issue typically.

@ghostofcato3052 2 жыл бұрын

Good video. The music is annoying as FUCK!!

@arlingtonguy54 2 жыл бұрын

I just ordered the RUT 36” brush mower for my 3.5 ton mini ex. What did you adjust for better hydraulic flow?

@RyexServices 2 жыл бұрын

The 306 has good flow already. I actually needed to turn down the flow going to the cutter, because the machine puts out more than the bush hogs maximum flow capacity. Which I can adjust on the monitor in the cab of the machine.

@VTOutdoorServices 2 жыл бұрын

Lol did you just show us how impressive it is pinching off a dead stub? Lol just busting balls

@jayroandrade2617 3 жыл бұрын

Price?

@RyexServices 3 жыл бұрын

I’m sure the price has changed now. But about $85k.

@charleslloyd4253 3 жыл бұрын

Personally. I would rather have a laborer with a story pole and laser, Than spend money on more electronics. I see so many machines not out there paying for themselves. While sitting idle waiting for a $500 to $5,000 dollar sensor.

@523FILMS 3 жыл бұрын

Cats fucking junk

@mikeskinner1324 3 жыл бұрын

I have a 289D with same mulcher, just took it into my bush to knock over dead widow maker trees, it my favorite attachment to use.

@johnkeelan9685 3 жыл бұрын

Whats the squealing when you re-start the mower? Alos, Ive been looking at this model for forestry mulching. How well do you like this machine & how well does it handle the mulcher & boom & stick functions while mulching? Can you run your thumb with the mulcher?

@travisteeter5072 3 жыл бұрын

That's what Russian olive needs. Keep it up!!

@kwlincoln 3 жыл бұрын

You don't want to leave roots is you are building anything over the spot. Especially roads or foundations.

@grade-aland2388 3 жыл бұрын

Have the same cutter but in 36in. Great cutter for the price.

@markronck3415 3 жыл бұрын

What type of mowing a attachment is that on the front of your Cat? I have friends that work in MGMT. with CAT? My son in law working on land moving equipment here in the DFW area and am using him to clear land like this in southeastern Oklahoma on the families new addition.

@callenomari1403 3 жыл бұрын

you prolly dont care at all but does any of you know of a tool to get back into an instagram account..? I was stupid lost my password. I would appreciate any assistance you can offer me!

@everettkarter5716 3 жыл бұрын

@Callen Omari Instablaster ;)

@callenomari1403 3 жыл бұрын

@Everett Karter Thanks for your reply. I got to the site through google and im in the hacking process atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.

@callenomari1403 3 жыл бұрын

@Everett Karter HOLY **** IT REALLY WORKED :O Just got access to my instagram account after roughly 30 minutes by using the site. I had to pay 15 bucks but definitely worth it =) Thank you so much you really help me out !

@everettkarter5716 3 жыл бұрын

@Callen Omari you are welcome xD

@kennybates6216 3 жыл бұрын

Does your skid steer get warm running that with no hydraulic cooler? How long can you go on a tank of fuel?

@RyexServices 3 жыл бұрын

No, I doesn’t get hot, even in July or August. I’m sure those machines with a cooler on top do run cooler fluid temperatures though. I use about 4.5-5 gal per hour, with a 32 gallon fuel tank.

@heavenbound1536 3 жыл бұрын

Are you happy with it ?

@RyexServices 3 жыл бұрын

Yes, it’s been a good addition, very happy with it.

@heavenbound1536 3 жыл бұрын

@@RyexServices thank you for the response May I ask how much $ ?

@RyexServices 3 жыл бұрын

@@heavenbound1536 no problem. I’d have to look it up for an exact figure, but it was around $10k.

@wpog8453 3 жыл бұрын

@@RyexServices you may have figured it out by now but its made to lead in with the other side of the wheel (downward direction). Much better cutting

@aureliacalota1572 3 жыл бұрын

🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🎃👯🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🐎🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃(TT)O:-)(TT):-$:-(:-|O:-):-):-*:-|:-$:-):-*:O=_=:-$:-):-|O:-):-!:-*:-|O:-):-!:-(:-|O:-):-!:-(:O=_=:-$:-!(TT)O:-):-!;-)🎖️=_=(+_+):-!(TT):-$:-(:-|:-!:-(=_=:-$:-(:-*O:-):-!:-D(TT):-\:-D:-|:-\🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃:'(O:-):'(=_=:-\:'((+_+):-!:-*=_=:-!:-*:-|:-$:-):-*=_=:-$:-((TT):-$:-):-|=_=:-$

@mikewersching1313 3 жыл бұрын

Nice! What size cutter was this?

@RyexServices 3 жыл бұрын

It’s a 42”.

@scogginsatc461 3 жыл бұрын

Do you have to shut down the cutter to track forward?

@RyexServices 3 жыл бұрын

@@scogginsatc461 no, it still tracks forward and backward. Although it is slower than if you were not running the cutter. Also, the boom and stick moves up very well while running the cutter as well.

@scogginsatc461 3 жыл бұрын

@@RyexServices can I Facebook message you? It’s a little easier than KZbin for me.

@RyexServices 3 жыл бұрын

@@scogginsatc461 yes, you can.

@dustybottoms3834 3 жыл бұрын

It’s 4am and can’t sleep. Ran across this video. I’m in southern Cali and know exactly where this video was shot. My aunt and uncle knew the people that built this house. Lol small world. Great video and info

@ranchertrapperdieselbuilds3632 3 жыл бұрын

I like the stick steer for tramming easy ground but were In the mountains we pull/lift and move ourselves around to much and it obviously kills part of your boom controls so that wouldn't work but it's a good idea I cant wait to get ahold of one I currently have a 305 and a 85g johndeere that's about like a 309 I've been favoring the deere alot sense it's been turned up

@RyexServices 3 жыл бұрын

We don't have any mountains in Indiana, steep hills are about it. One thing I didn't explain very well in the video, doesn't lose boom controls while in stick steer mode, it transfers to the roller switch and buttons on the joystick. Definitely not as intuitive to use at first, but I have found it very handy. However, no doubt there are still situations were I need to operate the boom and foot controls because I have more experience and comfort in that mode during those situations, but it's nice to have both options. it is especially nice for easy terrain travel or long distance travel. I've ran the 85G and 60G and there're nice machines, but I still like the CAT stuff just a little better.

@Olliegunns 3 жыл бұрын

Great explanation of how stick steer works. I wondered if you could still slew while in stick steer mode, and now I know you can!

@cailynnglisson4906 3 жыл бұрын

This looks like a handy and neat attachment.

@simpleman4196 3 жыл бұрын

Questions for you how wide is the small bucket you have. Iam looking at this same machine with a thumb and I would like to dig footings with a 12" bucket how wide is the thumb?

@RyexServices 3 жыл бұрын

The small bucket is a 12”, but the thumb pins are wider than 12”. So, when digging deeper than 18” or so, it will hit the sides of the trench.

@simpleman4196 3 жыл бұрын

@@RyexServices thanks for letting me know I figured the thumb would hit. Guess I'll have to take the thumb off when I want to use a 12" bucket

@RyexServices 3 жыл бұрын

@@simpleman4196 you may look at Krypto claw buckets and forgo the thumb completely. That can be a pain to take the thumb off and on.

@justingibson8092 3 жыл бұрын

any tips on to. run that i have to clear. 5 miles for a pipeline never ran. a mulching head before

@zouheir70 4 жыл бұрын

Hi Love this machine i will buy next couple months

@paulperrea824 4 жыл бұрын

How many acres is that? How long does it take for 1 acre of that!

@RyexServices 4 жыл бұрын

The property was a total of 10-11 acres and I cleared 1 acre in about 2 hrs.

@paulperrea824 4 жыл бұрын

@@RyexServices Does it take a lot longer if it is mildly hill? (My Dad has 20 acres, and he is getting older, thinking it might be a nice gift).

@RyexServices 4 жыл бұрын

@@paulperrea824 not necessarily a lot longer, but terrain and density of the material, definitely has a bearing on speed.

@Carnage6.0L 4 жыл бұрын

What kind of tractor is that? Brand, model

@RyexServices 4 жыл бұрын

It is a John Deere TLB 110. Its a great machine for its size, sadly they don't make it anymore.

@littlefinkle7757 4 жыл бұрын

306 is great! I have one now for about 3 months. It is awesome! I have the quick coupler. Strong and smooth machine. Pull it with my F350 with ease. Got a ripper for mine, makes clearing trees very easy!

@RyexServices 4 жыл бұрын

I’ve considered adding a ripper, maybe I’ll get one this year. I’ve been using a 3’ bucket quite a bit, has been handling it very well. I also added a forestry mower recently. I’ll have a video coming out soon on both.

@rontopping2048 4 жыл бұрын

303.5 to 305 needs cab redesign like this

@Grubbtree 4 жыл бұрын

Thanks

@Grubbtree 4 жыл бұрын

I've got the 306 and the 299 also. Please make more videos. You guys do a really nice job. Working on making my team more effective. Tips and tricks would be cool to see.

@stedder8436 4 жыл бұрын

Just found your channel. I have equipment videos as well if you’re interested. I subbed!

@trinitylandscapingandexcav7965 4 жыл бұрын

It’s a great machine! We love our 306. So glad cat came out with it because we were not impressed with the 305.5. We put a tilt rotator on ours and it’s unbelievable with it can do. Great video!