Love that song. Always reminds of 80s Miami and cocaine.
@redrightreturn108513 күн бұрын
@@trxntroll843 yes! Right on 🤣😎👍🏽
@McCatshot19 күн бұрын
Yeah, with RIDE, it's simple. What about for those that don't have RIDE?
@redrightreturn108519 күн бұрын
@@McCatshot as I showed, click into forward, move some, click into neutral and repeat
@McCatshot12 күн бұрын
@@redrightreturn1085 Wish I had a neutral.
@redrightreturn108512 күн бұрын
@@McCatshot you should. A quick snap of the left throttle puts mine in neutral
@jasonbourne3448Ай бұрын
If unscrew the white ground wire the backiing plate and lights slide out the bottom of housing. Makes it easier to changr bulbs without jamming your hand in there
@redrightreturn1085Ай бұрын
@@jasonbourne3448 ah, nice. I will try that way if this happens again👍🏽thanks
@PodchynokАй бұрын
How did it feel on machine, plenty of power?
@redrightreturn1085Ай бұрын
@@Podchynok oh ya, I didn’t even pin it because it was my kids first time on a tube on the wave runner so didn’t know what to expect but didn’t struggle at all👍🏽
@chokla3834Ай бұрын
can u use a funnel as a diy? i don’t have the attachment
@redrightreturn1085Ай бұрын
@@chokla3834 nope, it’s the right size and has a locking nipple that fits it the port. Order one if you bought used and the unit didn’t come with the attachment
@michaelstanton556Ай бұрын
Have same ski tr1 I smell gas even dad said was strong
@michaelstanton556Ай бұрын
I smell gas wtf
@redrightreturn1085Ай бұрын
@@michaelstanton556 gasoline or gas vapors? If vapors, always keep the seat off for ventilation. Or, take seat off for a few mins just prior to starting it on the water. The culprit is faulty wiring that ignites the vapor build up. Vapor build up is normal as the gas tank is also under the seat. The smell of raw gas in liquid form, means leaking gas. The big problem is if there’s any faulty wiring causing spark in the engine bay
@michaelstanton556Ай бұрын
@redrightreturn1085 Dad and I took the seat off tonight waited a little bit and I couldn't smellDad and I took the seat off tonight waited a little bit and I couldn't smell anything.
@redrightreturn1085Ай бұрын
@@michaelstanton556 yes it will always smell like gas vapors if the seat is left on, however, if all components inside the w home bar are not corroded etc, just vent the engine bay before starting, if you smell raw gas, like if you spilled it in the garage, then don’t start it and get it looked at. Most of the time the gas itself leaks from the fill nozzle from pushing the gas nozzle in to hard and breaking that seal inside, or, the top of the gas tank where that silver plate is (fuel pump) I definitely don’t want to cause alarm as your ski may be fine nuts build up of vapors
@michaelstanton556Ай бұрын
@@redrightreturn1085 ty
@Strangerthingsvehicles2 ай бұрын
I don't mean to sound like an asshole but everything you said in this video is wrong you really need to take it down redo it with the right information
@redrightreturn10852 ай бұрын
@@Strangerthingsvehicles list all that’s wrong. I’ve been changing oil in engines for years. An oil change is an oil change and in a wave runner you suck it out and still change the filter. I’m dying to hear the extreme list of wrong information I provided 🤦🏽♂️
@Strangerthingsvehicles2 ай бұрын
@@redrightreturn1085 for starters you were trying to drain the oil from the head not from the big yellow dipstick area then you try to suck oil from a PCV hose not the oil hose next to it
@redrightreturn10852 ай бұрын
@@Strangerthingsvehicles anyone who watches this video, in full, WILL successfully change the oil without incident in this unit. If you are referring to some of the trial and error that was done AND caught live, that’s still not wrong info. 1) the fogging oil is for winterizing the engine, and lubing components 2) i pointed out the flush, dipstick fill, and crankcase fill. 3) oil viscosity will break down faster with higher RPMs, 4) keeping the seat off is how you avoid mold building up in the hull.
@redrightreturn10852 ай бұрын
@@Strangerthingsvehicles you clearly had KZbin shorts attention span on this one. Skip a lot and miss a lot. Read my response and watch it again. Nothing was wrong information just some trial and error caught live and still done successfully
@alanshaw46552 ай бұрын
heads up: do not beach the ski on any sand bar !, this will ruin the haul, which brings the re-sale value down if you decide to sell or trade it in ?. get your hands on an anchor with a short rope, stay about 2-3 feet off the sand bar. drop the anchor there. also...never, ever..start the ski in less than 2 ft of water ?, you will suck up sand, rocks into the intake, will be a bad day then..lol.
@centralcal66042 ай бұрын
I was surprised the other day mines hit 50mph I. Happy with that
@redrightreturn10852 ай бұрын
@@centralcal6604 oh ya! Water conditions and weight play a huge part. Mine normally does 51 on light chop with just 180lb me. 55 had to be glass water, me only, and a half tank 🤣👍🏽
@centralcal66042 ай бұрын
Whatsthe too speed on a good day on the vx cruiser
@redrightreturn10852 ай бұрын
@@centralcal6604 glass water, just 180 lb me, 1/2 tank of gas =55 mph
@centralcal66042 ай бұрын
@@redrightreturn1085 seems about right mines tops out at about 50
@redrightreturn10852 ай бұрын
@@centralcal6604 that’s plenty for me🤣👍🏽
@centralcal66042 ай бұрын
Appreciate the video and the humor
@redrightreturn10852 ай бұрын
@@centralcal6604 appreciate it 😎👍🏽
@NoPrxssure2 ай бұрын
I’m confused two years and only 21 hours?
@redrightreturn10852 ай бұрын
@@NoPrxssure ya…. I know 🤣 I mainly drive it out to a fishing spot, fish for a few hours anchored, then wide open throttle it around the lake and go home. Not much long trip adventures……. Yet😎
@alanshaw46552 ай бұрын
nothing odd to me about it ?, my '15 fx ho cruiser only has about 25-30 hrs tops ?. i stay busy alot, not much time to ride, summers are when i am busy the most.
@andysangels19702 ай бұрын
I wish! In Georgia we have to have one driving one watching and the me tubing you can’t drive and watch idk why
@redrightreturn10852 ай бұрын
@@andysangels1970 yes, definitely hard to do all👍🏽🤣
@alanshaw46552 ай бұрын
most states require to have driver, spotter when you are pulling someone on a tube, no idea why these ski owners don't know the law..oh well..lol.
@alanshaw46552 ай бұрын
@@redrightreturn1085 you are '' suppose '' to have a spotter while pulling a tube or skier at all times in most states. reason: this lets the driver watch where they are going ?, and the spotter can tell the driver the person being pulled has went down, safety reasons !.
@redrightreturn10852 ай бұрын
@@alanshaw4655 didn’t know that. I am grandfathered in to not have a boater safety cert, however, I watched one on KZbin that covered floatation devices, markers, water, safety and “rules of the road” and nothing covered spotters for pulling but thanks for the insight
@andysangels19702 ай бұрын
@@redrightreturn1085 also your ski must fit everyone. If you have a 3 seater you can’t have a driver and 2 people on tube the one on the tube needs to fit on the ski you can’t be over capacity
@alanshaw46552 ай бұрын
you do not need a 4wd to launch a jetski. i will agree with the car part..yeah..just don't..lol. i never beach my ski on any sand, nor do i let it get near any rocks.
@redrightreturn10852 ай бұрын
@@alanshaw4655 I don’t know on the non 4x4 thing😬 I always see front wheel drive vans/SUV’s or rear wheel drive trucks spin and roast tires on the ramp every time I go out. One Titan that was 2 wheel drive had to let the boat go and pull out while I hooked up his trailer and pulled his boat out in 4x4. It’s possible but darn risk😬
@alanshaw46552 ай бұрын
@@redrightreturn1085 lol, well, my 2wd , reg cab silverado handles boat launches just fine. here's a tip..don't back way the heck down in the water !. sounds like to me, these folks don't know how to drive huh ?..lol.
@redrightreturn10852 ай бұрын
@@alanshaw4655 most don’t but these ramps are on such an angle to where the trailer wheels get half submerged depending on the water levels which is always, rear wheels in the water . 😎
@anthonydevoe60502 ай бұрын
I just replaced the impeller and we’re ring and it’s only going 47 any idea
@redrightreturn10852 ай бұрын
@@anthonydevoe6050 geez. I do know those wear rings are exactly that, “wear” like break pads, but I thought that was after maybe a few years and in salt water
@brandonj74403 ай бұрын
My goal is not to get wet when getting my waverunner off the trailer lol
@alanshaw46552 ай бұрын
lol..isn't the whole reason to ride a jet ski is to get wet ?, i mean...you are going to be on the water...sooo....GET WET !...LOL.
@automan12233 ай бұрын
I got the HO model & while it's a blast I believe that the 3 cylinder is more than enough. after 40 mph you are flying !! Unless the water is smooth you are limited from 30-45. I do not know if the 3 cylinder could tow an inflatable though I would imagine it could.
@redrightreturn10853 ай бұрын
I actually tow a Slice inflatable to pull the kids on. Works just fine and doesn’t seem stressed👍🏽😎
@ZLUVCRUCE3 ай бұрын
My VX with the tr1 went 63
@redrightreturn10853 ай бұрын
Nice! 55 on 1/4 tank and by myself is the best mine ever did. Is yours the 4cyl? Mine is the 1049 cc 3 cyl
@markramirez30903 ай бұрын
Is this the tr1 or 1900cc
@redrightreturn10853 ай бұрын
Yes, the TR1 1050cc
@cresenthammergarage3 ай бұрын
Watching this show after all these years, yep, just as stupid as it was then
@andysanders9563 ай бұрын
Loved Miami Vice
@danehall88183 ай бұрын
Man that is some extremely fast readjustments, and I don't recall ever hearing a motar whistle.
@harrybaulz6663 ай бұрын
and i used to watch stupid stuff like this
@user-id8im8nm5x3 ай бұрын
Old TV was so lame
@mr.joseph78063 ай бұрын
Is that incoming or outgoing? INCOMING!!!!😮
@FreshlySnipes3 ай бұрын
That is the fastest mortar adjustment in history
@gonzalocruz24903 ай бұрын
Is it normal if the exhaust starts steaming ??
@redrightreturn10853 ай бұрын
Yes, that is the actual exhaust smoke😎👍🏽
@JK-ei6uw4 ай бұрын
The red lense does come off. You have to use a screw driver to pry it off. It's not easy because dirt and corrosion makes it stick together, but it does come right off the black plastic backing. Then of course it's easy to change the bulbs.
@redrightreturn10854 ай бұрын
Oh ya, I got motivated the next time and found that out 🤣🤦🏽♂️
@Bonsai-Miata20204 ай бұрын
I wait till no one is looking. Then dock.
@redrightreturn10854 ай бұрын
🤣👍🏽
@scotthooper4170Ай бұрын
😂😂😂 That Always a good plan! 😂
@redrightreturn1085Ай бұрын
@@scotthooper4170 🤣👍🏽
@AndyHosmer-zu5jf4 ай бұрын
My manual says to grease the intermediate housing, I can’t find the grease nipple. Just curious if you found a way to grease the bearing?
@redrightreturn10854 ай бұрын
And the manual doesn’t show an image or location of the grease fitting? Thats odd, now I’m going to check my manual. Usually, grease fittings are for ball joints for cars to keep them greased but ya got me on that one.
@StarWarNerd5 ай бұрын
Bought brand new waverunner went to break it in , didn’t do any fully throttling just cruising , after a couple hours heading back to the dock when in idle smoke coming out from under but when you hit the gas a little it’s stops and come back when you let off . Is that normal ?
@redrightreturn10855 ай бұрын
That’s just exhaust smoke. You will see it when you flush the engine in your driveway with the hose and engine flush nipple. Now, when you say “from under” does that mean from the step area in the back, under the seats, or under the hull that sits in the water? If coming from the back of the wave runner, that’s the exhaust.
@jeffbryner53557 ай бұрын
Welp im out! If you can stand on it without falling off the fun factor is gone for me! 😂
@redrightreturn10857 ай бұрын
🤣👍🏽
@jctriay57437 ай бұрын
Thank you for teaching me 🙏👍
@redrightreturn10857 ай бұрын
Happy to help
@vinnitca19907 ай бұрын
I Don't think one minut is enugh !
@redrightreturn10857 ай бұрын
Even for fresh water? This was after being on the lake not salt water
@ryanp69998 ай бұрын
I have to correct you on something. The term “jet ski” is trademarked by Kawasaki (similar as to how Yamaha terms theirs ‘Waverunner’”.
@redrightreturn10858 ай бұрын
I’ve been schooled on this a few times since I made this 🤣👍🏽
@ryanp69998 ай бұрын
Hey, you didn’t HAVE to make this video- but you did and I’m glad. I certainly appreciate the helpful tips. New jet ski owner and I’ve never launched by myself before.
@redrightreturn10858 ай бұрын
We all have to learn somehow, as did I with KZbin videos👍🏽 thanks for the comment.
@freeskier1759 ай бұрын
Hope you got pizza after
@redrightreturn10859 ай бұрын
🤣👍🏽
@pinecone7610 ай бұрын
Hello! Have you had the recall performed? I’m wondering if the pics you’re showing (at 1:54) are before or after the recall has been done? I got a used 2022 unit just a few weeks ago and cannot confirm if the previous owner took care of the recall. According to the official recall notice, the tech is supposed to mark a letter F on the label inside the hull. Mine does not have it but what if they forgot to mark it. Thanks for any insight you can provide!
@redrightreturn108510 ай бұрын
The TSB I am not sure of, however, I do know shoving the gas nozzle in to hard will compromise that seal, and, the gasket between the gas tank and round metal ring at this point in the video are known for the gas leak. You will smell gasoline, not vapors and it’s not a lot of units effected
@nolanchatalas506410 ай бұрын
This is the worst designed cover in existence. Impossible to put on
@redrightreturn108510 ай бұрын
Yes, there was lots of swearing my first go around with it 🤣👍🏽
@keithdarman9010 ай бұрын
What are the odds. I’m in NC too!
@puscifer03dude5211 ай бұрын
Anchor to the cleats ?
@redrightreturn108510 ай бұрын
Noooooooooooooo…. The anchor is secured to the front winch hook, then, that clip bungee is clipped to the rope on one side and to the cleat of the wave runner on the other side. This way, I can just pull the bungee to bring the anchor rope close to me to grab it and pull the anchor in. I wouldn’t anchor to the cleat 🤣👍🏽
@puscifer03dude5210 ай бұрын
@@redrightreturn1085 ah I see what you mean. If you anchor to the cleats you can just pull it straight up still lol
@redrightreturn108510 ай бұрын
@@puscifer03dude52 true, but I’ve heard anchoring to the stern, starboard or port side will lead to water logging in the event there are swells. 👍🏽
@puscifer03dude5210 ай бұрын
@@redrightreturn1085 where do you jet ski at bro.
@redrightreturn108510 ай бұрын
@@puscifer03dude52 mainly Jordan Lake and Norman Lake, but just haven’t had the opportunity to get it to Kure Beach Fort Fisher yet. Usually we go as a family and there’s too many sand bars on the beach, so I will have to go alone or with one other person. 👍🏽
@Reljic41411 ай бұрын
Man do not get me wrong but you need good microphone and u will get more subs
@redrightreturn108511 ай бұрын
I’m sure you’re right. Sometimes these phones change volume, or get washed out by other sounds. I keep seeing people with these little fuzzy mics on their shirt. Going to look into that.
@jstone121111 ай бұрын
It has been a year since launching and loading my VX. Around the dock is where you can beat the crap out of the ski. I use bumper guards when tyin the ski to the dock. In bumpy weather or waves you need the guards big time.
@kineticenergy108511 ай бұрын
Ya…. Especially when morons are hammer down going by the docks creating tsunami’s🤣👍🏽
@danav338711 ай бұрын
Plastic things on the side = Sponsons. Carpet things under the waverunner = Bunks.. Glad you're all ok. Yea in the past I have beat my fzr hull up al little, it holds up pretty good. CCW laws are archaic but also different in different states.
@redrightreturn108511 ай бұрын
Ah, yes, thanks for the proper identification
@tnrodgers Жыл бұрын
You did good.
@tunemaking Жыл бұрын
Its simple to just place a low wattage heater stick inside the engine compartment over the winter, or if you aren’t going to use it for some time. I do this every winter and it works great. I also don’t have to worry about critters, as the seat will close even with an extension cord.
@redrightreturn1085 Жыл бұрын
Sounds like it works, but I’d be too nervous that having a heating element where gas fumes collect may not fair well. 😬
@bope08 Жыл бұрын
We want pizza
@philipcarter1143 Жыл бұрын
Does punching a hole in the oil filter really help? Before I even finished unscrewing mine, it made a mess
@redrightreturn1085 Жыл бұрын
Take a punch, or screwdriver or ice pic etc and punch a hole in the top of the oil filter, AND unscrew the crank case fill on top right where your coil packs for your spark plugs are😎👍🏽
@justindixon5012 Жыл бұрын
How do you like the tr1 engine. Do you wish you would have got the 1.8 liter? Are you happy with the fuel consumption on the tr1?
@redrightreturn1085 Жыл бұрын
The 1.8, sure, I guess now that I’ve had this for a year, but 52 MPH is fast enough for me on a wave runner. It’s definitely great on gas. I run it for a few hours each time, some WOT, some cruising and after the 3-4th time it will need gas👍🏽