Thank you

I appreciated this video!!

is this a synthetic cover or genuine leather? Looks great!

My power seat switch is broken and won’t go forward. I can’t get to the bolts. Is there a way to manually move the seat forward?

Thank you, very clear, thanks

Best and most comprehensive video available to do this job. Thank you! T40 Torx, 10mm socket, and a large Phillips screwdriver required to remove. No need to remove seats; just slide back and recline them back.

I know im way late to this but this just helped me greatly on my old school!

I just bought a used 2012 RZR 570 and was damn nervous when I went through it when I got it home and found 5 spark plugs in a bag! This hopefully explains it, as the farmers little girl (supposedly) is the one who drove it. Thank you.

My 2018 Polaris Ranger 900 only has 40 hours on it. It was inconceivable to me that the spark plugs would not be working after only 40 hours of very light use. My ranger would turn over and die immediately. Sometimes after attempting to start I wouldn't get any lights on the dash. Charged the battery then the ranger would turn over but not start. Replaced fuel pump. Same thing. Replaced the spark plugs and the ranger fired right. Thanks for this video. I wish I would have found it first thing.

Great video answered all the questions I had. I'm going to your site right now too order me a cover. Thanks so much for the info and the great video and products. GOD Bless you and yours my friend.

Bro thank you for the vid.I love my lil work truck and throwing some subs in it. I would not known how to take em out with out ya 😂

How do you remove the lids off the MDX?

I was thinking that I was about to spend a lot of money fixing all kinds of things on my 2019 Polaris 900 XP Ranger, thanks to your advice I only spent $20.00 dollars on 2 new spark plugs and it started right up! Thank you again!!!

November, 2023. 2010 800 XP. After plowing or first snow, I noticed it had half the power it should’ve. Installed a new drive belt, nothing. Then a new fuel pump, no change. Then I replaced the fuel injectors, now it wouldn’t start. Put the old ones back in, nothing. Fuel pressure good, the plugs spark, full tank of clean gas, air filters cleanish, battery fresh and turns it over fine, fuses checked out fine. Now it’s late February 2024. Came across this video, and even though my plugs appeared to have a healthy spark, I headed into town and picked up a new pair of copper spark plugs. Wouldn’t you know it, it fired right up. Thank god for climate change or global warming, or I would’ve had to hire someone to plow my driveway the last two and half months, and thanks for sharing your video with us.

Heed his advice on getting the right gloves to protect you hands from the sharp edges of the stamped sheet metal in the seats. best $8 I've spent lately...

Wolfman's Auto and Cycle Seats - awesome craft. just finished installing the first of two seats for the series 100 Land Cruiser. Watch his videos. And then some on hog ring plyer technique. Missed two wires on the first seat. Pretty good for a first run... Top quality pattern and fit. Wonderful customer service. Ask him to make you something not on the menu. He'll nail it. Great to be working with them.

You've have the best video on replacing this. Thanks

What glue should I use?

I'm not able to find a replacement rear seat for my 08 highlander, can i use one from a 1st generation?

I bought your product and did this. First time ever doing anything like this. Your video made it almost easy! And the quality of your covers are the best I’ve seen. My seats look better than new.

How come no one shows how to take that console out of the truck?

Do you have a video about how how to break the seat down. I just tried to do it, and I couldn’t get the plastic backing off the back of the driver seat. Please let me know. Thank you!!

Great video. Taking the old cover off needs a video in itself. I removed the bucket just to get the fabric clips removed. Now I have a bucket that doesn’t sit in the hole. 😂 going to try and glue it down and go from there. Thanks for the video, because the “instructional video” for these covers are a joke.

Just the video I was looking for, thanks a million. Really gave me the idea of how to proceed.

I can put this in a Highlander 2021

my driver's leather seat is looking close to bad but not horrible in the usual outboard bolster area - not in need of complete replacement. since about 95% of the time for the life (thus far) of my '03 highlander, only the driver seat was occupied and thus there is very little wear on the passenger seat; can i simply swap the driver and passenger seat+heater+cushion? they look identical from what i can see in your very well-done video. thx much, km

Thanks for this video

Very useful and straightforward

can u pls tell me the contact cement tht you have used

Wtf .... I really wish this was my issue.. tried that first. Honestly I don't believe I've ever in my life had a solution that simple.. I hate all you guys in the comments!!! Lol..

Thanks so much for posting this. I needed to replace the seat cushion pad and your excellent video made the job a breeze.

Looks like the seat has to be removed. Is there a video for that

Hello good morning, i like your work and I want to work with you

Nice video. Full of good info.

Did you stop selling these center armrest replacements? I don't see them on your website anymore.

Where did you get the new cover from ?

Looks great. When you glue the top of thr leather to the top of the substrate, you mentioned only glueing the edges which makes sense. In order for contact cement to work, you need the cement on the leather and the substrate, right?

Thanks alot man

Hi, I bought a bottom seat cover for my LX470. It came with some kind of "cord" where the wire it's supposed to go. Do I use that to clamp my hug clips down to the seat frame or do I discard them use/ insert my old wires from the old cover? Thanks

Please provide the link for Part 1

Wolfman, great video. I removed the driver’s seat on my 2016 Chev Silverado High Country 3500HD following your instructions. Thank you for taking my telephone call yesterday before I started working on my truck. I needed to remove and repair the seat because the backrest reclining function wasn’t working. At the end of the day I removed the seat, repaired the reclining feature and reinstalled the seat. My Chevy dealership wanted $140 just to diagnose the problem, instead with the help of Wolfman’s video I tackled the job myself and spent zero dollars fixing the seat.

Can you make a video on how to remove the console??

Do you have colors that match my 2018 tundra? I have ash graphite color.

SO informative! Been wondering how to get the big bottom trim piece off to better connect my seat covers.

Do you still have some in stock? Looks really good.

That was a very helpful video

Imagine being an engineer and designing this.... good grief. 😵‍💫

You mentioned that the vinyl has a limited stretch and will stretch more if you heat it up-how do you suggest heating the vinyl?

Great video, up until it cut off! Where can I get the rest??

Can I order for my 4Runner