I would love to see what the process would be if you didn’t have the laser to remove the paint ie mask and paint. I always end up hand paining flags but trial and error getting everything to look smooth.

Do you use the same feed/speed for both bits and your plunge is set higher than I’ve seen compared to feed rate just curious if those are your final settings if so I need to up some shit

Step one. Buy a CNC machine.

How long did the laser part take?

How can I get the stl file of the flag? Nice job thanks

How can I get the stl file of the flag? Nice job thanks

Am i seeing that right. Is that baltic birch plywood?

What type of engraving machine do you use thanks

Just signed up for a year membership. You guys have some amazing stuff and should make some more videos. Guys like me are proud to support what you guys are doing luckily I stumbled onto this video.

On my onefinity, using vcarve laser module, if I try to engracd the whole flag at one go, it loses steps and will medd up the whole burn. I'm having to break it into like 6 smaller sections and burn it piece by piece. Any suggestions on how to stop losing steps?

I havent tried yet but when you overlay the 2nd file over the flag... does it automatically contour to the 1st file (flag)?

Nice job but i really can understand how you managed to laser engrave on a 3D model! can you please explain?

I was curious if I would be able to use the laser to help out some of the portraits that I do for people. I was going to try this anyway, but I am glad that I run across your video. I have been doing the 2.5d portraits for a while now and I was given a very nice 100w C02 laser. I was pondering about combining the two. You have given me the extra push to experiment sooner. Everyone says that I should quit my job now and do my artwork full time. I won't do that but I will try this now. Thanks.

What machine do you use

What type of CNC bit did you use? I know you said 1.5mm but length, size of shank? Do you have a link to where we can purchase this but? Thanks

Amazing work. Can I ask what laser you are using?

Taylor, can you tell me what bit you actually used to make the 3d carving?

Awesome work, can you combine two stl's like you did, in vcarve pro instead of aspire?

Beautiful!

Masterpiece!

Im still trying to figure out how you made the Stars and stripes image follow the contour and topography of the 3D model you had in Aspire. Especially how the stars in the upper left corner look so realistic.

Just subscribed and hoping for more tutorials, just out of interest what enamel finish do you use, best wishes from the UK

Intrested in ordering a custom piece please message me.

Nice

hello, I'm building my CNC Router, very cool your work, what software are you using

Dude I love the flags. I followed your tutorial for the Viking flag and set it all up in Aspire and can't wait to get through some of the projects I have backlogged so I can give it a try. I appreciate you taking the time to make these tutorials. I'm eagerly awaiting your video about the jig setup for the laser. Thanks again for taking the time to share your knowledge.

If the 3D file is already built can you just import it if you only have Vcrave Pro?

Alright boys!! lets get this channel going has a great how to channel. Do Vcarve too!! Would love to see the painting then lasering tutorial on here. Great work!

i love this one.can you do wood flag for me?

Any thought on how to do this without the laser?

Just joined your site as a pro monthly. About to make one of these for a silent auction. Just gotta figure out what I will do since I don't have a laser for my CNC. Great work keep it up! I'm trying to get more advanced as quickly as I can. May have to invest in a laser sooner than I was planning to.

The only aspect I can't figure out is how to get the crackles look on the black. How is that specific look achieved. I was able to do everything else. Is the crackle part of the vector I am missing?

That is awesome. I just picked up a CO2 laser (130W tube) last week. Still trying to figure out settings to be able to remove paint. Really struggling with correct settings to be able to do something like this, i.e. for laser to remove paint without charring wood. But I would like to, it's impressive. Will need to go look at Patriot Nation. Thank you again.

Very nice work my friend 👍🙏

Wow very nice 🤙

What do you sell that flag piece for?? $150/$200/$250? It looks amazing and thank you for sharing.

Looks great, awesome work. You mentioned sanding in the video, are you sanding it by hand?

Nice work Taylor!!🔥

man this is un real..

When you say waste board what exactly does that mean?? I have a co2 and I am thinking like a board that you put under the project. I hadn't thought of that but it makes sense.

Do you have a draped Canadian flag vector on your site I couldn't find one? I'd like to do the same as this American one. Great work.

I never leave comments on anything but I will say this is bad ass. I think you just convinced me to buy a CNC machine instead of a laser cutter

Wait you raster in x and y at the same time ?

This is absolutely amazing! very cool stuff!

Is it possible to purchase an american flag from you?

+1 sub, membership prices are way to high for me. But ill prob buy a file or 2 i do like your flags. Thx for video was good. I only have Vcarve pro, got me really thinking about upgrading to aspire. But i do like the files you offer. happy new year.

🤭 P R O M O S M!!!

What were your carve and burn times?

Awesome it sucks I can’t make one without Aspire

Thank you