ChrisBuilt92

Пікірлер

@Outvid171 2 күн бұрын

good job. although i made the same mistake as in this video... Skipping the oil pump job. Did the whole similar build, got it driving great... only to take it apart shortly after to do the oil pump balance shaft delete.

@ChrisBuilt92 2 күн бұрын

Thanks! This was just a quick budget build that i had fun with. Never finished it, decided to change platforms

@ImWeezzel 3 күн бұрын

Question: are the interior chassis different besides the park/neutral plug? Had someone tell me I needed to get a Kpro to convert the car from auto to manual even if I was using a JDM k20a w/out mobilizer? I thought the chassis harness were the same from 96-98 auto and manual, difference would be the engine harness and ecu.

@ChrisBuilt92 3 күн бұрын

No you should be fine with the jdm ecu

@xanderwilson6570 23 күн бұрын

What brand of bucket seat mounts/rails did you use for a soarer? I can't find them for rhd

@ChrisBuilt92 23 күн бұрын

Lhd and rhd are exactly the same. Supra/soarer are the same seat rails. The brand was bride

@RettegettIvan1314 26 күн бұрын

Hi! I have some questions about the wireing, i followed you on Instagram

@ChrisBuilt92 24 күн бұрын

Which instagram? Should be chrisbuilt92

@attackticaltwitchtv3542 27 күн бұрын

Which transmission cross member and poly mount are you using?

@ChrisBuilt92 24 күн бұрын

The poly mount was for a 350z or 240sx i forget. The mount i dont remember

@Onedeepdrew 27 күн бұрын

Did you swap the spindles too? Everything I’ve read you need ex spindles for it to work as dx/lx spindles are too small for the caliper bracket

@ChrisBuilt92 24 күн бұрын

Yes i did

@jeromewalker5180 Ай бұрын

Thank you

@ImWeezzel Ай бұрын

Subscribed, you sir are the top G. Question, how’s the valex slave cylinder kit working for you? Still good? If so I’ll pick one up myself.

@ChrisBuilt92 Ай бұрын

Car has been sold for a while now. That kit worked well. No complaints

@jacobbaca8753 Ай бұрын

Hey where is this?

@ChrisBuilt92 Ай бұрын

New mexico

@jacobbaca8753 Ай бұрын

@ where in NM?

@ChrisBuilt92 Ай бұрын

Santa Teresa

@jacobbaca8753 Ай бұрын

@@ChrisBuilt92 thank you!

@DIRTYvinnieXD Ай бұрын

So this is no resonator?

@ChrisBuilt92 Ай бұрын

Straight pipe to an apexi muffler

@d.i.mdoitmyselfgarage8874 Ай бұрын

Is the struts from an egg too? Or is it ek struts with eg forks?

@ChrisBuilt92 Ай бұрын

Struts are the same

@d.i.mdoitmyselfgarage8874 Ай бұрын

Im doing a eg subframe swap, right now im strut trying to figure out what strut or strut fork i have. Fork fits to loose

@user-tn9rw8gu2k 2 ай бұрын

I was gifted one of these today and was curious about closing the hood? Any issues?

@ChrisBuilt92 2 ай бұрын

None at all

@jasonosaka 2 ай бұрын

Would this whole setup work on a jzx90?

@ChrisBuilt92 2 ай бұрын

Yes it would

@oceansidesam 3 ай бұрын

Where is 2nd video?

@ChrisBuilt92 3 ай бұрын

It was broken lol

@Rhino1926 3 ай бұрын

What bike is this please

@ChrisBuilt92 3 ай бұрын

Polaris scrambler 50

@Rhino1926 2 ай бұрын

@ChrisBuilt92 thank you

@MoMo-nz5yo 3 ай бұрын

Is there any way to unlock 5th gear on 4 wheel low on a 2004 4 runner v8? One of the local tuner tried but he couldn't backup the ecu software even though it was reading the software version

@leonelzarate1293 3 ай бұрын

looking for ac components for 92 Toyota soarer, part that connects to evaporator core under the hood. or a diagram

@danielneumann9633 16 күн бұрын

Amayama

@bonelesshappymeal 3 ай бұрын

Do you think this would work for a 2010 LS460?

@ChrisBuilt92 3 ай бұрын

Probably not

@kingoftheheckcholo3657 3 ай бұрын

So do just cut the pink wire? And for the switch do you connect one to the pink and one to the purple?

@ChrisBuilt92 3 ай бұрын

If you have a 1 jz powered car or similar you attach one end of pink to one side and other side of pink to the other side of the switch.

@KOClancy 3 ай бұрын

GREAT VIDEO ! Im about to install a mishimoto rad and fan in my Soarer and i was feeling a little stressed about running the trans cooler. But this video helps so much. Thanks

@ChrisBuilt92 3 ай бұрын

Glad I could help

@noahbell7297 4 ай бұрын

Did you ever have overheating issues with the half size ? I have one in a my jdm K24 EG and it seems to get hot very quickly. Advice

@ChrisBuilt92 4 ай бұрын

Never, and it saw 100+ weather here. Try bleeding your system

@damionrowe806 4 ай бұрын

What’s the name of the switch you bought and does it work on hybrids

@JCnordic2983 4 ай бұрын

How was street light driving with vtec killer?

@DanR32gtst 4 ай бұрын

Damn the screamer pipe on this thing sounds insane

@MonkeyWrenching 4 ай бұрын

The irony I’d find this video today 😂

@manny1782 5 ай бұрын

What cxracing manni are u using? And did it work for you?

@ChrisBuilt92 5 ай бұрын

Wasn’t cxracing, came from driftmotion

@DTuned559 5 ай бұрын

Hey any chance I could have that map u used for that idle u got it pretty good I need help

@ChrisBuilt92 5 ай бұрын

Just upload the factory one from Hondata

@DTuned559 5 ай бұрын

@@ChrisBuilt92 no worries I can’t get it to idle steady like yours was

@DeCeGuy 5 ай бұрын

Just wondering if changing from the factory electric seats to the recaros ended up throwing any codes?

@ChrisBuilt92 5 ай бұрын

No codes

@mbroth24 5 ай бұрын

Will this work on both dx n ex models? I have a 99 dx coupe

@ChrisBuilt92 5 ай бұрын

Yes, do what the video says and you’ll be good

@xyzebruh1083 5 ай бұрын

Use hairspray in all of your couplers and you’ll never have boost leaks there

@xtakeroflifex7957 5 ай бұрын

How did you clean the inside of the motor heads

@jordoncole3266 5 ай бұрын

How did you install the clutch pedal?

@HTown-Cee 6 ай бұрын

Do u sell ur oem spoiler?

@yesormaybeno 6 ай бұрын

Make one adjusted for inflation 😅

@mr.dal91 6 ай бұрын

hey Chris I have a 94 hatch Si non abs the spindles or knuckles are compatible with this calipers?

@luisvelez6177 6 ай бұрын

I got k20a3 rockets and cam assembly this will work or i need to get the rockest from a k24z3 thanks

@ChrisBuilt92 6 ай бұрын

Why would that work when i show you the other way to do it

@luisvelez6177 6 ай бұрын

I got the hole cam assembly from a k20z3 the I got from the junk yard so you think the I can used them thanks

@krishansalguero1477 7 ай бұрын

No issues with the injectors?

@geoffreyrebman6910 7 ай бұрын

Any idea how to do it for a jdm 3sgte with a manual transmission?

@andrejohnson1613 7 ай бұрын

My accord v6 was flying to 125mph and just stopping I was like wtf, how do I fix this shii

@kurser3228 7 ай бұрын

So you need an Engine harness and conversion harness only correct?

@ChrisBuilt92 7 ай бұрын

Yes

@galev900 7 ай бұрын

Do the turn signals work and turn off when you rotate the steering wheel?

@marktucker9724 8 ай бұрын

Would this work on a 2007 awd GS350?

@supermekaniko86 8 ай бұрын

Hey man I had the same issue on the passenger side did you notice the inside still too short or the the boot stretched out?

@ChrisBuilt92 8 ай бұрын

Never had an issue after replacing the axles

@mikestanley2560 8 ай бұрын

I have rota slips 15x6.5 +35 offset and the rub on the callipers. Do you know the wheel spacer thickness and length of the extended studs I need so the wheels clear?