My coil came in this week and I got around to hooking it up today. I noticed the purple awire to the Voes. Well the black wire that come out with it has been cut and MIA . I’m assuming it was part of the factory ignition. It’s OK if it’s gone?
@dannyolson5719Ай бұрын
man its been 3 years since meeting you. i was the kid in the brown vest with the hat. i just turned 18 a month ago and have a kid. i was like 14 in that video
@bretcappola6904Ай бұрын
That is a bad ass sporty bro, I hate when people call them girls bikes, they don’t know shit about Harley’s,it’s a shame the motor co. Destroyed the sporty
@UuelHempkin-qh4jfАй бұрын
What sportster is she lad 1200 or 883
@eaglemesa902Ай бұрын
Don't buy that shit. It's has problems. I know. They had me running around to fix this and that. They finally admitted it had issues. They are assholes and they continue to not fix it. Never again use that shit!!!!! N
@Parma.sean.162 ай бұрын
Do you have cable clutch or hydraulic?
@UuelHempkin-qh4jf3 ай бұрын
You still have the harley sportster whats with the smoke coming out the side of her
@reybruny3 ай бұрын
Nvr seen dat b4?!?!?!? Very kool!!!!
@georgeveysey18733 ай бұрын
What gear are you in second
@sethw17214 ай бұрын
Hey red light doesn’t flash when I turn the key on any advice?
@kylelickfelt28045 ай бұрын
Where did u get that tire machine from?
@Yo-mamashouse6 ай бұрын
Where did you get the sporty mob bar clamp?
@Brappbruhclassic7 ай бұрын
Rear shocks ?
@gerrysf20007 ай бұрын
just get calipers with the banjo bolt and bleeder at the top of the calipers then its a direct bolt on
@Osyrus486 ай бұрын
Yep. Like the R6 calipers.
@SQUID_Road_Glide9 ай бұрын
I really like the way you made me feel like I was there with you. I even forgot the mistake of having a Street. 😂 The hidden gifts are a cool idea. I am curious if moisture is a concern for the over night purge? BZ, subscribed, 2FD Brah SQUID ET1(SS/SW/MTS) US Navy, Ret.
@shawnmacattack349510 ай бұрын
Does he make those for sporty’s
@crookedclubhouse10 ай бұрын
No he doesn’t unfortunatley
@Dr_pepper.stunts10 ай бұрын
Pure gold
@airgun111 ай бұрын
You need to cover the static Timing.
@daver829811 ай бұрын
Nice video. Putting new bars on now. Helped getting access to the bolt heads
@RWCLOCO11 ай бұрын
I want to do the same but all i see is bad reviews on the volt meter and usb chargers that they go bad quick and voltage ain’t accurate
@dennispasquale7291 Жыл бұрын
how much?
@TevinCambell-u9x Жыл бұрын
Attention to Detail'
@crookedclubhouse Жыл бұрын
Good or bad?
@mkrayaries1280 Жыл бұрын
They don't say weather I can run same coil or not nor dose it say if old cup will work
@crookedclubhouse Жыл бұрын
You need a new coil from ultima and the stock cup works still
@mkrayaries1280 Жыл бұрын
@@crookedclubhouse thank you 🙏🏼
@mkrayaries1280 Жыл бұрын
Do I need new coil and do I need the timing cup I bought the same ignition on ebay
@crookedclubhouse Жыл бұрын
Yes new coil can use stock timing cup
@pOoKaBoOiE Жыл бұрын
I’ve got an 03 883 sportster I’m installing this in, by bike doesn’t have a tachometer, do I just not use the green wire?
@crookedclubhouse Жыл бұрын
Correct
@3eyedcodi Жыл бұрын
What seat is that! I’ve been trying to find a step up seat for my 95.
@crookedclubhouse Жыл бұрын
A newer touring bagger seat I made a bracket for
@3eyedcodi Жыл бұрын
@@crookedclubhouse can u send some pics of the becket please.
@richardpetrie318 Жыл бұрын
What a load of bollocks
@chrismarshall3121 Жыл бұрын
We found if you are using a vacuum bleeder and pull vacuum with the bleeder open and pump the leaver simultaneously it works very quickly and don’t get a spongy leaver. And don’t need to let it sit with pressure either, hope this helps someone!
@dalevonterobinson3251 Жыл бұрын
love it .
@Unclejessestunts Жыл бұрын
What fork tubes are them seem like a lot of travel
@crookedclubhouse Жыл бұрын
T bros+ 2
@FordfR1 Жыл бұрын
What crash bar do you have?
@82donut Жыл бұрын
Gixxer calipers! Slap on on gsxr forks n bam
@everperez8538 Жыл бұрын
Very nice sporty.
@madhatterindustries1076 Жыл бұрын
Love it! We'll have to chat with the OG crew about a Fork Brace for this year :)
@dextersimmons6020 Жыл бұрын
You didn’t have to put spacers at the top of the shocks ???
@crookedclubhouse Жыл бұрын
Sorry yes I did little washer ones they sent I do believe
@devinratliff3335 Жыл бұрын
I have a couple street bikes but the ZRX is the only one the Harley guys wave to probably my round headlight anyway I thought those shocks looked familiar great video
@BeeGee7719 Жыл бұрын
Did you get those powder coated?
@crookedclubhouse Жыл бұрын
The wheel? Yeah
@BeeGee7719 Жыл бұрын
Cool. Might be a better option, cheaper,than looking for the rear turbine wheel. My bike is in the shop and the guy has a front if I want it and tells me to look for the rear
@crookedclubhouse Жыл бұрын
@@BeeGee7719 yeah powder is good just gotta replace bearings
@baileypurvis8548 Жыл бұрын
I did this. Not sure if its sealed right at the air cleaner or we didnt drill a big enough hole but my bike sputters when i goto pop up the bike. Also going 60mph, if i quickly goto wide open throttle it sputters for like a second, almost sounds like anti lag on a car. Also feels like i have a tiny bit loss of power. Also feels like its not fully engine breaking. Like the idle is set way to high but the idle is at 1k rpms. Im super confused on whats going on.
@crookedclubhouse Жыл бұрын
Did you get metal shavings in the bowl on accident? Maybe sucked into a jet
@denverbrown4530 Жыл бұрын
Mine was doing the same thing it was an air leak caused by a crappy seal where the carb goes into the intake manifold.
@crookedclubhouse Жыл бұрын
@@denverbrown4530 makes sense!
@albertoramos3169 Жыл бұрын
Did you ever find out this issue??
@jaredkish992 Жыл бұрын
Tap a quarter/20 set screw at 3/8th length and take the risk and sand it down or take it to someone who feels comfortable doing it… I went with a video suggesting 7/64 hole (which I did). My bike is running amazing and I don’t feel any loss. Also a big ALSO! If your trial and erroring just get some amazon carbs and drop your OEM parts in and find what works best ;)
@albertoramos3169 Жыл бұрын
Great video thanks bro doing mine asap
@chrisburdic9562 Жыл бұрын
You guys are Beast ❤🤘🏻
@DeadliestToast Жыл бұрын
Legends has it that this guy is still running from that cop
@2easy4butch2 жыл бұрын
nice
@janvertonghen142 жыл бұрын
Flee from the Police once again
@Motorcycle-Moments2 жыл бұрын
Hello! May I use your video on my channel please? Thank in advance...
@crookedclubhouse2 жыл бұрын
Go ahead
@Celo02 жыл бұрын
what is this bike please ?
@crookedclubhouse2 жыл бұрын
2008 sportster 883
@ncautolink2 жыл бұрын
Looks great!
@dannyolson57192 жыл бұрын
In the kid in the brown vest i got a new youtube account. I subscribed though
@dannyolson57192 жыл бұрын
Im*
@codyburke11912 жыл бұрын
im wanting to do a 24/60 on my 2019 883. is that to much?
@crookedclubhouse2 жыл бұрын
Won’t be very street friendly is all
@MrRourk2 жыл бұрын
Wonder if this would fit to help protect the hole - TA254-1 MINI SPLASH PROOF BREATHER
@crookedclubhouse2 жыл бұрын
I’ve rode in downpour rain wheelies no issues
@MrRourk2 жыл бұрын
@@crookedclubhouse Nice
@JavierBlanchardBJJ2 жыл бұрын
Thanks my friend we just installed them on my performance bagger