Im absolutely at wits end i can not get this interface to work with my pc shouldn’t be hard at all, I’ve got a ead10 and that was super simple to get set up..

on mac, does anyone else's Behringer keep popping? it makes a nosie through headphones when usingwith ugitar

S.O.S.... My Mac Pro stopped reading my U-phoria UMC 404. the U-phoria is getting power but my Mac does not read it. Does anybody know why or might have a solution, please??? Many thanks!!!

Why is this needed ?

why I can record on macbook m1 sound from behringer umc202hd only from left channel? I use only one microphone, how to fix that to have stereo recording on the both channels?

how bout running this on a tablet i did before and need to get the get it again where is this download ?

How do figure if mine needs calibration? The highest A is out compared to the lowest ?

Instead of overwriting the defaults on PC, can you select it to be default in only some software, for example IK MultiMedia?

My interface is not getting recognized by my computer even after installing all the drivers and everything. I’m not sure what I’m doing wrong

Is there a video with widows 10? I am stuck after dowlading the driver and doing a reboot to computer. I can not choose the sound device from anywhere.

Ive set this up on both mac and pc, but on mye mac I only get sounds on the left side when I use a headset plugged in to the interface (UMC204HD). How do I fix this?

I just bought the UMC 204Hd and it does not support win 8.1 , the driver setup from the website starts and ends instantly after displaying setup failed due to error . I tried installing the device on my laptop - same case . I think untill behringer fix this issue the hardware is going to be for windows 10 exclusive use only . Its major BS . It just does not recognise windows to show up as an option for playback or recording . If anyone has a fix for this please do tell , i dont want to sell a brand new purchase .

I found some files from your website which is VST effects. But there is no guide for using that. Could you please help me out? Thks!

Just bought this audio interface to record sound from podcast mics and I'm GOING INSANE. I've configured the right audio settings in FL studios which is my DAW. Neither asio4all or UMC Asio is working and so I'm currently getting NO SOUND. Does anyone know how to fix pls???

how connect behringer umc204hd to dj controller (reloop beatmix 4) without audio mixer and what cabels i need ?

completely useless thanks.

Has anyone found out where the other end of the cat5 cable were connected to in this video? Great concept, great product, but super sloppy company!

Does anyone know where I can find an inexpensive choona?

Doesn't work on Windows 11 despite your terrible out of date driver from 2021 which was for Windows 10 and 11. The audio just stutters violently. Don't bother getting this guys if you have windows 11, utter waste of time and money.

pc doesn't recognize behringer202hd..windows 8..I've been dealing with this for an au...I took it to repair, they said it's not defective..the tool is fine.but it doesn't see windows..

I have one

Our Website is terrible all I wanna do is talk to a technician and I have to set up an account and go through all these hoops ridiculous

Mini Mac 13.3.1 will not recognize Behringer 440 I followed all the steps in this video and researched others. I’ve had absolutely no luck my computer simply will not register any signal from the Behringer. If I plug the headphones into the Barringer icon hear my audio. But still no signal seems to be registering with the mini Mac. Anybody have any ideas. It used to work until I got this computer repaired perhaps he did an update to change things I don’t know. Please help

Hi, Need your support. My windows 11 can't detect the audio interface. I have downloaded the latest driver but nothing has changed.

TENGO TIENPO BUSCANDO UN VIDEO DONDE PUEDA AGREGAR UNA EXTENSIÓN TOUCH Y JAMAS LO HE ENCINTRADO NECESITO VER COMO SE AGREGA UNA EXTENCION Y CONFIGURARLA

I have audio interface Behringer umc 204 hd and it never recognize! Two months and it not working! I change my computer for that but not working never recognize!

"Doesnt do what it says.."

How often is this procedure required?

Hello, at 1:20” can you please give serial number when the new version of model d starting?

does this work with poly d

Thanks for the review. I recently purchased the X-Touch to work in conjunction with the XR 18 mixer for live performance. I couldn't figure out how to take the signal from the X-Touch via USB or any other method to send it to Live Strimming. Those videoclips are supposed to answer this question - did not give an answer. I would be grateful for help.

@BehringerKnowledgeBaseOfficial Who dropped the ball in the over all design of The Behringer Model D? The reason why I ask you this, is there are other analog synthesizers out there, that have an external tuning knob on the surface of the unit for that same purpose of fine tuning the OSC's... Respectfully, having an external knob to tune each OSC should not of been that cost prohibited to stop your design to including those external tuning controls.

Change scribble strip

neither of the two examples you show resemble the layout of the trim pots on my ModelD. mine has only one pot labelled osc sw and then a +10v adj pot and a _10v adj pot. It's easy enough to get an octave or two in tune but any more than that it goes out of tune. I can't find any calibration instructions that match the synth I have.

Anybody have a second to help me collect the pieces of my blown mind? Incredible tech for very reasonable cost. Keep it up, Behringer!

is this works for pro 1?

great

entre para activar Deckdance 2 y no me sale lo mismo del minuto 2:11 en la ventana solo me sale todo en negro

FYI the midi/USB adapter shown here (the cheap no-brand oval shaped ones with just a treble clef logo) don't pass sysex properly. I've ran into problems trying to transfer patches into a Korg FM2 with one of those. If you need to send the Sysex to reset the device and nothing happens, try with a better midi interface. A Roland UM-One Mk2 should do the trick.

I'm using a late 2015 iMac for this audio setup. (And something more powerful for my 4k video editing) For monitoring, am I better off using the audio outs on the Behringer unit (maximum output level +3dBU) or the pathetic little mini-jack on the iMac? I do suspect it's swings and roundabouts here... 😂

I cannot control the audio of the interface through windows! Changing the volume does nothing, it's only at one level.

Thanks for your help :)

hey, I have a 404 and I use Logic Pro on the Mac and I have this terrible input delay, can I get a hand resolving?

I have a year old Poly-D and this was invaluable. Thanks for the info. My Poly-D is about a year old and as soon as I receive the insulated screw driver, I'm diving in.

Porque conectan a una MacBook si solo hay driver para windows??????

Is the Behringer UMC1820 (or Any Behringer Interface) compatible with Audacity/Ubuntu 22.04? I am thinking of buying a UMC1820 to upgrade my recording studio. I have an Ubuntu 22.04 Operating System, & use Audacity (latest version). I've searched the internet, seeking answers, this video is the closest, I've come to finding an answer. I don't want to spend money on an interface that isn't compatible with what I have. NOTE* I already own 2 Digital 8 Track Recorders (TASCAM DP02 & DP03) but the final product (IE CDs/MP3/etc) is lacking in Volume for Radio Play.(I have had several songs played on FM & internet radio) I was told that, though my recordings are GOOD, they lack the Volume necessary for Radio play. they had to tweak my recordings just to get them close to the minimum volume required. ANY info would be greatly appreciated. I'm most definitely on a shoestring budget, that's why I chose Behringer. I have used several of their products over the last 20 years, & was always happy with their performance.(despite what others have said) PLEASE any info would help. Gil

But how do I connect two 8 channel interfaces to have 16 inputs and make my DAW work. I'm ripping my hair out trying to do this. Nothing seems to work.

On my Model D, the trim pots of OSC2 Range and OSC3 Range only go up to a G#5. I can't get them to reach a perfect A5 pitch. This way the whole synth keeps sounding out of tune. Anybody know what I should do? Tune all the oscillators to a G# instead of an A? For Range and Scale?

🙄"Sigh-sex"? Never heard anyone pronounce it that way. Being it stands for System Exclusive, you don't say "Sigh-stem" do you? so can't be a regional/accent thing

why i cant not create a new account by the cakewalk website ?