Пікірлер
@RobertoMarquez-i3u 4 күн бұрын
Can I send you my cluster to install new led light 2007 Chevrolet and how much?
@Tachtronics 4 күн бұрын
@@RobertoMarquez-i3u yes, is it the classic body style or new body style? If you’re not sure, you can send us a VIN# or email a picture to [email protected].
@tellitallnow3914 Ай бұрын
So, I have a 2002 Chevy avalanche. And we are told we can't have a transmission temperature gauge installed in our cluster because there is no transmission sending unit on This year of avalanche BUT when I installed my diablo sport, trinity t1000 tuner/programmer which hooks into the OBD2 port and it tells me my transmission temperature so I must have a sending unit on My transmission. What say you. I know I have the spot in the gauge cluster for a temperature gauge and would really like to have one installed if anyway possible and if it's not because of no trans temperature sender in the 02 Avalanche why is it that a temp gauge can not be installed in an 02? Thanks for your time.
@Tachtronics Ай бұрын
@@tellitallnow3914 your logic is correct, the truck has a trans temp sensor and if the gauge was there, it would display a trans temp.
@nickdibiase123 Ай бұрын
Great video! will be buying your leds.
@7808y Ай бұрын
Good video. What type/rating led do the clusters take?
@SRGShorts225 Ай бұрын
As someone who don’t know how to solder, I think I will go with the $315 premade ice blue cluster on Amazon.
@JoseRecinos-n6o Ай бұрын
I am here in Tucson Arizona could you send me the complete address of your shop to completely updated the soldering contacts and place new Green LED ‘s please it’s a 2003 Silverado
@Tachtronics Ай бұрын
@@JoseRecinos-n6o Tachtronics, 1547 Bailey Park Ln Knoxville, TN 37922
@Tachtronics Ай бұрын
@@JoseRecinos-n6o please include the service order form with your cluster so that we know exactly what you’re wanting and know where to ship it back to. It can be found at the bottom of the home page at www.tachtronics.com
@cyruswampler1311 2 ай бұрын
I also wanted to change the lights in the climate control, Lights panel and window controls, Do they use the same bulbs and if they do is there a way i could order extra bulbs from your website
@Tachtronics 2 ай бұрын
@@cyruswampler1311 they are not all the same. Email us at [email protected]
@tewydood 2 ай бұрын
Great video, looks like WhistlinDiesel took an IT Career instead of farming
@here_to_watch2115 Ай бұрын
😂
@CCCC-tq8yo 2 ай бұрын
U don't take credit cards lol
@StarrYLDaGreat 2 ай бұрын
Can anyone help me do my cluster on a corolla 2013 LE? I'll pay. I don't trust myself to do my own cluster
@GroundLevelQLD 2 ай бұрын
Hi mate. Great video. I have a 2006 Sierra 2500 that has the cluster with the printed PRNDL with the small orange lights that indicate the gear selection underneath. 2 of those small orange lights are dead on mine. Have you come across this before? Do you know if they can be removed and replaced with new ones? Nothing else is wrong with my cluster- steppers and back lights are all good. Thanks again.
@Tachtronics 2 ай бұрын
@@GroundLevelQLD hello. I would say it’s very rare that those little orange lights fail but it is technically possible and yes, they can be replaced. They are surface mount LEDs.
@GroundLevelQLD 2 ай бұрын
@@Tachtronics thanks legend. Yes- I was poking around and damaged two of them. I will have to track down two surface mounts. Thanks.
@Tachtronics 2 ай бұрын
@@GroundLevelQLD you’re welcome
@GroundLevelQLD 2 ай бұрын
@@Tachtronics so I just pulled the cluster back out and checked over every bit of oem solder- and I could see no cracks in the solder or yellowing etc. For this particular model (2006 2500) cluster do you know which components correspond to the PRNDL orange leds? Thanks for your time bud!
@Mower117 3 ай бұрын
Fantastic video, thank you. But, for me the background music was horribly distracting. Thanks for links, too
@Tachtronics 3 ай бұрын
@@Mower117 Thanks for the feedback
@jamesarm1 3 ай бұрын
Love your videos! Watched your videos and purchased your leds, and they arrived very quick! Followed your instructions installed them in my 2003 Silverado and saved me a lot of money plus I can see my Cluster at night again and I love the new ice color vs the stock. Thank You! Your the man!
@Tachtronics 3 ай бұрын
@@jamesarm1 awesome! Glad to hear of service 😊
@tacohockey5654 4 ай бұрын
Orderd blue LEDs for our 03 GMC Sierra. The instruction sheet was simple & straight forward. We followed your video and the entire process took just over an hour. Now the dash lights are beautiful. THANK YOU.
@Tachtronics 4 ай бұрын
@@tacohockey5654 awesome, glad to hear it went well! Thank you for your feedback 😊
@dylanrogers7775 4 ай бұрын
What is the far left bulb for ?
@Tachtronics 4 ай бұрын
@@dylanrogers7775 cruise control
@boostedc6zz 5 ай бұрын
does this also apply to a 07 Chevy Silverado regular cab also just a question because I’m curious why e brake and 1st gear.? e brake I understand but why first gear
@betod3113 5 ай бұрын
Very cool I want to change mine in my 2010 chevy tahoe mine came all green I want blue make it look cool.. where can I get some leds for the cluster?
@Tachtronics 5 ай бұрын
@@betod3113 email us at [email protected]
@larrybud 5 ай бұрын
Lose the music and this would be A+. Love the multi cameras.
@peterlombardo9241 6 ай бұрын
How did you get the odometer red?
@Tachtronics 6 ай бұрын
@@peterlombardo9241 sanded off the original green film off of the appliqué and then added a red film
@JosephOlson-mn3go 6 ай бұрын
Hey man I just saw your video I got a 2005 gmc sierra 2500 do I wanted to do a entire light change on it turn signals everything and the back dash plate and everything if you’re still doing custom stuff I’d love to have it sent to you
@Tachtronics 6 ай бұрын
Hello. Looks like you sent us an email as well. I will get in touch with you there. Thanks
@eyadalghatam 6 ай бұрын
Anything for 2012 suburban?
@Tachtronics 6 ай бұрын
Email us at [email protected] and let us know what you have in mind.
@johnharrison5098 6 ай бұрын
question...do the clusters with the twist in bulbs work on 03s? im not very solder-savvy
@Tachtronics 6 ай бұрын
No
@johnharrison5098 6 ай бұрын
@@Tachtronics whats the difference? bc i have a 1500 cluster in my 2500hd rn and the guages work...cluster is the same as in ur video wo trans temp guage
@Tachtronics 6 ай бұрын
@@johnharrison5098 the ‘99-‘02 clusters look very similar to the ‘03+ on the surface but very different internally. I’ll spare you all the minute details but if you swap them, it will not power up due to the polarity on the plug being different.
@alexnavarro4976 6 ай бұрын
Just curious which one is the positive and negative on the cluster for the bulbs you’re replacing?
@Tachtronics 6 ай бұрын
You’ll either need to power it up and test for polarity or if you buy the kit from us, we include a diagram that shows the polarity.
@Bubba773 7 ай бұрын
Why does he look like whistlingdiesel
@jstew4941 7 ай бұрын
Are idiot lights bulbs
@jstew4941 7 ай бұрын
Are idiots bulbs
@Jessersadler 7 ай бұрын
So these bulbs allow you to use the dimmer?
@Tachtronics 7 ай бұрын
Yes
@chadallen6056 7 ай бұрын
I had a speedometer that wasn’t working and a temp gage and I replaced all the stepper motors And bulbs and now the lights won’t come on when I turn the truck on and it’s a 2007 Chevy Silverado 2500hd classic..as far as I know iv done everything right..any help would be much appreciated
@Tachtronics 7 ай бұрын
Are the rest of your dash lights coming on (ex. Radio, HVAC controls, etc…?) if not, you’re light switch is out. If it’s just the cluster not illuminating, I’d reflow the circuit board where the wires plug in to the cluster.
@chadallen6056 7 ай бұрын
Yes all lights on dash work..just the lights in the cluster that I replaced won’t come on when I turn key on
@Tachtronics 7 ай бұрын
@@chadallen6056 in that case, I’d start with reflowing the plug where you plug in the wiring harness
@justinweathers7180 8 ай бұрын
Glad this isn’t a how to video
@dkathrens77 8 ай бұрын
I don't know if it's been pointed out in relation to nighttime illumination, the human eye is most sensitive to blue and green, using the cones in the retina. At night, one doesn't want the cones waking up, night time is where the rods are needed. Colors below yellow are what the eye naturally "expects" to see at night. Even that blue High Beam lamp in my dash drives me bonkers. So I drive 99.9% using dims at night. Many deer have survived crossing the highway at night because of that AND driver's unimpaired night vision. No blood and guts in my grill, no dented fenders or smashed windshields. I say ANY lighting, inside or outside the car has NO place being even partially green or blue AT NIGHT. It's a serious safety issue, IMO. Of course, outlawing all those bluish and greenish headlights will never happen--bad for sales & profits. Seems one's only defense is to wear yellow tinted "night driving" shades. Try it and see for yourself!
@justinschubbe5707 8 ай бұрын
My leds always ends up flickering eventually. What am I doing wrong?
@Tachtronics 8 ай бұрын
Where are you getting the LEDs?
@justinschubbe5707 8 ай бұрын
@@Tachtronics first was off ebay and then I bought more expensive ones from Amazon
@Tachtronics 8 ай бұрын
@@justinschubbe5707 I don’t know exactly which leds you purchased but there are lot of very low quality LEDs out there. I don’t think you’re the issue, most likely the issue is just not using quality LEDs. Here’s a link to our LEDs. We guarantee them for a year. Our failure rate is well below 1% for the remaining life of the truck. www.tachtronics.com/product-page/diy-kit-led-with-instrucrions
@victor.hugo.differentialz 8 ай бұрын
Subscribe
@killbill4594 9 ай бұрын
бахти грозния уруд 😁
@josesegovia7552 9 ай бұрын
Hey. What’s. Up I need to fix my how. I can contact you
@trashyratchet674 9 ай бұрын
I know this is an old video, but hoping to get some insight. I've completed some led retrofitting on the cluster and some other components. I am getting a dimmer control circuit 1 and 2 DCT errors now B2610 and B2615 although the leds seem to dim fine for the most part. The dash doesn't dim all the way to off with the dimmer potentiometer, but does dim. Is this something you may have dealt with in the past that you may help point me in the right direction? 2006 Tahoe. Does the BCM possibly see the lower current draw as a bunch of open bulbs or something?
@mikewall1375 9 ай бұрын
I went to your site and I didn't see the option for the premium chrome and blue needles you used here.
@Tachtronics 9 ай бұрын
I quit selling them due to them being pretty problematic. GM Guage Repair sells them on eBay.
@mikewall1375 9 ай бұрын
@@Tachtronics yeah I saw that. They want 125 bucks for them. Is that the problem or is there another problem with them? Should I avoid them? I like the way they look, but if they're junk then I don't want that.
@Tachtronics 9 ай бұрын
@@mikewall1375 they look nice but don’t illuminate very well and the even bigger issue is they’re built very cheap and therefore break pretty easily.
@Freemasonshair 10 ай бұрын
You’re really not gonna tell me is which is positive and negative?
@Tachtronics 10 ай бұрын
The kit comes with a polarity diagram. Also not hard to figure out, just takes a little more time. www.tachtronics.com/product-page/diy-kit-led-with-instrucrions
@joemiller2057 10 ай бұрын
how do u reprogram these so they match the hours and millage and settings for your vehicle
@redin575 10 ай бұрын
Uh ... thanks, I guess, but what I was really looking for was instructions for how to remove the cluster from the dash.
@Tachtronics 10 ай бұрын
kzbin.info/www/bejne/iHLEZqSqhpaDrpIsi=GkmbHR5IKZM46yYL
@redin575 9 ай бұрын
@@Tachtronics Thank you.
@Tachtronics 9 ай бұрын
@@redin575 You’re welcome
@King_Maxx7 10 ай бұрын
Were you located
@Tachtronics 10 ай бұрын
We have two locations. Email us at [email protected] and we can determine what works best for you.
@jamalwright1539 10 ай бұрын
Tachtronics can I pay you for this service? Do you also do the heater climate control?
@Tachtronics 10 ай бұрын
Yes, please email us at [email protected].
@Tachtronics 10 ай бұрын
To order a DIY LED kit with instructions, click here: www.tachtronics.com/product-page/diy-kit-led-with-instrucrions
@Tachtronics 10 ай бұрын
To order an LED kit with directions, click here: www.tachtronics.com/product-page/diy-kit-led-with-instrucrions
@boggsie5817 10 ай бұрын
If I'm replacing all the steppers with x27's, would it matter about marking anything for the needles ?
@Tachtronics 10 ай бұрын
You still need to mark the position of the needles so that you can use those marks to calibrate it when you reassemble.
@lukestortroen609 11 ай бұрын
Can you change the turn signal bulbs as well
@Tachtronics 11 ай бұрын
Yes but not recommended.
@lukestortroen609 11 ай бұрын
Why is it not recommended
@Tachtronics 11 ай бұрын
@@lukestortroen609 1. A bright flashing light in your face, particularly after dark, can have a momentary blinding effect and 2. There gauge face has a green film on it so even if you change the color of the LED, it is probably not going to shine the color you’re wanting after the light shines through the green film.
@lukestortroen609 11 ай бұрын
Makes sense. How much is it to upgrade. And also can you do all the switch and climate control
@Tachtronics 11 ай бұрын
@@lukestortroen609 email us at [email protected] please.
@dannyarreola4035 11 ай бұрын
How do you change the odometer and gear selector lights?
@Tachtronics 11 ай бұрын
You’ll need to put film over them. They don’t have lights that can be swapped for difference colors.
@fpl343 11 ай бұрын
Trying to set up my table to do this, disabled and looking for a side hustle. How do I build the wiring to power the cluster? I can get the connector at the junkyard but what wires, power supply do I need? Any advice is appreciated 😎
@SilveradoUSA1 11 ай бұрын
Great video but your desk lamp is too bright. Can't see the LED lights very well when ON or OFF.
@MarcoZamudio-le2i 11 ай бұрын
Im looking to start rebuilding clusters or making custom cluster but dont know all the parts i need to start the businesses
@dannyarreola4035 11 ай бұрын
How do I get that power source adapter
@Tachtronics 11 ай бұрын
I got a pigtail from an auto salvage yard and then hooked it up to a 12v power source. Probably not worth the trouble unless you plan on doing more than just one or 2 clusters.