It dont have to do with using diffeen paint than other
@AndrewMurphy838314 сағат бұрын
As a autoboy paint guy the only way i got orange peel is when i use the wrong tequne
@AndrewMurphy838314 сағат бұрын
When wet sanding use a wet and dry sand paper
@saltworth2570Күн бұрын
XD I was going to say "Not over the jeans maaaan" and next scene clap clap clap the dust from jeans xD.
@mar_mar_333 күн бұрын
that was so helpful and informative. Thank you!
@kdschloemp4 күн бұрын
Where is this coupon code for the files? I ordered the electronics ($70 with shipping)
@GaimingPostaman-KingSponge-4 күн бұрын
Dude! PLEASE do more videos on Supernatural. I know this is like 3 years old but I've seen this literally nowhere else. Bought all your files but I'm going to be FDM printing them!
@tenktorypisze6 күн бұрын
is that a DUDE on your desk? :)
@Leo_messia6 күн бұрын
When I saw this video, I thought I should never paint it
@devildemon101th27 күн бұрын
We don't have bondo in Europe what can we use?
@YUSEIROBBY7 күн бұрын
Can I use a electric sander?
@linolampers20247 күн бұрын
My S4U has a warmed VAT, it gives also the temp in the little screen, also have a separate heater in it from Elegoo, only had some lamination on one side due to airflow from a window
@VoxelWorks3D8 күн бұрын
Great looking model!
@SuperBoyd10 күн бұрын
Hey I hope you see this and can give an answer. But when you did the spray primer, what grit of sand paper did you use and we as what grit did you use after you put the bondo on?
@cv50713 күн бұрын
cärp is -dög- geniüce ^+?^
@andrewcarter374813 күн бұрын
Enjoyed the video had mine just over a month but now it gets stuck overtime I retract the filement
@SanaiGaming13 күн бұрын
This is the most detailed description on the process I've see so far. Big thanks for sharing it with us!
@jakemurray372214 күн бұрын
What colour did u use for the bullets
@NerdBlockVersion1.016 күн бұрын
Question for you. I 3d printed a pokeball . I sand it down also did wet sand . Came out smooth. I hand painted with acrylic paint and it was still looking good. When I put the clear coat spray on it, tho it looks weird. It's not as smooth and looks like gunk I don't know how to describe it but it's not shiny like your helmet
@elladar217 күн бұрын
@erexit3D
@willcraftxxd1417 күн бұрын
THANKS YOU ❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@danielbeaumont374419 күн бұрын
this is bizarrely one of my favourite droids in the entire star wars universe, i might have to give this one a go too 😁
@frostmanticorerockadile996819 күн бұрын
This video is awesome! Thank you! Just 1 question: what battery did you use?
@antoniosalinas817820 күн бұрын
best k1c mod tool is the "tool trays" that you can attach on the antivibration legs
@vaulted423920 күн бұрын
Man I want to make this costume so bad, Michael Hardesty sells like 90% of the items and my parents might help me get it for Christmas this year. I would buy it myself but my parents are kinda skeptical of Michael and would rather buy it themselves
@fusionor20 күн бұрын
Link to the STL?
@Jedi_Jeff25 күн бұрын
This is sooo cool!! I'm definitely going to hit up his link.. I want to build this so bad. I hope I can make this using a resin printer 😊
@Jedi_Jeff25 күн бұрын
I just joined his Patreon
@SaitoGray25 күн бұрын
You can't print gear in resin. The friction alone will destroy them.
@3DPrintedProps25 күн бұрын
He's a great guy and an amazing community
@3DPrintedProps25 күн бұрын
These were all printed in fdm with 4 walls and 35% gyroid infill. I just printed the detailed greebles in resin. :)
@Jedi_Jeff25 күн бұрын
@@3DPrintedProps looks like I'm going to have to buy an FDM printer.. shucks
@mertz730525 күн бұрын
THAT IS A AMA ZING!
@3DPrintedProps25 күн бұрын
Thanks! It was a challenge at times but I do love it
@TheMormonInformant25 күн бұрын
Loctite degrades plastic, just fyi.
@3DPrintedProps25 күн бұрын
Huh. Good to know. Thx 😊
@chemicalcorrosion21 күн бұрын
It sure does. It completely crumbles acrylic. Learned that the hard way😢
@ronm658525 күн бұрын
Nice, thanks for sharing.
@ColoradoMcGees25 күн бұрын
Thanks for the walk through on this!
@tommasoviglietti25 күн бұрын
Congratulations! These upgrades for K1C are fantastic. What type of filament did you print with? Thank you.
@Sgt_Hest27 күн бұрын
Most of the cons of this printer are really silly and elegoo should have enough experience by now, to not make these mistakes. I really hope they will start to learn from their mistakes
@IfDawidCanYouCan28 күн бұрын
Hello there, I’m so excited to hear all but I got some issues. I had to return my first one (K1C) as the extrusion system jammed and I couldn’t remove them conveniently. As myself New to 3D Printing and had bad experience with CR-10 SE and Ender-3 S Pro (I think), I decided to have this K1C as it adjusts and tunes everything itself. Being disabled I found those tasks kinda troublesome at times for me. Since I got the replacement K1C and started printing it keep showing me that it Runout of Filament, whereas I just opened the New Spool and it Extrudes fine. I would love to show you the photos of my props I downloaded from the Creality Cloud but not all of them seem working as they supposed to. Any advice would be much appreciated. Thank you in advance! Remember, *_Life_* is *_Short_* so *_Live Long_* and *_Prosper_* 🖖… Cheers!!!
@r3tr0guy4028 күн бұрын
I was able to locate the file for the filament spool side mount on thingiverse as you mistakenly forgot to link the description just mentioning encase others are troubled about finding the exact same one
@debrabrown777625 күн бұрын
You found that exact one? I wasn't able to find it
@Bring_TheReal122 күн бұрын
it came with the printer
@debrabrown777622 күн бұрын
@@Bring_TheReal1 the one that came with mine doesn't look like that, the one in the video looks nicer
@Bring_TheReal122 күн бұрын
@@debrabrown7776 Its the same, maybe the material is "better" or well sliced
@debrabrown777619 күн бұрын
@Bring_TheReal1 it's definitely not even close to the one that came with my printer. It won't let me show a pic but they are not the same
@MrBaskins2010Ай бұрын
nice and simple mods
@R3dstoneАй бұрын
What perfect timing, we recently got a K1C and I’ve been watching videos like this to find ways to upgrade it! 😮
@carlosdaparicio7432Ай бұрын
Did you upgrade the prop to accommodate the ADAfruit components upon getting your STL files as of now?
@Gorilla_JonesАй бұрын
Is there a way to get it to be totally clear like glass.
@therevilozaАй бұрын
Thank you for an amazing review. I must agree with you on having the glass lid off or at least a riser with PLA. Another thing is i dont see the link for the spool holder maybe I am Blind 🤣 But I love my K1 MAX and about to embark on the K2 Max which is comming soon.
@thediscoman2001Ай бұрын
i agree mostley in part as i have some of these i dont agree with the screen portion as i dont have an issue with thatg the heater deffo needs that im in uk and it gets cold in winter, the bib they could have designed something made of flexable material instead of the plastic one would have been better, as for the heater its total waste of money in my opinioin they could have made this part pf the printer but instead becasue the community complaied about a heater in it i think this was an after though or a good decisiion to make it even more expensive to add thigs u need to buy as aftermarket addons
@l.emerson3699Ай бұрын
So I’m a few years late to this party but thanks for doing an entire series on red hood. I just finished printing mine today. I do have one question though. How long did you wait between the last coat of gold and the first coat of red paint?
@ChameChamАй бұрын
Say the circumference is about 25in, what size would you recommend the helmet? Thanks!
@Botanical4038Ай бұрын
Flexispot sponsorships got KZbinrs acting like sit stand desks just came out this year 😂 bro, my standing desk from YEARS ago has presets.
@MDigitalProductionsАй бұрын
"My Bloody Valentine" is such a fun slasher, and right my alley! Love this!
@michaelaaronhardestyАй бұрын
Awesome man! And don't worry, you pronounced my name right haha 😉
@ronm6585Ай бұрын
Thank you. 👍🏻👍🏻😊😊
@BloodyShedProductionsАй бұрын
Awesome
@TerranCmdrАй бұрын
Excellent timing with this. I just started on my own Q-pack and this will be great to follow along to. I'm doing mine in PETG which so far has been ok but much harder to get to stick to my print bed. Looking forward to the next video!
@3DPrintedPropsАй бұрын
Be sure to use a wide brim, like 5 or 6 and add glue stick to ur bed. Should help.
@TerranCmdrАй бұрын
@@3DPrintedProps I've been doing a brim and glue stick but what has worked the best so far is hairspray and a slow speed!