Thank you so much for providing this video, I've been searching on YT and reddit for days trying to restore a crashed SD card for my Super X console cube. I am still not there yet but closer than I've been. I followed all your steps and when I put the card it it goes to the Kinhank screen but then black screen, where previous attempts it would keep flashing the Kinhank screen. Not sure what next to try, as previous flashes and builds are creating only 2 partitions, the EMUELEC and then emuelec allocates the entire rest of the card space the STORAGE partition. I will wait first, since emuelec did not boot up, perhaps it cannot find the img file or I need to try a different one?
@SAMUELDIY4 күн бұрын
@@jac37040 thank you, I am sorry to here that you having trouble with your console. I couldn't understand if you are using a new SD card or you are trying to work with your old SD card. to me your problem sounds like an hardware issue and this can mean few things: the SD card itself or maybe a problem with the socket. Also it can be that your console is with a different hardware that is not similar to the one that this img was made from.
@jac370403 күн бұрын
Hi Samuel, sorry I wasn’t clear I was trying this on a brand new Sandisk 128 GB. The good news is, I still have the replacement sd card that kinhank sent when my last one crashed, but I fear that is not a genuine Sandisk and I’d sure like to find a way to clone their card and move to my new 128gb but so far I can’t get any methods to work. I haven’t tried imaging it with the software you provided as so far I’ve only tried Rufus and win32imager buy they err out or the console just can’t boot up on the attempted clone.
@SAMUELDIY3 күн бұрын
@@jac37040 @jac37040 try to clone your original SD card with those instructions : kzbin.info/www/bejne/d5bFapp7m7-BhdUsi=EiA1jU3Q5rC3JE92 In this video I am using a software called mini disk partition wizard to clone the console SD card to a smaller size of a card so you can skip that if your source and target cards are in the same size, let me know how it went for you.
@jac370402 күн бұрын
@@SAMUELDIY Thank you Samuel-- THIS did the trick for the Super X console cube!!! I now have 3 cards for when the next one fails.
@catabaticanabatic38007 күн бұрын
It would not last one day if used professionally.
@SAMUELDIY7 күн бұрын
@@catabaticanabatic3800 I don't know about one day but for using it 2-3 times a week for small projects it is more than fine, perssonly in the workshop I prefer the cord drill
@itechnoshop433110 күн бұрын
Crazy how hot it is now😢
@auicn11 күн бұрын
מדהים
@franckkarsentyguitare815714 күн бұрын
Very good deal 👍
@tomeylarisa14 күн бұрын
Good short and to the point bravo
@tomeylarisa16 күн бұрын
It sure is very useful device
@franckkarsentyguitare815716 күн бұрын
Very clever 👍
@SAMUELDIY16 күн бұрын
@@franckkarsentyguitare8157 thank you
@mrtreebagz705718 күн бұрын
It freezes and gets stuck when loading up
@SAMUELDIY18 күн бұрын
@@mrtreebagz7057 did you use a good quality SD card, if yes then you should try again
@shmuelosАй бұрын
The car is dudter year 2015 and it is not that sophisticated 😊
@SAMUELDIYАй бұрын
*DUSTER 2015
@Lucifer-vx7gjАй бұрын
Finally I updated my phone thanks
@shmuelosАй бұрын
That is absolutely great
@Green12hkiesieskАй бұрын
I don't know your car year but... Dont you have floor vents under the front seats that cool the rear seats? Meaning you would be better of installing fans there.
@franckkarsentyguitare8157Ай бұрын
Very cool 👍
@shmuelosАй бұрын
Thanks you 🙏
@chisomfinbarrs5164Ай бұрын
Worked as planned but a little more space still needs to be cleared from main drive
@SAMUELDIYАй бұрын
try to run the windows disk clean up tool with v marked on the system files
@zalmidobry4404Ай бұрын
היי מה המודל של המחסנית? תוכל לשתף גם בלינק לחתיכה שהדפסת?
@SAMUELDIYАй бұрын
זו מחסנית של אקדח צ'כי שקוראים לו CZ, הלינק לקובץ מופיע : cults3d.com/en/3d-model/various/masada-s9-17-round-magazine-extra-cover
@tomek198219821982Ай бұрын
I installed with your method and I have a problem with the sound, do you have any idea how to deal with it
@SAMUELDIYАй бұрын
sure ,go to Main Menu>EmuElec Settings>Audio Device and changed audio device from "Auto" to "0.1"
@tomek198219821982Ай бұрын
@@SAMUELDIY THX Bro its working :)
@SAMUELDIYАй бұрын
@@tomek198219821982 glad to hear that
@jillianwyatt1636Ай бұрын
do you upload videos on a regular basis?
@jillianwyatt1636Ай бұрын
@@shmuelosI hope things get better soon.
@SAMUELDIY28 күн бұрын
@@jillianwyatt1636 I am sure doing my best to upload once a week
@decentgaming001Ай бұрын
I want to do this, but buying a new one looks way cheaper
@SAMUELDIYАй бұрын
@@decentgaming001 you can buy only the sand paper for maybe 5$ ,and use toothpaste instead of headlight polish and rub manually and not with a drill to make the process much cheaper. Other than that sometimes it is not that easy to find the exact new visor to buy for your helmet model. But it is sure that buying a new one gives a better result.
@shmuelosАй бұрын
thanks, few months after shooting this video it hapoened to me to, this time I did not disassembled it because I was sure it is something with the tubes again, I just flipped it over and again with high pressure of air to this bottom holes I cleared the clog drain holes much fasyer then disassemble😊
@RomaDruzhkovАй бұрын
Thanks for the video! Mine didn't work because the nozzles on the bottom side got clogged due to hard water. This could be fixed without disassembly. I had to just puncture them with the needle.
@franckkarsentyguitare8157Ай бұрын
Perfect
@KOBALTBAND1Ай бұрын
Excellent 👌
@Alex-jc3pwАй бұрын
I can do this on a phone?
@SAMUELDIYАй бұрын
The software disk image free works on windows only ,so it wont work on iphone or android phone.
@AlexusMaximusDE2 ай бұрын
If you are going to replace the springs, replace them with silicone dampers. You will never need to adjust your bed level again.
@SAMUELDIY2 ай бұрын
Thanks, can you share a link to the dumpers?
@AlexusMaximusDE2 ай бұрын
@@SAMUELDIYI don't have a link. You need to measure the length of the springs you want to replace and then buy silicone 'bed spacers' of the appropriate length.
@SAMUELDIY2 ай бұрын
Thank you very much ,I will look into it
@SAMUELDIY2 ай бұрын
@@AlexusMaximusDEso from what I saw on the web it is a rubber shaped like a small scateboard wheel, think it possible to print this with tpu maybe🤔
@AlexusMaximusDE2 ай бұрын
@@SAMUELDIY It is not rubber, it is silicone and printing it from TPU is a bed idea because the heat from the bed will deform it. You could print a mold to make your own however.
@johnnenni71342 ай бұрын
I contacted you on Facebook, but no reply. If anyone sees this, I am sure there is a copy on Internet Archive, but that's a HUGE LIST OF STUFF. If anyone knows the link please share. I could even post it on my File Server and host it.
@SAMUELDIY2 ай бұрын
Yes ,this video is about making a backup for your original card,I made another video about restoring the card from scratch, kzbin.info/www/bejne/e33ceWlugcd8abssi=c5iEaVOZ-QrPYi3-. Also the archive that you talk about is in github and I will try to find you the link later.
@SAMUELDIY2 ай бұрын
also I couldn't find your facebook message but I think the direction to the github archive is this:github.com/EmuELEC
@franckkarsentyguitare81572 ай бұрын
I don’t like mosquito 😂❤
@princevinny00733 ай бұрын
must know how u connect the tv ??? what type of connector on that tv ?? Composite ???? yellow /red /white wire available? if not then what ?? RF ??? SVideo ?? Scart connector what is available and what u have it connected with ??? size of crt ??
@SAMUELDIY3 ай бұрын
The tv is 14inch size it got a composite connector at the back it is yellow color rca type. So the light gun has the male connector of this exact type and from the sony ps comes this yellow rca output into the female connector on the gun and the male connector on the gun goes to the yellow composite female on the tv. The tv also got one audio rca ,(mono) but I connected the red and white audio rca to amplified speakers that are on the top of the cabinet.
@princevinny00733 ай бұрын
@@SAMUELDIY thats awsome pal :D u made it so great i so wanna do something like this the smaller form factor is perfect :) for your home u could even do a 2nd one hehe
@SAMUELDIY3 ай бұрын
@@princevinny0073 thank you, I originally made this for the kids so it is 110 cm high and 40 cm wide, I might do another one actually case I found a 21 inch sony crt tv and I got two more guns, the only problem I have only one ps console, still I enjoy those shooting games
@princevinny00733 ай бұрын
@@SAMUELDIY yeah the gun games on ps1 and ps2 was amazing and i love ps2 time crisis 2 and 3 ps2 orginaly had a extra port on there consoles called (i-link) if u had doubble crt tv and doubble ps2 u could link both up and play just like the Arcade machine something not even emulators can do till to this day
@robdemeulemeester37693 ай бұрын
This was perfect. Thank you very much
@SAMUELDIY3 ай бұрын
thank you for the comment
@oksanalebrun54763 ай бұрын
Thank you for the video! Looks like it is simple to do. Going to get the battery after over 3 years of operation :).
@SAMUELDIY3 ай бұрын
yes it is very easy to do and sure worth it
@tomeylarisa3 ай бұрын
If you got a welder which I do, this is a fairly easy solution ,thank you very much for this, nice work😊
@Deadmare4 ай бұрын
Any idea what the storage partition is for?
@SAMUELDIY4 ай бұрын
I think in some games it will let you save progress
@Deadmare4 ай бұрын
@@SAMUELDIY I asked on emuelec reddit page it just where emuelec setting and themes for it are stored
@SAMUELDIY4 ай бұрын
@@Deadmare ok good to know ,thanks for looking this up for us, I always thought those settings are stored in the first partition that called EMUELEC.
@Deadmare4 ай бұрын
@@SAMUELDIY same here 👍
@FairyCS.4 ай бұрын
hello, does the suspension go down?
@SAMUELDIY4 ай бұрын
Well ,I am not sure what exactly do you mean by "go down", the suspension are not adjustable if that what you are trying to ask
@FairyCS.4 ай бұрын
@@SAMUELDIY I heard that in time the suspension wont be that tight and it goes down if you know what I mean
@SAMUELDIY4 ай бұрын
@@FairyCS. So now I am at 1600km of riding , the suspension are stiff as they were on day one, I take my son to school sometimes on the scooter together we are about 105 kilograms and have no issues.
@FairyCS.4 ай бұрын
@@SAMUELDIY ok thanks!
@SolarCookingGermany4 ай бұрын
Watch out for old rear-projection TVs, they have Fresnel lenses large enough for cooking.
@shmuelos4 ай бұрын
Well those tv are very rare in this days
@SolarCookingGermany4 ай бұрын
@@shmuelos I found 4 of them in the trash. People also often sell them for cheap, the only problem is the transport 😳
@WestCorkLife4 ай бұрын
why????????????? it has HUGE crack on pinlock pin area, its not safe to use it
@SAMUELDIY4 ай бұрын
It was huge but not so deep,no danger for real cracking and eventually I found an aftermarket visor in the exact size ,shipped it from europe and it works fine
@33Dragon.4 ай бұрын
Thank you very much for this video. It worked perfectly
@SAMUELDIY4 ай бұрын
Glad to hear
@franckkarsentyguitare81574 ай бұрын
With red color it will be a nice Ferrari 🏎️
@SAMUELDIY4 ай бұрын
I was aiming for mustang
@vickos10404 ай бұрын
Thank you very much
@franckkarsentyguitare81574 ай бұрын
Very effective 👍
@jgalela4 ай бұрын
Thank you
@SAMUELDIY4 ай бұрын
Its My plesure
@likeaboss51014 ай бұрын
After using sandpaper it's F*****d up
@DorRubinfeld4 ай бұрын
wow great crossbow! loved the idea!
@DorRubinfeld4 ай бұрын
Great Poop stool! I wish I could make it myself! oved the idea with the magents and the paper-bag! love your DIY videos!
@SAMUELDIY4 ай бұрын
Thank you for those very kind words
@kristiankundrat2835 ай бұрын
Thank you very much for the video!!! I disassembled the robot like you did and clean the water pipes with sirynge ( i dont have small compressor) and actually it worked! I cleaned all the pipes from the start to bottom like you in the video. Thanks for the video and help!!!
@SAMUELDIY5 ай бұрын
Glad to help, Thank you for sharing
@franckkarsentyguitare81575 ай бұрын
Excellent 👌
@SAMUELDIY5 ай бұрын
Thanks a lot 😊
@juanalvitez10545 ай бұрын
Hi. Good tutorial. Tell me this only works fpr Super Console X Pro? Or also for the Super Console X? Thanks I have a Super Console X but I lost my sd card .
@SAMUELDIY5 ай бұрын
Thank you, I have only super console x pro and I made the img file from the sd card that came with it, I do not have the non pro version to test. I guess what harm could it be to try it on the non pro version, but if you try keep us posted if it worked or not, ,🤞
@juanalvitez10545 ай бұрын
@@SAMUELDIYHi thanks. !!! You are the man!!! Works fine in my Super console X. So its not only for x-pro. I am trying for days to fix mi sdcard following those chinese tuturials with disk genious included software and I could not. Until I found your video. Thanks
@SAMUELDIY5 ай бұрын
It gives me greatest pleasure to see what you wrote and that you managed to use this video to recover your sd card even that it is not the pro version.
@hnysingh53995 ай бұрын
itunes is not showing my backup now
@SAMUELDIY5 ай бұрын
I am not sure what are you saying here exactly since the video explain how to fix a problem that is prior to creating a backup means it is not letting you to make a backup because there is no disk space on the computer, so what exactly happened to you and how did you try to fix it?
@franckkarsentyguitare81575 ай бұрын
What time it is please
@franckkarsentyguitare81575 ай бұрын
New way to practice archery wonderful
@SAMUELDIY5 ай бұрын
to practice at home 😎
@mrtechnyix5 ай бұрын
this not resolve Mop has not ben installed.. Update: need order map and watertank combinated sensors.. in aliexpress aprox 5-12$
@SAMUELDIY5 ай бұрын
thanks, the mop has not been installed is a different problem Try to verify all the contacts are positioned correctly and that there are no abstracts between the vacuum and the mop assembly
@SAMUELDIY5 ай бұрын
So one month and 1500 kilometers after, checked and not even 1 psi got loosed yet.