3 ай бұрын
4 ай бұрын
11 ай бұрын
Пікірлер
@hopkan002 Күн бұрын
Straight to the point. Love it!
@Marquez_0607 3 күн бұрын
Full video?
@IWISS 8 күн бұрын
Thank you for sharing our products.❤
@andydhillon1977 9 күн бұрын
Whoa! Great job! I admire your dedication to finding the issue! Especially since so many of us ate terrified of electrical work!
@YogisGarage 8 күн бұрын
Thanks Andy! Always glad to know you’re watching. ✌🏼
@andydhillon1977 8 күн бұрын
@@YogisGarage I really enjoy your content. You're pretty funny naturally, too!
@beerwrenchgarage 9 күн бұрын
Dude - Yogi! What a phenomenal video. Excellent job! Glad you were able to find and fix the issue.
@YogisGarage 8 күн бұрын
Thanks man! It’s been nuts.
@donesper2070 9 күн бұрын
A psy of relief and a sense of accomplishment, no doubt, good work
@YogisGarage 8 күн бұрын
Thank you, sir. It was satisfying to resolve the issue. Now I got a friend’s turbo needing help with a SAI issue. Good experience!
@vaheantanesian1684 9 күн бұрын
Hi there I have a 4.0 liter project Do you have any suggestion about using a higher capacity injectors? Did you use the original 3.6 liter injectors or you used higher capacity injectors?
@YogisGarage 8 күн бұрын
I haven’t personally done it, but my Turbo has larger injectors and a custom tune and that was on a 3.6. Certainly doable with these cars.
@knowledge5106_ 12 күн бұрын
Trying to watch the full video because I need to do this job. Can't find it on your page
@YogisGarage 12 күн бұрын
I think I rolled it into a Merc video.
@YogisGarage 18 күн бұрын
Special thanks to @iwisstools for sending me these awesome tools. ❤🔥
@youbrowsing 21 күн бұрын
Can I pick you brains for my Audi Q7? I'm in Pearland and need help finding a knowledgeable and honest mechanic.
@andydhillon1977 23 күн бұрын
Good tip!!
@rude_people_die_young 23 күн бұрын
Not quite sure how making it shiney on the outside made it suddenly start charging the battery again? My wife left me because I used her toothbrush :)
@emilio5737 Ай бұрын
Ridiculous from the very start. Be serious without the circus!
@ferroavapor1043 Ай бұрын
Hey friend, where can I find the stickers to peel? Best Regards
@lejohnbrames Ай бұрын
what strut bearing did you use ?
@ardadincsoy5809 Ай бұрын
😂😂😂, soo, you put Cataclean into fuel tank and Oil Pump broke down, right?
@bertharris9748 Ай бұрын
Alarm the car and it will go into sleep mode and the battery won’t go dead FI> Thanks
@danielfiore8865 Ай бұрын
Cataclean pays people and has bots that comment in all vee-hickle forums.
@b19jrm Ай бұрын
10-15 strokes is all it takes
@JosephWalsh-b3m Ай бұрын
Question: When you removed the hydraulic pump were you able to tell if the plastic reservoir that holds the fluid is detachable from the metal upper pump part? It looks like there is a water hose clamp holding the plastic reservoir to the pump. I can see crud in my reservoir and I'd like to get it all out. Not sure you can do that simply by turning the pump assembly on its side. Any comment/thoughts would be appreciated. Joe
@YogisGarage Ай бұрын
Hey Joe, yes you can. Good luck!
@robertlefeuvre9404 Ай бұрын
Real stupid beginning to video. If you want people to watch your videos, get to the point.
@donesper2070 2 ай бұрын
Yeah, thats what I thought, faulty micro switch, kudos for finding a direct replacement switch saw you posted this on Rennlist
@jamesfearn 2 ай бұрын
Great fix!
@texsquirrel213 2 ай бұрын
What a great deal!
@paulreese1291 2 ай бұрын
Just great! Who would have thought that a two-dollar part is worth big bucks? Thanks for sharing!!!!!
@YogisGarage 2 ай бұрын
So glad you found some use! Always happy to make things easier for others.
@The_910 2 ай бұрын
Great video! I think this is going to fix my passenger window issue too. Thanks.
@YogisGarage 2 ай бұрын
Great to hear I could help!
@MOTORSPORTOBSESSIVE 2 ай бұрын
thanks again
@andrebrown8792 2 ай бұрын
I just went through this on my 996. That black plug is for the MOST system in the original radio setup, where the original amp was located. Are you rear speakers hooked up and working now?
@YogisGarage 2 ай бұрын
No because that would require an 8-channel amp. The dash is on channels 1-4, doors are 3+4 and sub is using ch 5+6
@andrebrown8792 2 ай бұрын
@@YogisGarage I have my system wired as the the dash speakers as 1 channel each; the crossover splits out the proper signal to the mid and the tweeter. So my dash speakers are channels 1 and 2, the rear speakers are channels 3 and 4. The lower door subs and stand alone sub are in series a separate channel 5. Sounds great.
@ivanvega2821 2 ай бұрын
Awesome series, thank you for the posts. Could you provide what manual you were using to get this bottom end squared away? Cheers from Smyrna, Tennessee!
@YogisGarage 2 ай бұрын
Hey thanks for the kind words! I got the manual from emanualonline dot com. Be careful because often times they have to sell you the manual in a virtual machine to get it to work. For the Audi they send me Windows XP as well so I could boot it up. lol
@samhua4451 3 ай бұрын
Excellent video Yogi! I have been struggling to fix my 1999 996 cab top, replacing hydraulic cylinders recently, and couldn’t find any documentation about the order of the 3 copper gaskets between the hose caps. You are the only one that mentioned the order hey are placed! TY! I have 1 question: when my top opens now, it tends to jerk toward the end when it reaches the back cavity. It used to be very smooth folding. Any idea why?
@YogisGarage 3 ай бұрын
As a matter of fact I just noticed that on mine today. It’s like it stutters as it’s going down. Be sure to top off your fluids and check for leaks. That’s what I plan on doing. Good luck. DM me on Instagram and let me know.
@YogisGarage 3 ай бұрын
Finally doing something about the wheels and suspension!
@paulludwig5362 3 ай бұрын
Nice! Ohlin's are really great dampers. And no wonder the ride is 'sharp': you've got all those monoball suspension parts! It's a serious track suspension. Great color on the wheels. Very classy.
@YogisGarage 3 ай бұрын
Thanks Paul. Yes the previous owner wanted a "Canyon Carver" and that's what he got. Spent over 25K on it. It's just not enjoyable anywhere else like city streets. It's better now. Still more tweaking.
@kylepawelczyk163 3 ай бұрын
I’m rebuilding the same motor, can you please share with me the torque specs? Or the source you got them from?
@YogisGarage 3 ай бұрын
Hey thanks for stopping by. I would say that every bolt is torqued to the standard amount based on size. That information is easily available with a google search for torque specs by bolt diameter. Now for cylinder head bolts, or any other that require torque to angle, I used emanualonline. Good luck!
@VaporEG 3 ай бұрын
Align the point of the Porsche logo with the stem
@YogisGarage 3 ай бұрын
yeah you're right. I totally spaced out about that. I'll do it when I repaint the calipers.
@gregoryfranks7347 3 ай бұрын
do an HRE same color center cap!!!
@gregoryfranks7347 3 ай бұрын
thank you you for following your obvious good taste. on paper met. blue with red guts I would think it could be vomit inducing but no its actually so tasteful and you obviously knew the anodized red wheel were more clown car. now its weapons grade. I have totally come around 180 degrees to believe the 996 is as attractive as any 997. im the curator of my brothers 17k 1997 993 turbo which is great but the performance that can be had is so much greater. I've been a 911 turbo fanatic for all my 50 years. I believe I said I want a 930 turbo as my head exited the womb. I said I'd never buy a cab not a early 80's Carrera and no f-ing way a turbo. now these days I'd love a cab. I'd sell my kidneys for your car. its just unique the spec is awesome but it a 996 cab and its one of my favorite turbos ever. great car my friend and again thank you for adjusting the wheel issue. they now look spot on. cheers
@YogisGarage 3 ай бұрын
Thank you for taking the time to write such a thoughtful comment. I'm a huge fan of the 993 and the Turbo is my unobtanium. I'm with you on the cab. I just don't like people staring at me, so with that and the clown wheels I felt like I was in the spotlight. Now, the car looks modern and classy. The cab just tops it off. This car screams and to hear it all makes me smile every time. All the best! ✌🏼
@gregoryfranks7347 3 ай бұрын
@@YogisGarage thanks for having such a killer car and taking the time to respond. That's very cool
@andrebrown8792 3 ай бұрын
Gold and blue looks sharp!!!
@exocarfamily2777 3 ай бұрын
Awesome
@2philly7venz 3 ай бұрын
I just picked my 09 997.2 from the shop it was in since January. Right rear hydraulic motor failed during operation, but the driver side did not, causing a complete catastrophic failure of the mechanisms of the top. The top itself didn't require replacing despite the twisting effect it suffered, but everything else was seriously damaged. I was quoted $14k plus at the dealer. My guy straightened it out for $7300. All but the slight bend in the rear passenger side of the clamshell. Can a body work repair be performed to straighten out a clamshell? Super video bro and thanks in advance for any advice. Roddy.
@YogisGarage 3 ай бұрын
Hi Roddy. Both prices seem excessive however I’ve never priced a full top frame so not sure. You may be better off replacing the clamshell if it’s too bad off. Otherwise fix it and send it. Leaking will be your biggest issue. Check your local junk yards or car-part.com. Good luck and thanks for watching! ✌🏼
@Gregjohnshaftmansons 3 ай бұрын
Nice, the older turbo cars sound better than the new
@jorgeblanco-reyna568 4 ай бұрын
hey im doing a rehaul on all the gaskets and seals for the engine and had a question. where did you get the manual you used through out the video? i realllllyyyyyy need it.
@YogisGarage 4 ай бұрын
Check out emanualonline dot com. Just keep in mind they sometimes require that you load up a virtual machine to load the manual. It’s not just a print out. And if I recall, it was a windows xp machine! Good luck!
@paulludwig5362 4 ай бұрын
Well, I've always been on the fence about buying quick jacks and now I won't. The O-ring design is wrong. O-rings need side support to contain the squish. Same problem with drain plugs on CSF radiators. Too bad they went cheap. Hopefully your coilovers(assumed you have them) are easily adjustable
@YogisGarage 4 ай бұрын
They are. I’m waiting on my wheels to drop the next video but they’re fully adjustable. Thanks for watching!
@roadracenut 4 ай бұрын
Thank you so much for this video! I have owned 7 BMWs (and many other cars). I am trying to take the engine out and it seems that it is impossible. I found your video, and you came to the same conclusion. Apparently not all German automakers care about design for maintenance.
@JrgsGrg 4 ай бұрын
As a tfsi owner, we dont drive till sun sets, we drive till oil pressure sets.
@YogisGarage 4 ай бұрын
😂😂😂😎
@tracymckinley709 4 ай бұрын
You need a MaxJax!
@YogisGarage 4 ай бұрын
Totally. I think I can get a 4-poster in there as well. I jsut need to move the door opener to the edge. Thanks for watching!
@jimf5160 4 ай бұрын
check out ESCO jack stands.
@YogisGarage 4 ай бұрын
Will do, thanks Jim.
@jimf5160 4 ай бұрын
@@YogisGarage i have four with two types of tops, flat with or without rubber pads and cradles tops which fit 911 torsion bar ends, among other things.
@DaVince-GQIVI 4 ай бұрын
How come this fsi has a turbo fitted?
@YogisGarage 4 ай бұрын
Because it's a TFSI. The 2.0 comes standard with a turbo.
@GlorifyGod777 5 ай бұрын
He was a she thing😂
@youngsyr 5 ай бұрын
Yet another great video, thanks for posting!
@YogisGarage 4 ай бұрын
Thanks for watching!