▪l1nk: kzbin.infoUgkxlpLAtZOQgMVm-_2TCYcLDTRK0ulL7rIz ▪pass: 2023 good luck!

Excellent 👍

🔹link: kzbin.infoUgkxlpLAtZOQgMVm-_2TCYcLDTRK0ulL7rIz 🔹Contraseña: 2023 🔹sub for more: www.youtube.com/@Hensen1954 ¡Gracias por ver y feliz edición! ♥

Crap

This is the voice of a man who enjoys a succulent Chinese meal.☺

Very polite under the melancholy circumstances. Olde Skool.

Beautiful film about a once Beautiful country before idiots got into power!

Brilliant!

My handle wont go all the way closed, it seems to be jammed but I can’t see anything that’s getting in the way. The window holds shut but there’s a slight gap and a draught comes in. Any ideas what this could be? Thanks

Amazing 👍🏻

I bought the eBay strip and fitted it. The seal is harder and not a good at sealing the draught as the original Velux type which is softer and beds better for a draught proof seal. So spend a bit more and get the genuine article that really is more effective than these cheaper varieties would be my advice.

Hi I have connected up that system. When Throttle pressed have way down engine starts to misfire. Release accelerator and runs fine. Any help appreciated.

I have 3 big velux and 1 small velux windows. What size/width/thickness of foam strips should I buy to replace my existing foam seals ? Thanks

Moved into a new house. My pc is right under a velux window that is drafty. Just looked at the handle flap and there is little to no foam! Thanks for the video. I'm ordering some foam tape as we speak!

Superb. I'm doing that very job now on my 1933 lanchester 10 ,you were right about the spring wish I'd watched this video first ! It scared the he'll out of me when it fired across the workshop

Super helpful thanks! Made a slight difference to the decibel level as I live on a main road, cheap and easy job to do.

If you couldn't make a stable video, don't fuckin make one at all.

New SUB'SCRIBER reply please more videos god bless

Wow .. what a brilliant hack. What kind oil used for commercial ... semi trucks shocks... ❤

Excellent technology

We bought the KYS900 sauna/steam/shower direct from Insignia. Shocking build quality, one sauna heater not working out of the box, "monsoon" shower more of a drizzle, floor extremely slippery, waste pipe like tissue paper and split out of the box. Rejected and returned for a refund which we got but we have them in small claims court as they will not pay the consequential damages they are legally required to. Dreadful company, best avoided.

Honestly I wish differentials were still in this configuration. It's alot simpler and a bit more torquey than the hypoid and spiral drives.

Halo Sir, nice video. I just bought oil filled shock make "Amada Extreme" , comfort type. I think it is too soft for me. I would like to change the oil. What viscosity should I buy? I love speeding

What's under the cover ?

Hi Hensen, I have new shocks that bounced about 4 times when stopping. do you think fitting a heavier weight oil would slow the bounce down ? thanks

Thanks for your generous idea 👍

Pause at 9:36. Look on the right side of the cliff. in the guano furthest to the right, second "row" down; you can clearly see a gentleman.

make sure your relays for the ECU and fuel pump are the special Bosch ones with a diode in them else you will run the battery flat

Question sir which oil is better engine oil or transmission oil

Very helpful... Thank you😉👍

Thank you very much for leaking the secret most plumbers try hard to hide.

Nice!

Is it necessary to fuse the power to 14CUX? If so, how many amps are required?

Keep on pumping it until all the oil comes out there we go lol

You need someone holding ur camera lol

Lol

Thank a lot for this video. Can you exlplain to me how to connect the fuel pump relay and ECUplease ? I have trouble to fix it. Thanx again!

asking price ?

scary

shoqq

I had an unused one, exactly same model, kicking around my basement for years and when I came to test it, it hums but doesn't pump. The blades turn freely if pushed. I don't know what's wrong or even what the make is.

Brilliant. Thank you for this!

I always grease up the end of my drill bit and have somebody hold my shopvac nozzle up to the drill hole to catch the swarf. I refill with ATF as it swells the seals and makes it last longer. The seals for the rod allow a thin film of oil to pump by and the shock will have less oil than new from the factory. I fill them up and remove the air and just top them off and never have a problem. I TIG weld a nut to the hole and use a screw with fiber washer to seal it for next time. I top mine off about once per year.

Do you have the link you bought it from on eBay?

That weld was absolute crap, and the fibreglass work was shoddy, you've done a great job fixing it, I like fixing stuff but if you pay for something like that and can't or don't want to return it you should at least get a partial refund. I've just got an insignia small quadrant shower and noticed the weld quality looks strong enough but not professional looking, I would do better and the fibreglass also looks unprofessional but fit for purpose, so I'm going to fit it and hope for the best.

Hows the ride quality with the leaf change?

are you James? James bond Sean Connery?

Okay, I will try this. I was wondering, if 30w motor oil is good for slalom races ? Nice vid btw

Hello, this is a very helpful video! Thanks! I'm trying to find the plugs for an O2 sensor with a green little resistor plug instead of a bluebone like yours. Do you know how to identify the color code? Greetings, Aaron

Many shock absorbers are oil filled and then pressurized with nitrogen to keep the oil from aerating. Also, the best oil for a shock absorber is one that keeps viscosity in all temps. Otherwise you wind up with a shock that rides hard when it gets cold out.