7 ай бұрын
Пікірлер
@ReginaldWrinklebottom 5 сағат бұрын
Great vid 👍 said everything i like about the klr. I live semi rural where there's as much gravel as pavement.
@loops4860 5 сағат бұрын
So glad I watched the follow up video. I had just purchased a case feeder for loading 9mm when I saw the first video and thought I made a huge mistake😅
@fabiogonzalez3848 2 күн бұрын
I am struggling to remove the old one from the aluminum base. Yes, I did remove the couple screws. Any suggestions?
@SquatchReloaded Күн бұрын
It’s a very snug fit. You may break it removing it
@fabiogonzalez3848 Күн бұрын
I got it, thank you so much for your prompt response
@John-hw3ds 4 күн бұрын
I think a lot of people's eyes are bigger than their stomachs. The 450 is born from the race bike. If have never been on an MX track or lots of time on dirt I can see how people don't like it. It's got gobbs of power with very little throttle input. You really need to know how to ride an MX bike. The stalling issue is strange. The MX bikes idle pretty high and these tuned for the street are set very low. I'd imagine if the idle is turned up the problem would go away.
@REightch 5 күн бұрын
Lookin for something a lil smaller lieghter wieght than my tub. More like a pit bike. I think I may do this one or the ttr. I love putting mods too maybe a spring pipe, bars etc
@billalatalo8672 9 күн бұрын
I’m putting knobbies on mine. Packed sand is doable. It’s perfect easy jeep trail or path. Right now I’m 5 days in on OBX vaca and it’s awesome for the trails and beach roads
@dd1892 10 күн бұрын
Is the 750 capable of bench rest precision ammo? Sorry if my terminology is stupid.
@SquatchReloaded 10 күн бұрын
Depends on your definition of bench rest ammo. There is a lot of variables going on with multiple stations at once. Personally for ultra precision I lean more towards a single stage.
@homer97027 10 күн бұрын
Looking to buy the 300 Rally. Price for used is so high might as well buy new. No dealers have these things- 2 month wait time😢
@ecleveland1 10 күн бұрын
I’d like to add to your suggestions. If you get a new Dillon and after you get it set up if it doesn’t run very smooth, it kinda clucks or pops , stop and call Dillon support. Your press is out of time and Dillon will send you the correct gauge and simple instructions to fix it. I know because my press arrived out of time and nothing I did made it better. You don’t have to buy any of the aftermarket parts and accessories that claim to help your press run smoothly. The Dillon guarantee which is better than any warranty in my opinion simply is the best in the world. In over 32 years of running Dillon presses I’ve had to used their warranty and customer support twice. The first time was on my first Dillon 550B I broke a part while setting it up. Nothing was wrong with it from the factory I’m just a little heavy handed sometimes. My wife says I’m like a bulldozer and just don’t realize how strong I am.
@BigA... 11 күн бұрын
hi, i just got this exact bike but didnt pick it up yet. How do you warm up this bike up before you ride it? thank you.
@Guisousamao 14 күн бұрын
Excellent video and explanation, congratulations.
@RKDVLOGS 16 күн бұрын
Hey buddy, just wondering if the spider ST1 is waterproof as well was a lil sceptical as there were few reviews I read had issues when they rode in rain. Waiting for your response. Appreciate efforts on the video.
@SquatchReloaded 16 күн бұрын
There is no documentation that it is water proof that I can find. I have rode in the rain without issue however I would assume if SEnA doesn’t add it to there documentation then it probably isn’t
@RKDVLOGS 16 күн бұрын
@@SquatchReloaded thank you for your response
@LulaPlays 17 күн бұрын
my left ear only liked this video...
@SquatchReloaded 17 күн бұрын
Issue with my stereo
@LulaPlays 17 күн бұрын
@@SquatchReloaded haha i'm just messing with you. Sena has some good prices on these right now and I get 20% for military discount...so 279 shipped...it is TEMPTING.
@LulaPlays 17 күн бұрын
but then I am torn between should I just get the Outrush for 160 before discounts...makes me wonder if the Stryker is really worth $190 more?? I know the Stryker has a FAR SUPERIOR comms system
@SquatchReloaded 17 күн бұрын
The Stryker is nice however having the ability to change helmets is also a plus
@LulaPlays 17 күн бұрын
@@SquatchReloaded hmm can you please explain what you mean by change helmets? Like taking it on and off easily? Maybe I do not know about a certain feature on the Outrush.
@brickmonke56 18 күн бұрын
is there a small wheel?
@SquatchReloaded 17 күн бұрын
Yes
@mario3804 18 күн бұрын
Brother great video lots of great tips, hope all is well.
@314adv 21 күн бұрын
For the first month your nick name will be StallingSquatch. 😂 / Everyone that test rides my back stalls it like 5 times when they try to get going.
@SquatchReloaded 20 күн бұрын
Road lots of Mx bikes in my life and it’s pretty normal to me. Definitely not a noob dual sport
@314adv 20 күн бұрын
@@SquatchReloaded - I love the bike. I have 23,500 miles on it. Single track, woods, gravel, and multi day camping off it. Getting ready for an 8 day 1,600 mile motocamp trip on it up in New England area.
@kraftfamilyadventures2100 22 күн бұрын
Very informative video.
@user-tj5tu4fo5c 23 күн бұрын
I have got to believe that your full time job is as an instructor somewhere. Excellent presentation and make's learning my XL 750 much easier. Thanks Bob Sisson U.S. Navy Ret.
@isaacmettle 23 күн бұрын
Can’t WAIT 2 GET MINE
@sandrider1406 25 күн бұрын
The bike isn’t twitchy. I have just come from a Husqvarna FE501 and the Honda performs the same as that. It’s all about control.
@Slasherx28 25 күн бұрын
Best video. I’m looking to start with at 115 grain 9mm recast bullets from Missouri bullet or blue bullet. How would I know powder weight and final bullet length for measurements? Thanks!
@dmxracr9202 29 күн бұрын
What is THAT?!?! Is that like $4,000.00??? OMG
@keylorgutierrez4877 29 күн бұрын
Mi próxima bb Dios primero ❤
@jesbutchstv Ай бұрын
I like that but its expensive
@KiwiPokerPlayer Ай бұрын
You have a KLR as well? I'm trying to pick my first bike to learn on and am having trouble deciding between the CRF300 Rally, the KLR650 and the RE Himalayan 450. I'm leaning towards the KLR but I heard it's kinda big and heavy. Do you think it's a bit too big for a first bike? I'm 6ft tall and plan on taking it on gravel roads a lot and will be probably be dropping it often.
@SquatchReloaded Ай бұрын
Nothing wrong with any of those bikes. Personally I think the rally would be a great first bike. It’s very lightweight maneuvers a lot easier in my opinion than the Klr but you can’t go wrong with either.
@KiwiPokerPlayer Ай бұрын
@@SquatchReloaded Thanks for the reply man, I'm really struggling with this since I can't test ride any of them. The concern I have with the CRF is power, I live in New Zealand and we have a lot of mountain passes here, can it keep up with highway traffic on hills?
@SquatchReloaded Ай бұрын
@KiwiPokerPlayer gotcha. As far as highway the KLR is a bit better in that regard. The CRF is quite capable of holding speeds at short intervals
@KiwiPokerPlayer Ай бұрын
@@SquatchReloaded Your second sentence concerns me about the CRF, we have some steep hills that go on for a while. I have the option to buy a 2022 KLR Adventure with 1.5k miles and has already had all the basic upgrades done, proper two point metal hand/lever guards, upgraded exhaust, skid plate, crash bars and new expandable top box along with the factory panniers. They told me it's "as new, never been dropped" and the photos support that. They are asking 2/3rds of the price of a new stock '24 model with those upgrades already done. Pull the trigger?
@SquatchReloaded Ай бұрын
@KiwiPokerPlayer KLR is hard to beat!!!
@user-dp8lq5rx8z Ай бұрын
Also what GoPro are you using for this video?
@user-dp8lq5rx8z Ай бұрын
Just wondering can you explain to me what an ECU flash is? I’m new and just picked up a canam 570 XMR 2017
@charleshaguewood1040 Ай бұрын
A seat, ECU, exhaust are the first mods that are a must
@pjsiason Ай бұрын
have you experienced crushed cases on station 1 due the case moving out after case is positioned?
@brianreinert5028 Ай бұрын
Man. The bike I truly want….
@tieoneon1614 Ай бұрын
Right from factory, this is the BEST dirt road/gravel bike Iv ever ridden. Plush, planted, doesnt need trac control and the ABS actually works great. More aggressive tires would handle worse on gravel. Your front end is wandering cuz u havent adjusted your preload stiffer for your weight and u are running street psi off pavement. Drop the psi a bit and turn the preload nut to at least 3 to put some weight back on the front tire.
@Dude_Virus Ай бұрын
I am thinking of getting this one for my next comm unit. Can this be charged while using?
@SquatchReloaded 16 күн бұрын
Yea
@cw2a Ай бұрын
💥❤️🩹😝❤️🩹💥
@Yakob135 Ай бұрын
The best looking quad I’ve ever seen no contest
@onerider808 Ай бұрын
Lol, can it handle dirt roads? That’s hilarious. Mine has been over most dirt road passes in Colorado, and some reasonable singletrack. Not fast or flashy, but it’s a KLR. I love my ‘23 Adventure. Rode it at 85mph to Sturgis.
@SquatchReloaded Ай бұрын
Kinda click bait lol
@petermoygannon698 Ай бұрын
Put rear disk and make it registerable .
@Bkrraptor Ай бұрын
Had the dual empire exhaust installed on my 21 700r se. I absolutely love them
@TerrellSpivey Ай бұрын
Man...i got empire dual exhuast big 3 on the way and now im concerned about the speed senor and fender on the left. I have a 2024 700r. This was a great video tho! And i too like the heat shields that come on these! Man oh man...i hope empire changed the design for the 2024 concernng the speed sensor
@SquatchReloaded Ай бұрын
You will probably need to trim the fender on the left side I had to on mine. I ended up getting rid of the empire and went with a dual Barker system. No issues with the speed sensor because there was clearance and no trimming in the fender. Empire did offer to the pipes so they would clear the speed sensor. I don’t know if they have made that change moving forward.
@TerrellSpivey Ай бұрын
@SquatchReloaded yeah I saw the video of you putting it on which is why I made this comment! Yikes....I'm gone have to message them and see if they made a change and even talk to mechanic imma have put it all on and see if they are still running into this issue because it's not worth doing all that in my opinion especially when the barkers fits good and even has the heat shield. Man...
@TerrellSpivey Ай бұрын
I got the drw chain guide and case saver and its noisy, is yours!?
@SquatchReloaded Ай бұрын
Check your chain tension.
@TerrellSpivey Ай бұрын
@SquatchReloaded it's at it's normal tightness...does it need to be tighter than normal?
@BLINC606 22 күн бұрын
It’s not the case saver. It’s normal for raptors.
@TerrellSpivey 22 күн бұрын
I noticed noise when i first got it, but since changing the case saver and chain slide its waayy louder lol@@BLINC606
@KadenHennie Ай бұрын
I just bought one of these 20 minutes ago😂 its my first bike
@Mjr1348 Ай бұрын
I’m 62 and got the first 300l in my area in 2021. Really a fun bike on and off road. Nice vid.
@ditcka1 Ай бұрын
I do 3 hr road trips on my 300l highway rides
@BOHEMIANHUNTINGCLUB Ай бұрын
Nice job👍👍
@Danbobone982 Ай бұрын
Great video just getting started so extremely helpful thanks
@cw2a Ай бұрын
❤️🩹🙏🇺🇸🙏❤️🩹
@kentcampbell6551 Ай бұрын
I do mine exact same way. I have a big old laundry sink with a hose. For the water. Great info on the dillon powder funnel issue. I’ve had that issue brass do clean
@405TOYZ Ай бұрын
Very nice
@pete-mz9vr Ай бұрын
Rollsizer!
@lutherprice2062 Ай бұрын
Great video Squatch, i’m a fan of OCD reloading. I’ve been reloading for several years using a RCBS Rock Crusher and recently bought the Summit. Both have excellent runout but having to swap out dies is still a pain. I’ve been researching the Redding T-7 and I can’t find info on the bullet runout for this press. What has been your experience with it? I’ve used your method of processing brass and it is a winner. I’m one of those OCD guys that actually enjoys processing brass and your method takes out the guesswork of where you are in the process. Thank you
@doc72 Ай бұрын
I bought their sizing decapper die in 40 and it left several deep vertical gouges on the brass. I went back to Dillon.