hallo tolles modell gut gebaut wo bekomme ich einen bauplan her ?vg
@Paulywarp Жыл бұрын
I've watched a few videos today of similar boats and no one knows how to trim them.
@hbkandcie Жыл бұрын
Magnificent performance! I really love this song! Thanks!
@craigrockwell1 Жыл бұрын
im in build of the 52 m 172ft superyacht sportfisher by royal huisman, yachts in construction. i just use 52inches vs a scale
@craigrockwell1 Жыл бұрын
nice work, this took me a while to find when searching for rc yachts. you should put in some tags to get more exposure for your team
@TechnicsMusik Жыл бұрын
Wo bekommt man dieses Modell her?
@JK-Productions Жыл бұрын
Man muss es selber bauen.
@nguyenblong582 жыл бұрын
hi , could you share the spec of electric equipment?
@svenvonrosenbach29572 жыл бұрын
Eine wirklich schöne Yacht, mit soviel Liebe zum Detail. Welche Masse wurden für die Radarkuppeln verwendet? die benötige ich auch für meine Yacht LG Sven.
@JK-Productions2 жыл бұрын
Hey Sven, vielen Dank, das hört man gerne. Die Radarkuppeln haben 26 mm im Durchmesser und 36 mm in der Höhe. Viel Spaß beim Bauen wünsche ich dir.
@pavelkostka81892 жыл бұрын
Good day. Where can you get such a hull plans or buy a hull. Beautifully.
@JK-Productions2 жыл бұрын
I bought the hull from "marinetic-yachtmodell.de". Unfortunately, the hull is no longer offered there. There are no plans. I drew all the plans myself after doing a lot of research.
@ngoprekmania1122 жыл бұрын
Please plane
@larsjanek87532 жыл бұрын
Wir hatten auch mal welche
@johnrobinson11402 жыл бұрын
Meine deutsch es nicht sehr gut, aber das boot , wunderbau!
@GUASILOSTYO3 жыл бұрын
NICE Video I've been looking for a boat for months and now I definitely want to have that really nice and harmonius boot
@BanyakHobiBandarLampung3 жыл бұрын
amazingly similar to the original
@BanyakHobiBandarLampung3 жыл бұрын
how do you do it if I want to buy the rc yaht
@JK-Productions3 жыл бұрын
Hej, thank you for your comments and your praise. Sadly I have to disapoint you. I‘m not even thinking about to sell it. I love her to much to give her away.
@BanyakHobiBandarLampung3 жыл бұрын
@@JK-Productions thank you for the information, greetings brotherhood
@BanyakHobiBandarLampung3 жыл бұрын
present from Indonesia
@SonnetGomes3 жыл бұрын
Beautiful boat, but why the rudder? You could have easily used twin prop with differential thrust to steer the boat. I will be building a Sunseeker Predator 62, and I am also thinking of how to go about the propellers. I am glad I wont have to deal with Servos and Rudder, but twin ESC will be a headache for sure.
@nicolasdibiase14123 жыл бұрын
Where Can I buy it?
@CarsonHeli4 жыл бұрын
Wunderschönes Boot mit stimmigem Fahrbild!
@geraldhaller99064 жыл бұрын
Ein super Modell mit extrem viel liebe zu den Details gebaut mit vielen unzähligen Details und alles super beleuchtet , einzig was ich persöhnlich sehr schade finde ist die umsetzung des Antriebes soweit ich informiert bin hat das Original Boot zwei oder drei Oberflächen Antriebe mit zwei bzw drei Motoren und das wäre das I Tüpfelchen gewesen wenn das Modell auch drei Oberflächen Antriebe bekommen hätte was mit Sicherheit der performace gut getan hätte . Besonders bei schweren Modellbooten ist es vorteilhaft zwei oder gar drei Propeller zu haben weil so recht einfach der Schub erhöht wird ohne riesige Propeller zu nutzen und hohe Drehzahlen . Grade ein dreifacher Antrieb ist noch sehr selten im Modellbau aber gut machbar , ich selber habe gute Erfahrung damit gesammelt. Mit meinem Modell der 90er jahre Offshore Rennjacht von Fabio Buzzi die legändere "Fiat Uno " die im Original drei Diesel Motoren hat die auf drei Oberflächen Propeller wirken , das habe ich nachgebaut mit drei BL Innenläufer 3650 2450KV die jeweils einen Oberflächen Prop antreiben . Im ersten versuch hatte ich die kleinsten Propeller gewählt die ich hatte( 29mm x 1,4 ) und war angenehm überrascht wie schnell das Boot ins Gleiten kahm und über die beachtliche Geschwindigkeit von ca. 50 Km/h und das mit einem 3s Lipo pro Motor was auch sehr überraschend war ist das ein Akkusatz locker 20 min reicht bei hohen Vollastanteil . De gleiche Motor Propeller Kombination an einem kleineren Boot mit nur einem Motor hatte keinen Erfolg gehabt obwohl das kleinere Boot nur ca.1/4 des Gewichts hatte wie die Fat Uno und insgesammt nur halb so groß war mit ca. 50cm länge .
@JK-Productions4 жыл бұрын
Vielen Dank für den ausführlichen Komentar. Würde ich sie nochmal bauen, würde ich auch auf zwei Wellentunnel oder drei Oberflächenantriebe setzen, so wie beim Original. Vielleicht baue ich sie auch irgendwann mal um. Von der Power her ist sie allerdings mehr als ausreichend dimensioniert. Die Motorleistung ist auf 60% gedrosselt wenn sie scale Geschwindigkeit erreicht hat. Es steht also noch mehr als ausreichend Reserve zur Verfügung.
@rcboatenfiberglassrcboat75244 жыл бұрын
Je voudrais aussi terminer mon yatch presque comme un ça. Je sais que ça demande beaucoup de travail. kzbin.info/www/bejne/d3TbXnaGYpWEaK8
@MrBoat-fd6br4 жыл бұрын
Super!
@MrBoat-fd6br4 жыл бұрын
So stelle ich mir Modellbau vor. Super Video, schön gebaute Yacht!
@MrWilliamsWalter4 жыл бұрын
How much would you sell one for?
@JK-Productions4 жыл бұрын
I do not sell the Yacht
@Ittigoesmovie4 жыл бұрын
...ich bau sie auch gerade..mit RC..fast fertig!
@JK-Productions4 жыл бұрын
Auch auf Basis des Marinetic Rumpfes?
@fuchsi74054 жыл бұрын
Respekt ich selbst baue gerade die von Revell und bin dabei meine komplett eigene Yacht zu Zeichen und zu bauen
@JK-Productions4 жыл бұрын
Vielen Dank ;-) Die von Revell habe ich auch gebaut. Natürlich auch in RC Ausführung. Muss sie aber noch ganz fertig bemalen. Ich würde mcih über Fotos von deiner eigenen Yacht freuen.
@thaolocatelli4 жыл бұрын
Bonjour, Super réalisation !!! Je suis fan ! Les lumières sont top ainsi que les fonctionnalités ! J'aimerais tant avoir le même… Je vous envies !! Combien de temps avez vous mis pour faire se magnifique bateau qui est mon favoris ? Comment avez vous eu les plans ? Pendant ce temps là, je fais un bateau de 1,15 m de long mais j'ai bientôt fini !!!!!! Bravo pour cette réalisation PS : Comme vous avez vu, je suis fan de bateaux ( voir ma photo de profil ) et particulièrement des Sunseeker Predator 108 !
@JK-Productions4 жыл бұрын
Hi, thanks for the compliment. I worked over 600 hours on it. There are no plans. Only pictures on the internet and the plastic model kit from Revell in 1/72nd scale (which I also built as RC model). Good luck with your model.
@thaolocatelli4 жыл бұрын
@@JK-Productions Thanks you very much !!! You have a verry good patience !!!
@thaolocatelli4 жыл бұрын
Hello, Did you took the Grand Azur 29 meters rumpf from Marinetic yacht modellbau ?
@JK-Productions4 жыл бұрын
Thao LOCATELLI No, it’s the Sunseeker Predator 108 Hull. I don’t know if it is avaiable anymore 🤷🏼♂️
@thaolocatelli4 жыл бұрын
@@JK-Productions ok thank you very much. I think i found it but I can't go on the website because of the coronavirus ...
@ModellbautechnikSalzkammergut4 жыл бұрын
Wie lange war die Bauzeit?
@JK-Productions4 жыл бұрын
Models in Austria 600+ Stunden
@BrunoSilva-os6kv4 жыл бұрын
Como faço para adquirir um para mim montar ?
@JK-Productions4 жыл бұрын
Hello, and thanks for the comment. I translated your message but im not shure if I understood correctly what your question might be. May you ask in english again?
@BrunoSilva-os6kv4 жыл бұрын
@@JK-Productions thanks for returning me, first congratulations on the beautiful work done with this RC, my question was? how do I get a project like this for myself to execute, because I realized that the base is like a kit to go putting together the rest is this or am I wrong? if you can help me thank you
@JK-Productions4 жыл бұрын
WBS BRASIL The Hull is from marinetic, as you can see in the video Description. All of the Rest is Build and constructed by myself
@hamilton_reacts4 жыл бұрын
An English comment passing by.
@MrWilliamsWalter4 жыл бұрын
Lol wish i knew where to buy one from
@hamilton_reacts4 жыл бұрын
@@MrWilliamsWalter same...
@MrWilliamsWalter4 жыл бұрын
Not the same. But a nice model www.lindinger.at/en/cars-trucks-und-boats/models/boats/robbe-st.-tropez-ii-luxury-yacht-artr
@shelbyvehuit45644 жыл бұрын
très belle réalisation!!! bravo
@JK-Productions4 жыл бұрын
Merci beaucoup, je suis heureux si vous aimez mon travail.
@shelbyvehuit45644 жыл бұрын
@@JK-Productions je suis entrain d en construire un en 2.60m de long
@JK-Productions4 жыл бұрын
@@shelbyvehuit4564 Oh, c'est énorme. Bonne chance
@shelbyvehuit45644 жыл бұрын
@@JK-Productions si tu as messenger je te partagerai les photos...
Tolles Boot! Es sieht sehr groß aus! Was sind die Dimensionen? Hast du es selbst gemacht?
@haitang90334 жыл бұрын
Quá đẹp cho một cuộc tình. Ở Việt Nam không sao có được bản vẻ để trải nghiệm
@JK-Productions4 жыл бұрын
Thật là xấu hổ khi nghe. Tôi hy vọng người dịch đã dịch nó một cách chính xác.
@johndonovan70185 жыл бұрын
single prop? smh
@JK-Productions5 жыл бұрын
yes
@johndonovan70185 жыл бұрын
@@JK-Productions but why friend. you should have gone twin waterjets. there are some real nice options that are retrofitted into the long gone graupner moonraker.
@JK-Productions5 жыл бұрын
@@johndonovan7018 I had my reasons when i build it, but if I would build it again, i would do it with two props for shure.
@SchakkasRCGarage5 жыл бұрын
Schöne Yacht, mir kommt sie etwas zu steil aus dem Wasser bei mehr Schub.
@JK-Productions5 жыл бұрын
Das war ja auch eine Testfahrt, ist mitlerweile behoben. Auf meinem Kanal gibt es weitere Videos über die Yacht.
@diyhometheaterguy6 жыл бұрын
Great build. What kinds of leds did you use? Do you have a lighting plan you would be willing to share?
@JK-Productions6 жыл бұрын
Thanks man! All LED's, are 3 or 5mm LED's. The white lights are flathead LED's. There is no lighning plan on paper. The plan is just in my head, but I combined 3-4 LED's in a row with an protective resistor, to usw the ~12V from my 3S LiPo directly.
@eyekatcher016 жыл бұрын
Wie hast du den Boden so gut hinbekommen? Ist das eine Folie oder so?
@JK-Productions6 жыл бұрын
Hey, den Boden kann man bei Aeronaut (glaube ich zumindest, das es dort war) kaufen. Also einzelne leisten, die man dann anpassen muss.
@尹泓傑6 жыл бұрын
Where did you buy it?
@JK-Productions6 жыл бұрын
I only bought the hull at "marinetic.de". The deck and all the other parts were built by myself. I had only a bunch of photos.
@antonberger12336 жыл бұрын
Wow, cooles Modell und toll gebaut!
@ralfteschner71116 жыл бұрын
Tolles Boot. Tolles Video. Ich mag ganz besonders das Fahrbild und die Deko und Figuren.
@salzkammergutfan10026 жыл бұрын
Sehr gelungenes Video. Danke
@JK-Productions6 жыл бұрын
Danke auch :)
@benek.72426 жыл бұрын
👍
@sirschengler31657 жыл бұрын
cooles video :)
@benek.72427 жыл бұрын
👍
@samuelschmidt357 жыл бұрын
Wundert euch nicht wegen der eher mangelhaften Musik das Projekt wurde schon einmal hochgeladen und wegen der Musik gesperrt :(
@JK-Productions7 жыл бұрын
Das ist richtig, damals hat man es halt mal probiert...
@samuelschmidt357 жыл бұрын
Das Beste ist, ich habs mir damals runtergeladen, auf meiner SD ist jtz ein hochwertiges Video. Eine Frage, sind sie der Ersteller der Roboterarms?
@JK-Productions7 жыл бұрын
Samuel Schmidt Ich habe es auch noch als HD Version, es fehlt nur die Lustund die Zeit es neu zu schneiden und neue Musik darunter zu legen. Ja, ich bin der Konstrukteur des Roboters.
@samuelschmidt357 жыл бұрын
Entschuldigen sie, ich meinte ob sie den Roboter konstrituiert haben :D
@andreasbuttner-land18907 жыл бұрын
Perfektes Video! Tolle Aufnahmen!
@blackforestspicybbq67487 жыл бұрын
Wo gibt es den Rumpf ?
@JK-Productions7 жыл бұрын
Bei Marinetic Yachtmodell. Kann ich nur empfehlen. Die Qualität und die Verarbeitung ist klasse. Hatte nur Freude damit ;)
@RCFunAction7 жыл бұрын
Schöne OnBoard Aufnahmen! Ja, der Badweiher Hock ist immer eine Reise wert:)