Hey, great build. I'm interested in the lower oil pan if it's available. Located in NY 13669.
@jp_vlogz2 ай бұрын
Such an awesome program! 🔥🦅🇺🇸
@johnserrata53462 ай бұрын
Gotta do upgraded cams and E85 theres some guys pushing up to 400 on E with cams and HR heads Didnt see you had the tomei cams till later in the vid. Shits gonna be sweet keep at it
@mrmellfpv2 ай бұрын
What’s the difference in repeated e brake pulls and on long pull? How do you use them differently
@CHARGEHARD2 ай бұрын
Its honestly became habit and isn’t as necessary on a smaller track like OSW unless you have a lot of speed, but repetitive handbrake pulls helps prevent your tires from getting flat spots. I learned this the hard way at GridLife 2023 in South Carolina, when I entered on the long straight, holding the e-brake in the same position for the majority of the entry to scrub speed, felt like I was driving on square wheels 😂😂.
@mrmellfpv2 ай бұрын
@@CHARGEHARD 🤯didn’t even think about that side if it
@tideshiftvisual2 ай бұрын
Definitely get a good scan tool on there as there could be codes. Something could be pulling timing. My vq had a knock sensor code that never showed up on my regular scan tool, but another tool showed knock sensor code and it constantly pulling 5 degrees of timing. Otherwise a compression and leakdown test would be a good idea. I just am more leaning towards that being an ecu or sensor problem rather than the engine being actually tired.
@CHARGEHARD2 ай бұрын
Definitely some good points! After the fire I made sure to throw only OEM sensors on, (knock sensors, throttle bodies, cam sensors, coils, etc…) but wouldn’t be surprised if one of them were faulty already. I’ll check back in when I can find a good scan tool!
@tideshiftvisual2 ай бұрын
Hr/vhr hybrid is best. Stoked on this
@CHARGEHARD2 ай бұрын
Im stoked you’re stoked! I hope you enjoy the series brotha! 🤝🏼
@Prolbuilds2 ай бұрын
Nice job, FREE HP! This is on my long list of things to do. lol You definitely feel the difference when you do a port job on the intake.
@CHARGEHARD2 ай бұрын
Most definitely! Always a highly recommended mod you can do with minimal experience.
@jp_vlogz2 ай бұрын
This a cold ass build!! 🔥🔥🔥
@CHARGEHARD2 ай бұрын
It better be because I’m tired of the car getting hot 😭
@jp_vlogz2 ай бұрын
@@CHARGEHARD 😳🥹😭
@mrmellfpv2 ай бұрын
No Change in wiring? Just need a tune?
@CHARGEHARD2 ай бұрын
Not for an 07-08 350z. If the car came with an VQ35HR, you can use the same factory harness. If the car came with a VQ35DE, you would need to switch to an HR harness. Followed by a tune, yes. Due to the additional change in stroke & camshafts in my situation.
@mrmellfpv2 ай бұрын
@@CHARGEHARD so a HR in a de-car will need a harness swap too and probably ecu/tune?
@CHARGEHARD2 ай бұрын
@@mrmellfpv Harness, ECU, and tune, yes. Also most likely the small bits like a HR speedometer, and HR transmission since the bellhousings are different to my knowledge.
@roosterfpv36542 ай бұрын
Keep em coming bro
@CHARGEHARD2 ай бұрын
Always brudda! Thank you for the continued support as always 🫶🏼
@nickwhitt60012 ай бұрын
You the man !!! I’m literally doing the same thing haha
@CHARGEHARD2 ай бұрын
Can’t wait to jam out in the same cars! 😂🤝🏼
@nickwhitt60012 ай бұрын
@@CHARGEHARD Me either brother!!
@MarosVette3 ай бұрын
love the video man, keep it up brother
@kylesigner27043 ай бұрын
I'm glad you finally started your yt channel bro!
@CHARGEHARD3 ай бұрын
You were one of the few that encouraged me to do so! So happy you enjoy the content so far! ❤️🔥
@kylesigner27043 ай бұрын
🎉🎉
@lifenogarage76853 ай бұрын
Charge me hard papi
@mrmellfpv3 ай бұрын
👋🏽😂
@CHARGEHARD3 ай бұрын
Follow these rules & your car should start with a key 🤣
@mrmellfpv3 ай бұрын
@@CHARGEHARD 😂😂💀💀💀
@seajayefpv89683 ай бұрын
Sick video man sorry I was slacking on getting the fpv videos over to you I need to get quicker with that for you brotha
@CHARGEHARD3 ай бұрын
Don’t apologize for being the best! You’re a busy man. I just have to upload a little slower 🤣
@mrmellfpv3 ай бұрын
Love the minimal steering corrections. Great driving
@CHARGEHARD3 ай бұрын
Always trying to be more consistent! Thank you for the love!!
@Wowtryit3 ай бұрын
Yeah that’s my dawg good video looking foward to the next one.. keep it up brotha
@CHARGEHARD3 ай бұрын
You already know! Thank you brotha!
@jesicamorse37603 ай бұрын
Great footage 🔥🔥🔥 such a good time
@cathyduncan25203 ай бұрын
🔥🔥🔥🔥🎉🎉🎉🎉Gooooo Crizzy!!❤❤
@seajayefpv89683 ай бұрын
Suuuch a sick video man so stoked to have you out there
@roosterfpv19303 ай бұрын
Killin it bro!
@mrmellfpv3 ай бұрын
Notifications ON ASF
@jp_vlogz3 ай бұрын
Ye!!!
@TaxiGarage3 ай бұрын
So much good vibes
@mrmellfpv3 ай бұрын
The JP wink when it turned over got me DED!😂
@CHARGEHARD3 ай бұрын
🤣🤣 Mans always loves when he right
@mrmellfpv3 ай бұрын
🔥car broskie!!! Great video!!!
@cathyduncan25203 ай бұрын
🎢👍🙏💯💯💯❤️❤️🔥🔥
@cathyduncan25203 ай бұрын
💪💪🔥🔥🥰🥰❤️❤️🎉🎉💕💕🎊🎊🙋♀️🙋♀️
@cathyduncan25203 ай бұрын
😂❤😂❤🎉🎉Love it!!🔥
@cathyduncan25203 ай бұрын
Woooowwww!! Fiirrrreeee🔥🔥🔥🔥🔥🔥🔥🔥🔥
@CarFemme3 ай бұрын
Ouchhhhh that sucks
@CHARGEHARD3 ай бұрын
We back better than ever now!
@jp_vlogz3 ай бұрын
Gahhhhh dayumn!!! Cut it up!!!! 🔥🤝
@Camelstyle3 ай бұрын
Great Vlog!!!!!!
@CHARGEHARD3 ай бұрын
Love! ❤
@thecurs3dcreator5894 ай бұрын
I've done this on my car😅.
@ILLSMOKQ-xs6qs4 ай бұрын
😂 oh man this is spot on
@Fire-lt8nu4 ай бұрын
How long it took to build that?
@cathyduncan25203 ай бұрын
🎉🎉Gooooo Crizzyyyy!
@4gummi7519 ай бұрын
Just got outta my 2nd misfire attack, damn coils, but atleast i got the tune when i was there too😂