The dealership guy told me to wait 4 days, dont do a reset, wait and see he said. Gas cap loose = need to reset the car CPU, seems BS.
@tonyd43465 күн бұрын
I have had no problems with it for two years now. I also don’t put a “ton” of pressure on it. Define a “ton”.
@fortwarrmi13 күн бұрын
Dammit, it worked! Thanks!!!
@Platoface13 күн бұрын
I had ALL my dashboard icons come on AND EYESIGHT off… and yes, did the same thing and it fixed the issue. Can you imagine how much a dealership would have tried to get out of someone?
@cherylbarnes356216 күн бұрын
This is good information. We need to do this.
@diyorbust84215 күн бұрын
I found that if you use the higher pressure settings, you minimize waste and runoff. The rinse setting uses too much water/cleaner. Especially since this is a bleach solution which could be harmful.
@lei150921 күн бұрын
I have tried powering off the entire car. The problem goes away the first time I start it, but reappears the second time I start it.
@richardwhite467822 күн бұрын
This was incredibly helpful. Even after 8 years! Thanks for posting!
@Andy44Andy29 күн бұрын
FYI - In future one small suggestion- use one short wood while compressing to keep strut straight like 90 degree. And other one long wood along floor jack and tie wood at top using rope with strut so when removing strut it doesn’t spring backwards(expand) all of sudden and then floor jack to release the spring pressure.
@diyorbust84210 күн бұрын
Great suggestion! Hopefully these last long enough, so I don't have to do it too soon.
@Andy44Andy29 күн бұрын
What brand struts did you use? I’m not happy with either OEM. Nor lucky on aftermarket(TRQ) one. Appreciate your feedback on what did you use. ACURA struts are too soft. Poor quality spring by OEM in my opinion. Or it may be just me.
@diyorbust84210 күн бұрын
These FCS from Rock Auto. They are more spongy than I would like, but I don't think they make an aftermarket strut that will satisfy our needs. KYB didn't have one for the 2015 MDX.
@reeupp1257Күн бұрын
@Andy44Andy - what made you dislike the TRQ brand struts? Was it noisy? Reason why I’m asking is because I just ordered a set and don’t want to be disappointed when I put it in.
@reeupp1257Күн бұрын
@@diyorbust842how’s the ride with those struts? I’m looking for a softer ride so I don’t mind it be mushy. Also great vid btw. Glad you didn’t cut out those mishaps so I know what to encounter when I do them
@diyorbust84223 сағат бұрын
So far so good. 6 months
@Andy44Andy29 күн бұрын
Thanks for putting my verbal into great video.
@diyorbust84210 күн бұрын
Thanks Andy!
@Andy44Andy29 күн бұрын
Also you could use something to tie around wood at and strut to keep together.
@Andy44Andy29 күн бұрын
Use folded thick cloth under the wood on knuckle towards brake rotor side to prevent wood sliding to have upward slope. Thanks for making this video.
@u.u.u9969Ай бұрын
Or just cock everything
@philliphall5198Ай бұрын
Replacing the springs every 5/7 years is best for dependable service 😊
@76StarshipАй бұрын
Nice work.
@Sphinx5779Ай бұрын
It worked. Thank you.
@diyorbust842Ай бұрын
Haha. I did get lucky, but I did it on both sides, and the other just took a little bit of persuasion. I would do it this way every time vs. trying to smack the knuckle apart.
@towerh6680Ай бұрын
I actually saw that comment you referred to about someone explaining this way and thought "darn wish there was a video of that" haha thanks for making this! Not sure if Im going to take this route though...looked tricky. You got so lucky when it fell in 😂
@diyorbust842Ай бұрын
Light stayed off. Totally fixed and back to normal 2 weeks and 2k later.
@lars28942 ай бұрын
Try Go Brewing, Best Day Brewing, Untitled Art, WellBeing, as well as imports from Germany and Poland. Way better than anything from Athletic or macro breweries. ProofNoMore has a good selection of you live in the US.
@diyorbust842Ай бұрын
Thanks for the recommendations. I will give those a try and do another video.
@josemopar7082 ай бұрын
Is there any update on this? Did the lights come back again?
@diyorbust842Ай бұрын
Light have not come back on. Permanent fix for sure.
@chrisingram72772 ай бұрын
My Apollo is about 15 yrs old and still going but I tend to mainly use solid rings and just use your crimps in tight spaces.
@christianlassen70272 ай бұрын
But a Pex crimper that look like bolt cutters. They actually work. I always use solid rings as well. The rings he’s using in the video won’t pass the code in my area.
@jamesbarisitz47942 ай бұрын
Same boat. I'd rather get something new that works. Returning things invoves communications, weighing, postal cost, waiting.. screw it.
@JohnnyG19562 ай бұрын
I have not broke mine yet, but I have had it lock up. This mostly happens when one handle is up against a wall. It does the job (most of the time), but it is a poor design.
@HapaHeritage2 ай бұрын
Thanks, got the trimmer plus and was quickly welcomed to the monopoly world of attachments…
@jsmcguireIII2 ай бұрын
One thing I did was tape plastic sheeting in different portions of the shower and watched if the leak continued. This allowed me to eventually find the bad area and get after it.
@diyorbust8423 ай бұрын
I highly recommend it. Best of both worlds!
@JuniorHuerraa3 ай бұрын
I have both I'll try it
@donnasaunders42203 ай бұрын
same with the craftsman 18" 42 cc. A lot of their parts are the same as this one I have noticed.
@s.linn50863 ай бұрын
At what point do americans just admit that a vented clothes dryer... a machine with a 6,000 watt red hot heating element that blows 100% of that expensive electric heat energy out of a 4" hole in the wall... is maybe a worse idea than *dehumidifying* the moisture out of the clothes with a heat pump dryer? Switzerland admitted it in like 1997 lol.. but then, they're an *actually developed* nation. Seriously, heat pump dryers make sense!
@CubbyTech2 ай бұрын
Heat pump dryers are nice - however take 2-3 times longer to dry less clothes (reduced capacity) and are 2-3 times more expensive.
@NicolajTopp3 ай бұрын
Blowing the hot air directly out of your building is such a waste of energy. Better use a heat pump dryer.
@s.linn50863 ай бұрын
Resistance electric vented dryers are the absolute most boomer american idea I can think of... "Burn it all and blow it out of a smokestack! Make those lazy millennials pull themselves up by the bootstraps like we had to when we inherited all the land!"
@diyorbust8423 ай бұрын
I wouldn't go that far. Let's just start with get a job and move out of your parent's house before you are 40. Or maybe stay with a job for more than a year because they didn't promote you from associate to CEO. 😂
@jamesbaker4293 ай бұрын
Dehumidifier will dry the cloths for less then a quarter of the juice .
@harveypaxton12323 ай бұрын
By showing what was built up in your rigid pipe you disproved every thing you were claiming about the flex hose.
@diyorbust8423 ай бұрын
I had used flex hose previously. It clogged the rigid pipe with lint. I am switching to rigid hose with another lint trap and booster. I will do another video showing the results in the pipe. We'll see!
@harveypaxton12323 ай бұрын
@@diyorbust842 Proper maintenance is the key regardless of the piping you have.
@flyingjeff19843 ай бұрын
If you put a match to that old vent hose, you will have an eye-opening experience. Don't use that cheap crap.
@diyorbust8423 ай бұрын
Yeah, no more flexible hosing. Only semi-rigid for now on.
@andrew40293 ай бұрын
Got a link to the Amazon listing?
@diyorbust8423 ай бұрын
I just added it to the description
@bobguy65423 ай бұрын
You should put that lint trap in front of your $100 in-line booster, that way it doesn't get clogged up.
@diyorbust8423 ай бұрын
Yup. I just swapped them around. Thanks for catching that.
@melvynburchell3 ай бұрын
I have the same model and was about to head out to buy a new one. So thought this was a brilliant idea so gave this a shot and it is now like new! Many thanks you saved me buying another unit!
@stefenhill32695 ай бұрын
This also works with a fizzi but it's a little more difficult lol so much water came out of mine but it's working like a charm again. Thank you!
@fbarousse7 ай бұрын
Hi...I clearly understand this video is related to a SodaStream machine. Nevertheless, I am wondering is this solution could work with the Aarke carbonator 3 machine. Anyone with experience on how to fix exactly this situation with the Aarke carbonator 3?
@HouseCallAutoRepair8 ай бұрын
If the brake pads DON'T move EASILY...DESCALE the caliper bracket! (NOT the caliper)
@tams.1148 ай бұрын
Thanks.
@lindadodge54379 ай бұрын
Thank you sir.
@altabanff10 ай бұрын
Thanks, saves me from buying a new one!!!
@user-go1nn3jy6n Жыл бұрын
Worked perfectly! Thank you.
@dollhouse3009 Жыл бұрын
dude - i know i'm late to this but my machine kicks arse more than it ever ever did thank u so much
@Erik3094 Жыл бұрын
Amazing, thank you
@trippypixie1 Жыл бұрын
Thank you!! I was really struggling to find information on how to fix my Sodastream, but this worked!
@itatygonzalez7624 Жыл бұрын
Any damage from the soap that goes into the coolant?
@megbobeg Жыл бұрын
Thank you so much! I was getting so frustrated with this and the reverse pressure fixed it right up.
@bradfieldb Жыл бұрын
Yes, another one works properly again, thanks for taking the time to post this 👍