Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
5 жыл бұрын
5 жыл бұрын
6 жыл бұрын
Пікірлер
@koblescar 5 ай бұрын
So do you have to leave the loader control arm repositioned inward with this top due to clearance with the door or can it get moved back after install?
@originaltractorcab8840 4 ай бұрын
We would recommend leaving it turned in but you could turn it back if you feel that the door won't be in the way.
@paulciampa 7 ай бұрын
always impressed with the quality and well thought out design of each tractor cab.I purchased my OTC for my 1025R any chance you are going to make a storage bag for the panels and windshield for summer storage?
@originaltractorcab8840 7 ай бұрын
It is something we are looking into.
@bikeman5 8 ай бұрын
execellent video
@leeperry4207 8 ай бұрын
Does this work with a loader attachment and does the rear window open for a blower adjustments Tks
@originaltractorcab8840 8 ай бұрын
We design our cabs with the factory loader installed. The rear panel does not open.
@standavis7266 8 ай бұрын
Do you have one without the wiper? Price?
@originaltractorcab8840 8 ай бұрын
We do not have a version of this kit without the wiper. The price of the kit shown as of right now is $1774.99.
@standavis7266 8 ай бұрын
Can you tell me the installed height of the tractor? I can not fit in my garage with the ROPS bar all the way up. I do see it is higher then the roof in the up position.@@originaltractorcab8840
@jerryhines5659 8 ай бұрын
Can't wait to get it
@nathanielhale486 9 ай бұрын
My cab doesn’t have a place to ground the wiper
@originaltractorcab8840 9 ай бұрын
The wire should be able to reach the tabs where the front posts connect to the top frame. I would connect it there.
@judyandhuggins 9 ай бұрын
What is a good heater for this setup ? thanks
@originaltractorcab8840 9 ай бұрын
We don't really mess with heaters here but we've heard hot water heaters work pretty well.
@bhoffroad3449 Жыл бұрын
This cab is useless! So slightly built mine is a year old and ready for the trash
@Richardz-hx9rk Жыл бұрын
as it stands, for anyone with the bx23s ( they bought it to be able to use the backhoe. not for the looks of it, I have about 600 hrs., on mine and about 300 of them were using the back hoe) this cab is practically useless.
@rlolney Жыл бұрын
Attempting installation today!!!! Wish me luck.... LOL
@rlolney Жыл бұрын
This is a great instructional video. Fairly easy to follow. HOWEVER, how about including the instructions for a COMPLETE installation? This video misses the door handles and windshield wiper installations. I'm sorry, but the written instructions are like reading IKEA assembly instructions. Nowhere near the completeness of this video.
@Rusty_Nickle Жыл бұрын
Just a heads up to anyone buying one of these. If your mechanically inclined at all like me ,it only took me about an hour to put this thing together. It's not completely airtight. But it does the job well.
@KubotaTractorTherapy Жыл бұрын
🚨 ⚠ How sweet is this new cab ! Whomever is getting this is going to be very very happy I'm sure. Keeping dry and warmer in the winter must be nice. Great install ! 🙂
@KubotaTractorTherapy Жыл бұрын
Good monring Original Tractor Cab company ! ⚠ How much height does your cab add to the ROPS ? .... I'm guessing you can't drive into a standard garage with this installed, but wow, what an amazing find.... my friend AkDadStuff told me about you. I'm watching his new install video of your product right-now as I type this. @AkDadStuff ✅
@originaltractorcab8840 Жыл бұрын
Good morning! For this tractor the top of the cab is 84" from the ground.
@tomsmith3047 Жыл бұрын
the audio is terrible.
@originaltractorcab8840 Жыл бұрын
Thanks for the feedback, we are looking into getting a better microphone.
@elektrikman8834 Жыл бұрын
I had two of these for my Gravelys they are great but a pain to build
@Atalanta. Жыл бұрын
$1,300 jesus........
@Duganoz Жыл бұрын
I just installed my 23s OTC. Bought it earlier this year for the snow season. I reviewed this video thinking I did something wrong. The curtain by the fuel cap is too short an a big gap there. I see the same is in this video. Other than that, I think it’s pretty good.
@christianeruel9775 Жыл бұрын
Dimention
@platinumlawnservice Жыл бұрын
yeah but 1300 bucks for a 4000 dollar tractor?
@Xan2k Жыл бұрын
$4,OOO tractor? Don't know where you get you info from.
@shawnhertershfreshstart8480 7 ай бұрын
you run a lawn service and you think that's a 4k tractor, really !!!!
@sammygarret2024 Жыл бұрын
My X354 has carhartt's & a full face motorcycle helmet with a face shield 😆
@btripodina70 Жыл бұрын
I am going to attempt this today. Installation with lights wipers and heater. Can I use 1 power feed from battery to operate all three, led wipers and heater?
@originaltractorcab8840 Жыл бұрын
We recommend using one wire for each component so they are using the correct fuses.
@fabiofreire8214 2 жыл бұрын
Olá amigo onde comprar uma cabine dessa..
@originaltractorcab8840 2 жыл бұрын
originalcab.com
@rossreed6559 2 жыл бұрын
How tall does this make the cab from the ground, not including ROPS.
@originaltractorcab8840 2 жыл бұрын
It's 80" from the ground.
@george.s.8491 2 жыл бұрын
Oh man you really helped me, the directions wording were ok but the pictures were bleary, Iam so glad you did this tutorial! Happy Independence Day or at least what’s left of it.
@D70340 2 жыл бұрын
I was looking into this cab for our BX23s, but it has way to many holes for draft and snow to get in. Can`t use the backhoe with the cab on the tractor either. I guess i`ll pass until you have a better design. Appreciate the video, but maybe you should look into "Biff`s Equipment" channel on you tube. Biff did an excellent install video. kzbin.info/www/bejne/qWeQXnqdhreSo5o
@John-vd6sk 2 жыл бұрын
Dont know why You didnt make a hinged bracket or even removable for the back panel (like side doors) to make access to the backhoe ...Cab is useless if You have to take it half apart to access the backhoe...
@originaltractorcab8840 2 жыл бұрын
We try to make our cabs to where they can fit through standard garage doors, when you spin the seat around for the backhoe it raises it about 8 inches and would make the cab too tall.
@John-vd6sk 2 жыл бұрын
@@originaltractorcab8840 well, here is a tip for your designers hinge the roof at the front to raise up the rear of the roof with holding brackets this way when the roof is in the low position You can still clear a garage door and make the rear window removable like the side doors and raise the roof , so this way when You want to operate the backhoe , You Can ...if you use my idea I want royalities.....lol and how come You did away with the lower crossbar around windshield that You used on the #12078 kit , that crossbar looks much stronger then this set up...
@originaltractorcab8840 2 жыл бұрын
@@John-vd6sk This tractor model has quick release hydraulics that were in the way of mounting the second leg from the 12078 crossbar. We designed it with a single leg and found it to be strong enough.
@lenbeldwin6759 2 жыл бұрын
have you had the necessity to change the belt on your snowblower and if so could you give some tips on how to do that there seems to be some issues with that changeover
@originaltractorcab8840 2 жыл бұрын
We don't use that snowblower very often so we haven't had to change the belt, sorry we couldn't help.
@joegf1739 2 жыл бұрын
I just installed this top. It's a nice top, but the instructions are hard to follow (wish I found this vid earlier), and the fasteners leave a lot to be desired. I added 2 6mm washers to the front and back of every bolt. It made a nice difference. Also be careful on step 1, installing the loader lever shim - it's super easy to bust the head off one of the OEM bolts. Ask me how I know lol.
@originaltractorcab8840 2 жыл бұрын
Hello, I was wondering if you could share your opinion on what we could change in the instructions for future manuals and revisions.
@joegf1739 2 жыл бұрын
@@originaltractorcab8840 Sure, would be happy to. Few things that come to mind: 1) More photos (and clearer, & color) are needed. It's very hard to visualize a lengthy set of text instructions. I had to read then re-read many of the steps multiple times before I even knew what step to take next. Then I often found myself a few steps later going, ah-ha, I did that wrong, and re-doing a previous step because I could now see it. It was often difficult to determine where on the tractor things were mounted - mostly because the photos that are in the manual are small, not super clear, and aren't a good perspective; maybe a better photo reference point on the tractor, larger, clear, color photos with arrows, etc. 2) The fasteners should be easier to identify. Yes, they are clearly spelled out in text descriptions, but again, being able to quickly visualize what fastener goes where would have really helped. 3) Finally, that loader lever shim and the fasteners are no good. First off, the OEM fasteners are junk and snap with just a small amount of torque. Second, the shim is super low quality and a bad fit. Lastly, I ended up using my own fasteners with some thread lock. It's OK now but that shim still bugs me. Hope this all helps.
@originaltractorcab8840 2 жыл бұрын
@@joegf1739 Thank you for your reply. Early 2021 I started updating our manuals replacing black and white photos with color photos and trying to replace blurry photos but some of our old manuals are still out there. We are tagging each part with a label number now but we'll try to figure something out with the fasteners. As for the shim, that is something I'll bring up with our engineering department.
@joegf1739 2 жыл бұрын
@@originaltractorcab8840 The part tags were really great. Sounds good. Let me know if you need a tester for any shim improvements. I may modify modify this one by grinding an angle into it. Or maybe make a new one. I do love the cab and it does a great job keeping the snow off me! Thanks for offering such a great product at a very fair price - really appreciate it.
@timothyoljey4226 2 жыл бұрын
do the rops still fold down and what is height of roof trying to see if I will have clearance with cab into garage
@originaltractorcab8840 2 жыл бұрын
Yes, the rops will still fold down and the overall height is 82".
@alexnnnv1 2 жыл бұрын
@@originaltractorcab8840 how do I get replacement parts for this cab?
@originaltractorcab8840 2 жыл бұрын
@@alexnnnv1 Look into which parts you need replaced and call our company.
@Yukanag 2 жыл бұрын
Where the hell am I supposed to put the heater that you charged me $100 for. Literally zero instructions.
@jimstruve3602 2 жыл бұрын
I just finished installation and the video was very helpful!
@ralphvisocchi1278 2 жыл бұрын
Too expensive , complicated to install, manuals and video not clear on how everything goes together🤢😆
@grega-kendalheightsdecorwo9511 2 жыл бұрын
What is the BX23s Cab worth? Not on your website yet.
@jj1479 2 жыл бұрын
$1,235. It’s on the page now.
@brentmcg4709 2 жыл бұрын
Will this cab fit with the 120R front loader attached to the 1025R?
@originaltractorcab8840 2 жыл бұрын
Yes it will
@joeravis34 2 жыл бұрын
hey you got part # for the shute actuator?
@retry1812 3 жыл бұрын
Were can i buy that canopy
@bandman1967 3 жыл бұрын
Originally very happy with this purchase. However I sadly bent the hollow pipe frame and ordered parts twice. First time $18 for parts and $32 in shipping with fedex and the 2nd time needing additional parts for $42 with $28 in shipping. That total of $120 was almost as much as the $195 it cost for that top, which by the way is useless one direction when sun blasts you in the face coming back in a pattern. Very, very disappointed. I should have paid someone to make those parts for me. This is just outrageous!
@byronmorrow9103 3 жыл бұрын
I have a cs2220 with loader,backhoe,and deck mower being deliver to me this Saturday. Where would you need it and for how long?
@originaltractorcab8840 3 жыл бұрын
Hello we are located in Arlington In and we would need it 2-3 weeks. where are you located?
@byronmorrow9103 3 жыл бұрын
@@originaltractorcab8840 unfortunately far away. Central Nebraska. I would love to have one of your cabs too.
@nagazinafireworks7594 3 жыл бұрын
Will this fit a BX1880?
@williampeters2046 3 жыл бұрын
I had this on my BX1880... perfect fit.
@raceneely8185 3 жыл бұрын
Do you happen to know the height of this cab on a 2032R?
@originaltractorcab8840 3 жыл бұрын
ON a 40371 cab the newer 2032R it it 86 ground to top on the older unit cab number 11746 it is 81 ground to top-OTC
@wolf0994 3 жыл бұрын
Hello, heard about your product on another youtuber video, kzbin.info/www/bejne/a3iogqd_h79rfpo I live in same region as him and would love to see him demo your product too see if it stands up to the elements so I can consider purchasing one
@gregoriuskenton7561 3 жыл бұрын
By the time I was 15 years old In years 1995, my father buy jonder, from a pastor from the Netherlands, we say here, all trcator say jonder, his brand ford, very good strong, once I accidentally put a 5inc nail into the gearbox, because often stuck his teeth must be open, and the nail broke in the same bite gearbox, my time was wonderful in thet time, now me, cannot buy new, because when my father passed away in 2014 ,we sell thet jonder, hope someday will buy, because in Indonesia fery expensive, hy from west borneo gbu
@davidstake6857 3 жыл бұрын
I watched this to go asleep 😴
@RJ4O4 3 жыл бұрын
I bought one from you for my John Deere 1023e which i use to maintain 2 condominium complexes. Lots of snow here in New England. All i can say is literally this is one of the best things i've ever bought. My job can involve upwards of 20 to 25 hours a month plowing in the winter and the first year i did it with no cab. It was horrible, to the point of thinking about quitting. The problem with the traditional cabs were height and cost. I have to store the tractor in a condo residence garage and they just arent high enough. I saw your company on a tractor time with tim video and figured I'd give it a shot, not even sure if this would fit. It most certainly does...with a whole 1/4 inch to spare ! :) Such a difference. Actually i dont even use the doors. I like the outdoors feel of them being off and the big issue was just keeping the snow off me with the roof and windshield. The little heater you provided also adds just enough to it to keep the inside windshield from fogging up. It is VERY comfortable. Even doing yardwork in the spring/summer and fall cleanup its great. Keeps it cooler inside without the sun beating down on me. What can i say except.....THANK YOU. And if anyone is even remotely considering this all i can say is..JUST BUY IT ! :)
@t.c.bowling1934 3 жыл бұрын
You make nice cabs. I should have got one for my 790.
@troyjean3749 3 жыл бұрын
Is this cab tough enough to stay outside all winter long in the elements
@careyfrennier347 3 жыл бұрын
Anyone know the measurements on where I need to place the wiper motor template for the cab? It looks like 18" in the video. It's not stated in any of the directions. These directions are subpar.
@jasonlohmann9884 3 жыл бұрын
Is there a kit for 2019 massey ferguson 1735m?
@originaltractorcab8840 3 жыл бұрын
Hello there is not
@HotDog88GT 3 жыл бұрын
Height of this cab on a 1025R?