yay thank you! this was very helpful and you said more info that other videos on the same topic
@EmmMcAndrew10 ай бұрын
Glad you found it useful!
@EternalNyappy Жыл бұрын
I feel like all stuff I've see is melted both sides. I guess baking paper to protect the board after flipping and otherwise the same process., I think it will hold together better. But I guess it is a matter of taste if you like the melted side, then it is double sided ofc.
@urvishah7815 Жыл бұрын
I have noticed that once done, in long run Hama beads keep falling apart and the design breaks. Is there anything else that can be done like a coating to keep the beads intact.
@EmmMcAndrew Жыл бұрын
Hiya, I don’t do anything extra to them and they last a few years with gentle care.
@flavias1435 Жыл бұрын
Thank you!
@billstewr1 Жыл бұрын
Temperature of iron?
@TheZenCOOL Жыл бұрын
Sarah tu la mis au combien
@Sophie-k2j Жыл бұрын
I done this and I melted the board LOL
@mikgol812 жыл бұрын
did the storm trooper coaster melt when your friend put a hot coffee on it?
@eaakerman88292 жыл бұрын
Thanks for the tips just starded with Hama beads I making a David Bowie for my friend .
@EmmMcAndrew2 жыл бұрын
Sounds cool, hope it all goes well!
@lisalong36452 жыл бұрын
Thank you so much you have helped me really well
@EmmMcAndrew2 жыл бұрын
Glad it helped!
@JameShark_2 жыл бұрын
Thank you so much for this. I could swear I did everything right before and it didn’t stick. My first project finished with a success after 4 tries.
@EmmMcAndrew2 жыл бұрын
Happy to help 😊
@m18win2 жыл бұрын
Your design it's 2,5 mm or 5mm?
@ditharawickramasekara40972 жыл бұрын
Thank you for showing me how to iron the beads correctly.😊😊
@EmmMcAndrew2 жыл бұрын
No probs, glad you got something out of it 👍🏽
@maisywhiffin50973 жыл бұрын
Thank you this has been really helpful
@EmmMcAndrew3 жыл бұрын
You’re very welcome 😊
@TheCruiser483 жыл бұрын
Found this helpful, but the baking paper i ordered is brown, not so easy to see through, and i think iron was too hot, still came out ok, pleased with my first attempt.
@EmmMcAndrew3 жыл бұрын
I’ve used the brown paper before and got a decent result too. Glad you found it helpful!
@lemonfrog7273 жыл бұрын
Thankyou!!
@morrighan4473 жыл бұрын
I'm glad to read I'm not the only one who got totally obsessed with beads lol. Thank you for the video ^^
@EmmMcAndrew2 жыл бұрын
🥰
@jimddoyle3 жыл бұрын
after I iron it it is half wobbly and half a little bit hard and it would fall apart and break.
@hollyandersonsmusic32262 жыл бұрын
You can iron the back for stability depending on the design you made.
@jimddoyle2 жыл бұрын
@@hollyandersonsmusic3226 thanks i will try it
@jimddoyle3 жыл бұрын
why is mine wobbly
@EmmMcAndrew3 жыл бұрын
Hiya, the reverse side may look wobbly, is that what you mean? Or do you mean beads in the middle or edges are bobby?
@skyrade40423 жыл бұрын
Somehow I always manage to melt the base with while ironing.. any tips for that matter?
@EmmMcAndrew3 жыл бұрын
You might be pressing down to hard, or holding the iron in one spot for too long 👍🏽
@con1_uk4 жыл бұрын
I just keep melting the board =/
@EmmMcAndrew4 жыл бұрын
Hiya, try to keep the iron moving around: if you stay too long in one place, it can melt it. You could also try turning the heat down a little? 😊
@con1_uk4 жыл бұрын
@@EmmMcAndrew ok thank you I've been on the works of a 3d version of the enemy in Mario that is in the pipe that plant just waiting on some glue to put it toghether
@user-pb6lh9uv5e4 жыл бұрын
kzbin.info/www/bejne/jZSyfphnbr2SjpY
@pineappleplaysroblox90004 жыл бұрын
Thanks this really help me alot
@EmmMcAndrew4 жыл бұрын
JustPineapple I’m glad you found it useful! 😊
@pineappleplaysroblox90004 жыл бұрын
Emm McAndrew 🤗
@flowerxrblxsyt49194 жыл бұрын
It say I gOt 10,000 BUt I GOt 10,001 LOl
@CK-ed5ws4 жыл бұрын
Can I use it like a coaster?
@EmmMcAndrew4 жыл бұрын
C KT yes! I have lots of coasters made from Hama Beads 😊👍🏼
@Ryujenini4 жыл бұрын
I'm surprised they don't have wooden boards so the boards can't melt
@jmakesyoutube38353 жыл бұрын
Or metal
@ConstanceMarkiewicz4 жыл бұрын
Is it bad that I bought these for my kid and I'm a bit obsessed with them?
@EmmMcAndrew4 жыл бұрын
ConstanceMarkiewicz not at all - I have them sorted by colour into specially bought boxes...🤦🏼♀️
@mysteriousgamer51934 жыл бұрын
This is Art, and Art is for ANY age!! 😊
@andrewdeacon47375 жыл бұрын
Perfect, thanks!
@EmmMcAndrew5 жыл бұрын
Andrew Deacon glad it helped! 😊
@tiarahaynes-kelly71545 жыл бұрын
What temperature do you use?
@EmmMcAndrew5 жыл бұрын
Tiara Haynes-Kelly hiya, I use 2 or 3 depending on the iron. If it’s your first go at it, I’d say go low and you’ll know if the beads aren’t fusing so you can increase the temp until they start to fuse (you’ll see them start to blob out).
@OukelHeim Жыл бұрын
@@EmmMcAndrew in celcius, what temperature is that ?
@EmmMcAndrew Жыл бұрын
@ariel, I have no idea, sorry! They’re just dots on my iron
@tonyeden83815 жыл бұрын
Perfect 👌
@EmmMcAndrew5 жыл бұрын
Tony Eden thanks for the feedback 😊
@tonyeden83815 жыл бұрын
Emm McAndrew ......I followed the instructions to the letter but they still stuck to the board......... but no problem just peeled it off......all good 👏🏻👏🏻👏🏻
@tonyeden83815 жыл бұрын
Ps.....we got the same iron 😊
@hannahsanihin87385 жыл бұрын
Thanks for the help! I've been obsessed with making these bead arts! (That's what I call it anyway)
@EmmMcAndrew5 жыл бұрын
Hannah Sanihin addictive, isn’t it!
@inactive15506 жыл бұрын
thanks
@alisonkeatings83436 жыл бұрын
Is there a right and wrong side to this as i prefer the side that doesnt show the holes?
@EmmMcAndrew6 жыл бұрын
Alison Keatings if you iron one side, it will show the holes on the reverse. But you can iron both sides of you want, then there’d be no holes showing at all 😊
@alisonkeatings83436 жыл бұрын
Ah great ive only just started this im hooked already 😊
@EmmMcAndrew6 жыл бұрын
Alison Keatings it won’t be long before you’ll be sorting them into little boxes by colour...it’s a slippery slope! 😊
@maryhobbs95077 жыл бұрын
Thank goodness I watched this first 💖
@morsahermosa14027 жыл бұрын
where i can find the grease proof paper??
@EmmMcAndrew7 жыл бұрын
jorge morsahermosa hiya, it's just baking paper. You can find in the baking aisle at the supermarket. Where are you from? In the uk you can also get it in pound shops :)
@morsahermosa14027 жыл бұрын
i already got it, but thanks :D
@arrell7 жыл бұрын
I've always heard ironing over the pegboard will warp the pegboard itself.
@EmmMcAndrew7 жыл бұрын
ruinawish hi, you iron over the paper, not directly on the peg board. The peg board will only warp if you use too much pressure and heat - keep moving the iron around :)
@danina19967 жыл бұрын
Grease proof paper yeah?
@EmmMcAndrew7 жыл бұрын
Yes Danina :)
@robindunne19677 жыл бұрын
I have a steam iron so what do I do?
@EmmMcAndrew7 жыл бұрын
Turn the steam down :) No setting for this? Use the steam!
@robindunne19677 жыл бұрын
Emm McAndrew thanks 😀
@patrickmooney85117 жыл бұрын
As a Dad, I resemble that comment!
@EmmMcAndrew7 жыл бұрын
Glad I don't offend everyone with my one-liners Patrick Mooney :)
@luciahasbun15178 жыл бұрын
Hi Emm, loved your video. Very well explained. Your pattern was really cute btw :)
@EmmMcAndrew7 жыл бұрын
Thanks!
@EmmMcAndrew10 жыл бұрын
Hiya, thanks for your comment! I use an old iron, nothing special, but I do turn the steam off. Regarding multiple board projects, yes, this can be tricky! I always iron each board so the beads have fused enough for it to keep together, then remove from the boards and start fuse the whole project together on the ironing board itself. Hope that makes sense!
@elinormarie10 жыл бұрын
What type of iron do you use? Have you done any multi board projects? Any tips on ironing those?
@EmmMcAndrew7 жыл бұрын
Hiya,any iron will do, but I always turn the steam off.
@elinormarie10 жыл бұрын
What type of iron do you use? Have you done any multi board projects? Any tips on ironing those?