PWC Stability collars , for people that need more stability on their JetSki for doing this type of fishing
@bobsault1912 Жыл бұрын
How much
@AlexanderTheGrateful Жыл бұрын
Hey mate. Just curious why you’re trying to stop the spray. I find that the best part of jet skiing!!
@leelunk8235 Жыл бұрын
I LOVE THE SET UP
@MrWilliamyang Жыл бұрын
Do you drill new holes for pop rivets?
@Jetskifishing-aus Жыл бұрын
No, we use the original poprivet holes, no need to drill new holes..
@mvmedved8 ай бұрын
@@Jetskifishing-ausso how much is this set cost?
@jerseyjetski Жыл бұрын
Thinking about ordering, how does it handle hitting wake or jumping... kinda concerned any jumps or pounding on waves would destroy it...
@jomjohny Жыл бұрын
did you have to make holes on the bracket to fit the pop rivets?
@andreabta2 жыл бұрын
There is something called stopDrill . Is a plastic cover for your drill bit that allow you to select the depth of the hole and stop Your drill to go further... Worse case you can use some fuel hose cut to length if you are really not into that 😂 Don't slam your ruler to the ski or your drill. Bit to the ruler
@Jetskifishing-aus2 жыл бұрын
Thanks old mate, your advice will come in handy. We use a collar on the drill bit as a stop currently, but it tends to move after a while. Will give the hose idea a go on the next installation. Thanks
@Donbrah2 жыл бұрын
What size collar is that? Is that the newest version
@Jetskifishing-aus2 жыл бұрын
They are medium Collars and yes that's our newest design.
@vicsingh63972 жыл бұрын
Two gays are good
@billjenkins15352 жыл бұрын
So it looks like on the ones I just go in that the ss rails have to bend a little bit to conform to the slight bend/curve of the hull fiberglass which does not run in a straight line front to back, right? Actually, it looks like the ss rails are have their curve opposite than the way the boat hull is curved??? Is that right?? Or are we just looking at warping from when the welded studs were welded on.
@Jetskifishing-aus2 жыл бұрын
Hey Bill, the gunnel forms the bracket as you bolt it up. It's a very slight curve and the hols in the Collars are slotted to accommodate the curve. You just have to check the you install the bracket level as illustrated in the video, use a square to get the hole sizes same hight.
@billjenkins15352 жыл бұрын
@@Jetskifishing-aus That is interesting because if I run the sight along the bracket itself, it is not straight, but has a curve in it - almost looking like was factor bent/shaped to match the curve of the hull. In order to install, though, I will be having to flexing against this curve. Do the rails come curved a bit, or are they straight to begin with. Again, mine curve opposite the curve of the hull. Looks like to can counter-flex them to match while doing fit-up but, I was just wanting to make sure I wasnt doing something wrong.
@Jetskifishing-aus2 жыл бұрын
The brackets aren't straight, they have a curve in them from the welds and bender. You can straighten them by hand on a flat service to make the installation a bit easier. They were designed to bend and form with gunnels, as most gunnels have a slight bend in them.
@billjenkins15352 жыл бұрын
@@Jetskifishing-aus Got it - Thanks for the clarification - Looking forward to installing and using them.
@kkutube19722 жыл бұрын
Would love to see how strong or what it would take to damage them. Would I no longer need a fender when docking?
@kkutube19722 жыл бұрын
Great fit.
@JohnBraman4132 жыл бұрын
do they ship those collars to the usa?
@Jetskifishing-aus2 жыл бұрын
Hey John, Yes we do. We ship world wide. www.pwccollars.com
@travisellis9322 жыл бұрын
May I ask where did you purchase your collars from and how much did it cost? I have an Kawasaki Ultra LX
@Jetskifishing-aus2 жыл бұрын
Hey Travis, check out our website for more information and our online store. If you send me a message trough the website I'll quote you up a set delivered to your door. Just ask for Rico www.jetskicollars.com
@tomkim46852 жыл бұрын
Who ever film this very dizzy to watch
@chazbickel45182 жыл бұрын
Is the main purpose for stability? Thanks
@redpineapple99082 жыл бұрын
2021 GTX would not need these - its very stable out of the box
@travisellis9322 жыл бұрын
Do you know if they ship to Hawaii?
@Jetskifishing-aus2 жыл бұрын
Hey Travis, we sell our Collars world wide. Visit our website for more information. www.pwccollars.com
@Mr-ts8il2 жыл бұрын
Hey mate what bait did u used at how many feet of water?
@Jetskifishing-aus2 жыл бұрын
kzbin.info/www/bejne/e5ubp4Rno7yGrZY
@samj117912 жыл бұрын
Looks awesome! Does the strap stop the reverse bucket from coming down?
@Jetskifishing-aus2 жыл бұрын
Hey mate, no not at all. You can strap it with the hooks at the bottom on the tie down points and the strap at the top behind the bin.
@samj117912 жыл бұрын
@@Jetskifishing-aus Awesome thanks guys I’ve just received mine!
@charlesarmstrong82062 жыл бұрын
Lekker boys, new to the JetSki fishing family, just bought the Seadoo fish pro sport with extra long range fuel tanks and going to have a go at Marlin and Blue fin Tuna here on the NSW south coast at Bermagui. Lekker to hear the taal and accent, enjoy boys. Any tips for a beginner👍
@Jetskifishing-aus2 жыл бұрын
Hey Charles, best of luck out wide mate. Hope you get heaps. We have been a bit slack, hopefully this stupid wind will settle down so we can still get a few trips in. Best advice I can give is to get out and give it a go. Send us some pictures once you land those big boys.
@mrfixit57192 жыл бұрын
Gollie jeez...what a wonderful idea...mines better though...😆 I designed it 10 years ago...I can dive off my ski 😆 kzbin.info/www/bejne/amm2n6KYacR1gZY Wing inflatable makes a good one too 😉 made from tpo
@houseofconversions2 жыл бұрын
Awesome ski wat jy daar het. Lekker man Lekker
@kylekretsinger42482 жыл бұрын
Well done.
@billjenkins15352 жыл бұрын
How does the floatation member attach to that stainless horizontal added to the ski..
@Jetskifishing-aus2 жыл бұрын
Hey Bill, the mounting bracket comes with 10 stainless steel bolts welded to it and the Collar attaches to them with M6 stainless nuts and washers.
@billjenkins15352 жыл бұрын
I saw that part but what I'm wondering is is there some kind of a groove or a slot in the flotation device? I could not see any groove or slot in the side of the flotation device because that was next to the ski body itself. How is that actually done. I am wondering how I mount those downward-facing studs and screw them onto the flotation?
@Jetskifishing-aus2 жыл бұрын
@@billjenkins1535 yes, the Collars have a mounting plate with slotted holes inside of them that are used to bolt on to the mounting bracket.
@johannesvanhoek90802 жыл бұрын
Very nice video , I live in Florida and have your collars on my waverunner and it makes fishing in the Gulf of Mexico much safer with the rolling waves that we have here when pop up thunderstorms move in ! PS. Thank you for your product !
@Jetskifishing-aus2 жыл бұрын
Thanks heaps for your awsome feedback Johannes, one of my bucket list items, fish the Gulf of Mexico. There's a marlin out there with my name on it!
@johannesvanhoek90802 жыл бұрын
@@Jetskifishing-aus hope you make it one day , fishing here is nice and productive as well 😊👍. PS. Safe fishing to you all 👍
@mmingin872 жыл бұрын
Do you ride the skis over from Hervey Bay or trailer the skis onto Fraser?
@jomjohny2 жыл бұрын
Just foam, i think one can make these without paying over 1k??
@Jetskifishing-aus2 жыл бұрын
It's not just foam, it's CNC cut buoyancy foam with stainless steel reinforced support brackets inside and covered with a thick polyurea rubber coating finished of with EVA marine decking foam. All of this is done in house in Australia.
@alvindavis4158 Жыл бұрын
Easier said than done.
@jomjohny Жыл бұрын
@@alvindavis4158i bought one and using it now. i love it
@alvindavis4158 Жыл бұрын
@@jomjohny Worth it, I would guess.
@jomjohny Жыл бұрын
@@alvindavis4158 i bought it, yes Worth it
@Hlortizbaez2 жыл бұрын
where is this store?
@Jetskifishing-aus2 жыл бұрын
www.jetskicollars.com
@kabaimario25122 жыл бұрын
I am from philippines i have 2019 ex sports waverunnet how much idoes it cost for shipment to cebu ,philippines
@davidv35172 жыл бұрын
Can they be installed on Sea Doo SPARK
@jacodippenaar15233 жыл бұрын
Lekker tjomma. Is jul naby die gold coast? Wil jul join
@jacodippenaar15233 жыл бұрын
Lekker man
@yidarravideos26083 жыл бұрын
Hi Can you use your collars to add bouyancy and extend the length of a jetski to beyond 3.75m so you can go beyond 5 Nautical miles from the coast?
@tiedupand2twisted3 жыл бұрын
Would have been better if you dump the music and take your way thru it..
@chrisclark75623 жыл бұрын
Great video buddy, what size collars did you order?
@ashleyarmitt3 жыл бұрын
i don't think people understand the remoteness of this on a Ski lol
@barryiwashita63523 жыл бұрын
Yup …all the amenities and more…it’s not a boat , loaded down especially in the rear ever tried getting back on from the back ?… or even from the side ?… ski will tend to stand nose up and roll over…I’ve loaded my fish bag 1/2 way on my 3 person ski fishing by myself with only 2 poles even with a high capacity ski and large deck putting weight on rear corner it wanted to roll …it was so off balance it porpoised all the way bac in to shore…when I got to shore I entered the water and climbed back on the rear and literally stood the ski up in the air it then wanted to roll to side…took some fish out ( tuna ) until i was able to climb back on from rear safely…and with margin because i did it in calm water…tried from side loaded the ski wasn’t having it…my other Freind had a large tuna on his sled in a bag 19 miles out in the pacific .. he got rolled …with multiple tries he wasn’t able to roll it… detached fish bag sled and was able to get it back upright…although he has put extra straps to secure seat and hatches he got a lot of water in engine compartment…luckily it started ….a warning to you j/skiers ..it’s a great platform to fish from but remember when you start putting a lot on rear deck especially coolers with nominal weight make sure you’re able to get back on from rear or side, know the limitations before you head out…rule of thumb is the more amenities you got the more top heavy it becomes and the less chance you’re goin to roll it back over if it’s bolted down…being safe is having fun 👍🏼
@Jetskifishing-aus3 жыл бұрын
Great advice Barry! It was for that specific reason we design Jet Ski/ PWC Collars. Collars adds certified positive buoyancy to Jet Ski's that allows you to carry extra weight on the back with out the risk of overloading your ski. They are low profile, can't deflate and will keep your ski afloat. Check them out www.jetskifishingmob.com.au/
@s0nnyburnett3 жыл бұрын
Epirb is going down with that ship and won't help you.
@Jetskifishing-aus3 жыл бұрын
Your are right, best to get yourself a PLB and keep it on you.
@johngaljaardt3 жыл бұрын
I thought it was video
@SuperMassman3 жыл бұрын
QUESTION: do you make WIDER models
@Jetskifishing-aus3 жыл бұрын
Yes, we can customise them to any size or shape. Just send us the details trough on our website www.jetskicollars.com and we'll get you sorted.
@reginaldopaivapaiva40393 жыл бұрын
Santarem Pará Brasil 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👍🇧🇷👍
@PAIZALFISHING3 жыл бұрын
Amazing...😁
@Jetskifishing-aus3 жыл бұрын
We are based in Narangba Queensland Australia and have fitment and distribution agents in Australia, New Zealand and the USA. pwccollars.com
@johngaljaardt3 жыл бұрын
Can you please put a link to the salesperson in AU?