Жыл бұрын
Пікірлер
@subearu 28 күн бұрын
Looking forward to part 2! Keep up the good work bud.
@89autoworks 28 күн бұрын
There will be much more to come with the landcruiser. We moved and just have been trying to get settled here. Thanks!
@rupperzs 3 ай бұрын
Your content sucks
@GeauxRilla 4 ай бұрын
What wheels are those?
@ricardolee461 4 ай бұрын
I need it for my sti
@jjoop 5 ай бұрын
This is exactly what im doing on my wrx when i put the stock pistons and rings in
@remogaggi82 5 ай бұрын
You pissed someone off. You are at 999
@89autoworks 5 ай бұрын
We are better off with out them anyway.
@5265060 5 ай бұрын
Even with the camera on, I'm not sure I could stay that calm ripping head bolts lol. Love seeing what feels like a shit show one day and turn to a flex soon after. Now you know and peace of mind is priceless. Good show.
@89autoworks 5 ай бұрын
Unfortunately, when working on vehicles, you learn to expect the unexpected, especially on these older Japanese vehicles. There will be some fun stuff to come in the next month as soon as we get this landcruiser dialed, thank you for watching!
@06RHDSUBIEWAGON 5 ай бұрын
not gonna lie I've been debating running a rotated setup on my rhd sti wagon just cause it would make it that much more unique of a setup but being rhd im not 100 sure.
@89autoworks 5 ай бұрын
It sure does add a whole other level of unique, but with that comes a whole new set of problems to overcome. If you’d decide to do it, you know where to go if you need help! 👍🏼
@06RHDSUBIEWAGON 5 ай бұрын
@89autoworks I wanna do it just would like to keep my new turbo and tomei manifold just wanna swap the up pipe
@89autoworks 5 ай бұрын
If your turbo is stock Subaru location, I wouldn’t recommend it, half the reason of going rotated is to be able to run larger turbos, and to make a downpipe to stock Subaru bell mouth would be miserable.
@06RHDSUBIEWAGON 5 ай бұрын
@@89autoworks so what would be a step up from a stock subie turbo
@89autoworks 5 ай бұрын
@06RHDSUBIEWAGON there’s so much more to it man! You don’t go rotated on a stock car, the whole point of being rotated is to fit a turbo that will not fit in stock location. That being said, bigger turbo, means bigger everything else, fuel system, FMIC, etc etc etc.
@jamesgrant1713 5 ай бұрын
Please tell me that isn't how y'all secure vehicles on trailers!
@89autoworks 5 ай бұрын
4 corner straps plus the winch? You realize that the straps going through the wheels are just the tail that gets ran inside the car to avoid the straps from flying out in the wind?
@JoseLengua-f2v 6 ай бұрын
i just got a 05gt limited just like this one, can i do the sti intake manifold / intercooler on my stock motor?
@89autoworks 6 ай бұрын
With a fair amount of playing around, it can absolutely be done!
@5265060 6 ай бұрын
Sweet ride man! I always love to see more 80 series content, especially when it envolves the kids wanting to get their hand dirty wrenching with Dad. I just got all the parts for the front seal, oil pump gasket, , egr delete, valve cover/ valve/ plug seals, and all new cooling everything with rear heater bypass in my US spec '97. Plan is to address all current/ possible leaks and keep her cool. Then its on to AC, all bushings and steering rebuild. Wish me luck, I'll be following along with you guys for sure.
@5265060 6 ай бұрын
I just saw the ending :( To sympathize, I just bought $2k in parts alone for just oil leaks and a robust cooling system rebuild. My 1fz-fe seems healthy (fingers crossed/knock on wood), just a little dirty and tired. While I will give one good attempt at rehabilitating this engine, the real dream is a Cummins swap. Truthfully I love my 80, but my little green eyed monster is seething at the fact you blew yours on the first real drive and now you have all the options in the world to consider, But I try to be a "the glass half is full" kind of guy for my own mental health haha
@89autoworks 6 ай бұрын
@5265060 she will be back together and better then ever! I can promise you the next video is just as sad as this one! This was a couple weeks ago, to say that there’s more drama to come would be an understatement 😭. Thank you for watching! There will be plenty more to come for this ole girl, and may just be a couple more in the very near future 😎
@5265060 6 ай бұрын
@@89autoworks We're here for it, bud. I'll probably be working on mine watching you work on yours haha.
@89autoworks 6 ай бұрын
80 series partyyyy
@CaldoBuilt 6 ай бұрын
Hell yeah!!! Congrats brother thats a beast of an SUV once you address all the problems.
@89autoworks 6 ай бұрын
Thanks bro! Hopefully I’ll get it running soon. Promise the next video will be just as dramatic as this one 😂😂
@damnitdang 6 ай бұрын
How had it been? Alot of teviews that theyre not accurate on sone scale and other issues its not calibrated or something
@89autoworks 6 ай бұрын
If you’re talking about the scales, 10/10 absolutely love them. Never been an issue at all!
@lofihiphoptrio 6 ай бұрын
Yo really enjoyed the video nice shop that 04 sti is the goat.
@johnb382s 7 ай бұрын
Runs OTS map with mods not made for that calibration, blames accessport OTS maps.. makes sense sounds like a typical clown 🤡 of an owner..
@zippack999 7 ай бұрын
Can you add the part number for the replacement pcv I order the wrong one
@89autoworks 7 ай бұрын
PN:11810AA040 🤘🏻
@zippack999 7 ай бұрын
@@89autoworks not all hero’s wear capes
@zippack999 7 ай бұрын
@@89autoworks by bad bro but This is the same one I ordered with this one the threading starts late compared to the one you have which starts at the beginning. because of that, it wont thread in when i try to install
@89autoworks 7 ай бұрын
@zippack999 that’s my bad bro! This is the one you need, sorry about that! www.importimageracing.com/products/subaru-oem-intake-manifold-fitting-subaru-wrx-2004-2005-sti-2004-2021-14076aa030?currency=USD&variant=39754133405792&Google%20Shopping&stkn=d776b209dbda&gad_source=1&gclid=CjwKCAjw0YGyBhByEiwAQmBEWowltITJTnZ-xKVO5KCwaafDehfgL-DzAyikTXTJRu_CmSuoW-waehoCweUQAvD_BwE
@zippack999 7 ай бұрын
@@89autoworks 🫡🖤
@alexizmonteiro2063 7 ай бұрын
You just said Cobb downpipe and there is your problem they don’t have a tune for the downpipe for the va chassis on the Cobb downpipe. Maperformance is I believe one of the only ones to figure it out I blame the owner on this one I had the stage 1 plus tune and it was only for the intake it ran great too.
@jorgesepulveda1477 7 ай бұрын
Thank you very much for your video I loved it a lot and you made my day
@JermJermFlores 8 ай бұрын
So is there no part 2
@zippack999 10 ай бұрын
I have a 03 wrx So I just need to replace the pcv valve with 04+ and it work just fine no tunes?
@89autoworks 10 ай бұрын
As long as you’ve got everything installed properly, you will not need a tune. Me personally, I always wait to install things until we are going to the dyno already, but the AOS should require no alternative tuning. If you want to clarify that, just give IAG a ring and they will tell you certainly one way or another.
@zippack999 10 ай бұрын
@@89autoworks ok cool but replacing the pcv valve to 04+ on the 2002-2003 makes the whole thing work right cause that’s the only step in the instructions where I know that hose won’t fit.
@89autoworks 10 ай бұрын
@Jeff-cn9bu correct! You’ve got the idea!
@zippack999 10 ай бұрын
@@89autoworks thank you man why is no one talking about this problem ur video is the only one
@89autoworks 10 ай бұрын
@@zippack999 because I LOVE Bugeye’s. Up until a few years ago, that was an unpopular opinion. That AND I have a great relationship with IAG and they are always looking out for me.
@Beelzebotable 10 ай бұрын
You mentioned cutting of the subframe to make the rack fit but there's no footage. Does the 2015 rack fit into position similar to the original rack or does using the AN fittings negate the need to cut into the subframe?
@89autoworks 10 ай бұрын
I did not end up having to notch the frame, with the a line, things just worked out great. From what I hear, the 2015 rack is a ton of screwing around to make fully functional! Let me know if you need help sourcing any parts [email protected]
@Beelzebotable 10 ай бұрын
That's good news! I'm doing the same retrofit into my 04 STi and currently finding the best place for a steering rack. Canadian prices are insane!@@89autoworks
@xjustjoshiox 11 ай бұрын
That 90° that comes off the side of the power steering pump won't connect for me. It's pushing against the coolant crossover😢
@89autoworks 11 ай бұрын
What’s the vehicle? Possible that you have a JDM motor? The coolant crossover comes off at a different angle I believe.
@xjustjoshiox 11 ай бұрын
Your right, the crossover is JDM! The original coolant crossover rusted out of the freeze plug on the back. I just replaced it 2 months ago and I've been waiting for this kit to come in. I didn't realize I bought a JDM version of that pipe so I can either toss this coolant pipe that I just got and order the USDM version or I can return this kit. I can tell you right now I'm not about to tear the manifold down and throw away a perfectly good crossover just to replace it with another one so I can fit a 90° elbow somewhere lol. Hopefully the return policy is good at Chase Bays hehe.
@johng1437 5 ай бұрын
@@xjustjoshioxwhat’d you have to do? I have a ej207 swapped bugeye that i just ordered the chasebays kit for
@xjustjoshiox 4 ай бұрын
@@johng1437 I ordered a usdm crossover, mine was JDM. I ended up buying the 2008 STI pump and the fitting from chase bays for the 04 STI and it worked perfectly.
@01KINGKENG Жыл бұрын
I’m glad i found this. I just about an 02 wrx wagon and I’m about to do the same build
@rupperzs Жыл бұрын
402 holy shit!!!!!
@rupperzs Жыл бұрын
310 WHP
@rupperzs Жыл бұрын
Love the content man keep it coming
@TheeHenley Жыл бұрын
looks sweet cant wait to do something like this to my 05 sti
@RumbleGarage Жыл бұрын
🔥
@89autoworks Жыл бұрын
Thanks for watching Bill.
@tranwrx Жыл бұрын
It's the driver, not cobb😂😂
@89autoworks Жыл бұрын
If a tune is proper, the car should be able to handle just about any driver. Just saying.
@tranwrx Жыл бұрын
@@89autoworks pretty sure the owner abused his vehicle..
@89autoworks Жыл бұрын
Honestly, this owner treated his car pretty dang well with meticulous maintenance!
@subearu Жыл бұрын
Looking forward to it!
@RumbleGarage Жыл бұрын
Hell yeah! 🤘🔥
@kimofromkalihi Жыл бұрын
Should’ve run a recirculating BPV instead of a BOV. Can’t ots without speed density and a tune. Owner F’d up.
@DreamInVader360 Жыл бұрын
Great video by the way
@DreamInVader360 Жыл бұрын
I tried finding that flex hone but couldnt find it. Have a link?
@89autoworks Жыл бұрын
www.ebay.com/itm/374069393954?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=h3wNP9rhSpK&sssrc=4429486&ssuid=hp8jscexqiy&var=&widget_ver=artemis&media=COPY
@kerryhoward804 Жыл бұрын
If that’s your dream car then you need to be drug tested!! I get it you have all that engine crap for a 4cyl but I just don’t understand why you kids like that crap. Fast & Furious ruined kids!!
@89autoworks Жыл бұрын
Well the main reason I love “That crap” is because there’s nothing that brings me a bigger smile, than putting a bus length on some v8 American ignorance, with half the displacement. Everyone loves to talk all sorts of negativity on the internet, but usually that’s because they can not afford it, and certainly don’t have the skill set to build it. Thanks for watching, make sure you subscribe to watch more of this fast and furious crap.
@kerryhoward804 Жыл бұрын
@@89autoworks I have plenty of skills young man and I can definitely afford it I promise you that. The worst thing we did to vehicles when I was young was put radios and speakers in them or lower or lift them. I just can't stand hearing the sound of these mufflers kids use or black rims although some are OK not many. But I get it now when I remember how old people didn't like or understand the things we did or liked because now I can't stand anything that younger generations like or do!!! As far as American ignorance goes my grandfather and great uncle worked at Ford in Detroit in the 60's and 70's and I did two tours in Iraq in the Army
@AngryRanga Жыл бұрын
Where is the part 2 for the wiring?
@subearu Жыл бұрын
What a beast!
@CaldoBuilt Жыл бұрын
Awesome work brother! Im really liking those vibrant HD clamps.
@89autoworks Жыл бұрын
Yeah they look pretty hot! Thanks sir!
@dill4583 Жыл бұрын
Way too cool man. Thanks for everything
@donwest5387 Жыл бұрын
"not the most amazing thing to get to"?
@donwest5387 Жыл бұрын
I had no issues with my 02 wrx steering over 14 yrs.
@bigredwrx4313 Жыл бұрын
Didn't see the install of the rack
@goblinphreak2132 Жыл бұрын
Piston shown clearly has overheating spots on it. Ringland failure is from lack of lubrication. aka low oil. The ej25 oil path has cylinder 4 being last to get oil, even the turbo is lubed before cyl 4. Low oil means more friction means more heat means ringland failure. 100% user error. These Subaru kids never check their oil level and it shows. Owned an 05 STI for 100k miles and had 0 issues. even did light mods like intake/exhaust with cobb accessport tune. Still no failure. "Well you were lucky" no i made sure to keep and eye on my oil level instead of being a fucking idiot. Subaru owners drive their car like they stole it but wont do proper maintenance and upkeep. and no i didn't "drive like grandma" and i also had many track days. Its the same story with honda s2000 rear ends. Its claimed "they can't handle launching or drifting, they always break" no idiots leave bad oil in the fucking differential which cant properlu lubricate the gears and this they overheat and break. I drove my 06 s2000 like i stole it, drifting on ramps and off ramps daily, even drifting backroads when no one was around. my diff never shattered. "Oh it will" the idiots claimed. More than half the issues people claim is common only have one thing in common, human ignorance and stupidity. The lacking of common sense.
@fabrb26 Жыл бұрын
Three time it happened on my Civic , i conclude engine produce too much torque. 😃
@operationcrazy2696 Жыл бұрын
Bought a legacy pzev 2012 with a blown ej253, the gt come with a 255, yall think i can put a 257 into it?
@operationcrazy2696 Жыл бұрын
It has a bad wiring harness and ecu, I'll need a new hood. Lmk what yall think
@89autoworks Жыл бұрын
If you where to swap the bulkhead harness, ecu, complete motor. I’m sure it could be done. But straight back to the age old saying, just because you can doesn’t mean you should. Ej257 are veryyyy expensive fyi. Good luck either way, let me know if you go forward with it and need any help.
@edwinvalles9313 Жыл бұрын
Im new here, this thing a 2.0?
@89autoworks Жыл бұрын
Nope, Rocketwagon has a hybrid ej257/ej205. Utilizing H20B heads, chamber matched to b25 heads, with a forged 257 short block