@@Tony-o1b great build quality overall really good barrel that shoots accurately with a wide range of slugs Regulator is very good with a very fast recovery time rifle is also very back yard friendly with factory installed shroud thanks for watching

@@quyenbao3880 the barrel that came from the factory it didn't have any marking on it but their barrel are awesome

@@AfricanAirOrdnance Is the barrel supplied by Alfa?

@@quyenbao3880 It could be or it could be a CZ

@@PCP_HUNTER_UK nice solid PCP great quality for the price thanks for watching

JSB seldom let one down thanks for watching

@@CJMann-zg6fu really is well made accurate ,consistent and budget friendly thanks for watching

@@rapalaron6348 no worries I've had springers since I was a young kid so I'm very familiar on how to hold the rifle during the firing cycle the rest I use allows the rifle to recoil back as it has soft foam backing that the butt rest against so it allows the rifle to recoil back 55 yards for a budget springer shooting just over 700 FPS is quite a ways to shoot. This rifle is not a high end Break Barrel like a Diana most videos reviews on these cheaper guns are shot at 20 yards and I did videos 20 .35 . 45 yard distance it was only at 55 yards that the group opens up which is what I expected it to do .I don't take your words as Unkind but just pointing out to you I'm no beginner when it comes to springers

@@AfricanAirOrdnance I was also shooting springer air rifles as a kid and i'm 59 years old now. I tried all kinds of gun rests and the recoil absorbed at the end rest will always affect the front stud with a solid, one piece rest like that. No problem with powder burners when the projectile already has left the barrel or a PCP with no recoil but i see the front stud moving with every shot. Some times more than the other time and that depends on the pressure you hold the shoulder piece against the end stud. The rifle should glide in the front stud but nothing works better than resting your leading hand on a sandbag using the artillery hold.

My thoughts exactly! Keep your hand dry and let the gun slide back-and-forth!!!

@@rapalaron6348 57 I'm 55 lol so congratulations to us making it this far in life. But that said the groups for this rifle were great up to 45 yards shot from the same rifle rest using the same technique which is to allow the gun to recoil. Backwards which is exactly the same as using the artillery hold again here are other factors playing into accuracy pellets that group tightly at closer distance don't group out further with break barrel if you look across many different review channels most shoot at 20 yards. Some out to 40 yard and very few 55 yards and further out there is a reason for this . other factors with break barrel accuracy using scopes is that on closing the barrel the barrel doesn't reset in exactly the same position each time. That's why Diana model 60 Target rifles that were break barrel design for shooting Olympic 10 meter have a locking leaver on the side of the barrel to ensure that after loading the barrel returns to exact the same position so if this issue would affect accuracy over 10 meter imagine over 55 yards. So accuracy issues are not just the way you hold a springer if that were the case then the accuracy I was getting with the rifle at 20 ,35 and 45 yards would have been affected

@@davidfranklin1885 I I agree I definitely make sure that that the pellet is completely seated to prevent the skirt been damaged when closing the barrel thanks for the advice and watching

@@AfricanAirOrdnance Give it a try with different pellets, and report on your webpage the results. Thank You !

@@Atheist66644 Thanks I thought it was ok but reading some of the later comments you would think that it was a shit show lol for accuracy sometimes I think folks are set in their ideas of what Is the best way to shoot a springer thanks for watching

@@AfricanAirOrdnance I owned many springers and for the price and useage you can get out of one they really are great

@@hashgirl1717 here is a video on the 257 but the process would be exactly the same for the 457 kzbin.info/www/bejne/hGG9poBjacyiprssi=f0v8KJ2_CL6RoXD1

@@CJMann-zg6fu definitely going to be getting in more springers love pcps but boy soringers are fun with not having to worry about all the extra gear thanks for watching

With the factory barrel they will tumble but if you switch to a 1 in 10 or 1 in 8 twist rate they will stabilise and Will fly straight

@AfricanAirOrdnance Thank you very much for getting back to me. What is the heaviest slug one can use with the std factory barrel?

@@borsaga9223 6 to 8

@@AfricanAirOrdnance Thank you.

@@philkennedy342 actually I dont have a firm grip on it I'm allowing it to recoil backwards my rifle rest has a soft rubber block that lets the rifle move back

@@glenhenning9261 true less hassle no carrying big scuba bottles around to refill old school fun

Good Day and thank you for your question and watching give this a look pelletgun.co.za/products/altaros-pressure-regulator-bottle-with-gauge then do a google search ffor a place close to you to buy it from

@@lv2bplayn I don't but this barrel is specifically for slugs. Does not shoot pellets with any accuracy

@@AfricanAirOrdnance From what I understand, the 700mm is unchoked. I can shoot the jsb 50gr decently enough at 925 with 600mm choked barrel but the 44gr are going too fast at 964. I hope agt’s next move is to make their models more adjustable friendly instead of having to remove the reg to adjust it. That held me back for a while in buying one. But now that’s not an issue as I have several airguns for different purposes. Thanks for the quick reply. Guess I’ll have to do the tape on the cleaning rod trick to get my twist rate. Cheers from USA

@@lv2bplayn Sadly on the New Uragan 3 they did not make the regulator externally adjustable, but they did redesign the whole valve system which is a good thing but I wish they would have made the regulator externally adjustable

1:18 twist for the .30cal. 600mm. I used the cleaning rod/tape trick and came up with 1:18.

@@robertskelton2576 lol 😂 it comes as a Suprise to people that white people also live in Africa. Here in South Africa there are roughly 5 million whites in a country of 65 million people

Actually, 20 yards to target is often the distance used for break Barrel testing that said in future videos will be going 35 ,45 and 55 yards with the Rugar Air Hawk here are just a couple of other channels that use 20 yards for testing Break barrels kzbin.info/www/bejne/Z5uWe3merdhll9ksi=VdTcgTIzhuFyB_MY kzbin.info/www/bejne/pWOZZICVr9B3fZIsi=ZnEZ-TrlVRAXTg5C

@@ralstonraz not sure contact Airgun Technology and ask them

@@phillipanderson3715 33 Gn or 40 gn slugs

@@Wickedstickyflowers best thing just shoot the gun untill the pressure is low the un screw the bottle shoot out all the pressure in the plenum then adjust the reg up or down

@@stevezweig5367 turn up the regulator to increase the reg pressure

the front of the plenum tube is machined out to the OD size of the regulator so the regulator can only go so far into the plenum

No BUT The U3 looks promising

@@debbies3763 Great Gun thanks for watching

@@andrefigueroa7315 you can use the same kit for all calibre if you have 25 cal or 30 cal then you only need to open the loading slot on the magazine back plate that comes with the kit. this is easy to do with a Dremel

@@AfricanAirOrdnance okay thank you ! Yes it would be for .25 caliber .

@@andrefigueroa7315 you can email your order to [email protected]

@@AfricanAirOrdnance will do thank you for your help

@@AfricanAirOrdnance Does the website still work ? That’s where I seen the kit or would it be faster / easier to just order via email ?

U have to remove the bottle then remove the front block that the bottle screws into then remove the front block from the plenum tube if you shine a light into the front block on the plenum side of the block way in the back you will see a Tiney Allen screw you will need a very long Allen key to reach it that screw holds a small Oring in place this Oring is what keeps the HPA from leaking back out once you bleed off to disconnect if it comes loose then it will let air leak out you just need to tighten it down

@@Premierslugs it's a spacer

@@AfricanAirOrdnance does the reg sit against it upto the valve , I Thought I saw in one of your videos the HP doesn’t have it

@@ProperRural the choked barrels don't really like slugs

My $300 jts airacuda standsrd shoots tighter at 55 yards.

Anti Clockwise

@@AfricanAirOrdnance many thanks for the reply

@@jhshootingandBiking70 anytime

@@laramiejordan4494 M4

No but I do cast slugs but these 34gn are from HN

Its from South Korea just trying out different slugs in this series I started the HN 34gn next will do HN 36gn and so on Keep in Mind the Koreans designed this as a hunting rifle shooting their hunting pellets not slugs defiantly not a designed for hitting thumb tacks but for rabbit and bigger sizes game which it will easily do

You can buy one from pelletgun.co.za/collections/25-6-35mm-air-rifle

Bom dia, se você gostaria de fazer o pedido, por favor, envie-me um e-mail para [email protected] sim, podemos enviar os kits de atualização para o Brasil

@@Piupiu68az if you flip the plenum around then it will change