Alpenfox

Пікірлер

@74GreyCat 8 күн бұрын

Can you tell me how to set up target capture only using TCS without radar?

@alpenfoxvideo7255 8 күн бұрын

@@74GreyCat I used radar! TMS left for PAM, lock and TCS lock, TMS down to refuse radar lock, TCS stays locked

@74GreyCat 8 күн бұрын

@@alpenfoxvideo7255 Brilliant! I finally managed to download the video. It has become almost impossible to watch KZbin in Russia.

@74GreyCat 8 күн бұрын

@@alpenfoxvideo7255 Brilliant! I finally managed to download the video. It has become almost impossible to watch KZbin in Russia.

@blackholecollider7333 11 күн бұрын

I don’t get it, please help me, SA-3 site, from 15000ft at 370knots I can’t hit, they fly over the site, even if I get the donut

@levibailey6256 5 күн бұрын

Same

@HighAspect 21 күн бұрын

Nice… jester is way too loud though. I like your voice attack setup, I need that for the 14 What are you doing to control the TID ? I have a mod to help make the text smaller on awacs, that is so annoying in VR

@alpenfoxvideo7255 21 күн бұрын

in the core files I copied the 2 lines from the jester's keybinds to the Pilot's Doesn't seem by the video, but I pan the TID around a lot Wow just found out about that mod! I'm getting it right now

@ascendiath 24 күн бұрын

Hey im amazed by your ingame quality, would you mind sharing your PC-specs and VR headset?

@alpenfoxvideo7255 23 күн бұрын

@@ascendiath PC: video workstation Intel i7 1370k Asus z790 pro art Nvidia RTX 4090 Oculus Quest 3 Virtual Desktop

@Falckodotcom 28 күн бұрын

Same problem here, 4090 with Pimax Crystal.

@noname2031-w5r Ай бұрын

You can zoom in VR ...

@alpenfoxvideo7255 Ай бұрын

zoom where if the plane is not rendered?

@Fiztex553 Ай бұрын

This is either MSAA or DLSS/DLAA. Try without any AA. It's been like that for ages with this game. You either pick no AA and don't see things because of all the shimmering, or you pick AA and loose object visibility vs background. Others solve this through model scaling and lighting but DCS community is strongly against all that since they mostly care about flatscreen where this is solved with zoom and supersampling. I switched to BMS VR and don't regret for a moment, best experience you can have in modern combat flight sims now if you are OK with flying f16.

@alpenfoxvideo7255 Ай бұрын

this is without AA, godlike resolution setting.

@Fiztex553 Ай бұрын

@@alpenfoxvideo7255 then it's even worse than it was. Nice progress as always, ED.

@Callsign_Spectre Ай бұрын

Spotting in VR has gone from way too easy to nearly impossible. Hopefully a middle ground can be found in there somewhere…someday…

@alpenfoxvideo7255 Ай бұрын

yes, at the moment I resorted to flying datalink jets like the tomcat...

@pyroscot Ай бұрын

Spotting in VR for me is great these days. DCS viewing distance set to high, 4090gpu and a Varjo Aero. In fact I see better than my buddys playing in 2d which never used to be the case. Do you have improved spotting enabled?

@Callsign_Spectre Ай бұрын

@@pyroscot 4090 here, pimax, aero, q3, and big screen beyond…no joy on anything more than 2 miles out. Maxed out everything and supersampled; 90 fps steady…nada

@Q3ark Ай бұрын

That is a great tutorial thanks! How did you get the tomcat to show in your VR hangar?

@solidsnakekillsu3783 Ай бұрын

hey are you using the quest 2 or 3 if you are useing the 2 how did you get the hands to work

@new_comment Ай бұрын

I've tried every tutorial, I can't get them to launch. All I get is detection tone, nothing beyond that.

@HobelDcs 2 ай бұрын

try 28nm shoots

@tequila6955 2 ай бұрын

that was very helpful. Thank you.

@ilankeren1449 2 ай бұрын

pretty sure the delivery mode should be set to loft. correct me if im wrong

@alpenfoxvideo7255 2 ай бұрын

@@ilankeren1449 that if you do a manual loft, with the parameters calculated by you

@callsignnictmere465 2 ай бұрын

Good tutorial i think it was the gloves, it all made sense to me. Thumbs up.

@alpenfoxvideo7255 2 ай бұрын

Hey guys, quick update: #1 keep the dive on the needles for few seconds and see if the calculated range is stable and makes sense. #2 16nm seems to be the hard limit for these if you drop them from 30k at mach speed #3 I was testing this with the SA-2 but somehow the range gets calculated way too short always (mk50 seekers) and the sparrows fall to the ground before acquiring the target... so the best way to get an SA-2 is with mavericks imo...

@Uploadvideoschannel 2 ай бұрын

what setting should be the flight director mode knob set to? its hard to see in this video..

@alpenfoxvideo7255 2 ай бұрын

@@Uploadvideoschannel leave it to computer, just rotate the FD keyer

@Uploadvideoschannel 2 ай бұрын

@@alpenfoxvideo7255 thanks!

@MrSunshine571 2 ай бұрын

Nice video! Can you share your PC specs? For VR your DCS looks great!

@alpenfoxvideo7255 2 ай бұрын

@@MrSunshine571 it’s an RTX4090, I don’t wanna brag about it too much, but that lets me render at full resolution with high settings

@MrSunshine571 2 ай бұрын

@@alpenfoxvideo7255 Ah I see, that explains it. I run a 4070TI and I cant get it to run well in VR. It either runs badly or looks horrible. :(

@alpenfoxvideo7255 2 ай бұрын

@@MrSunshine571 come on it still looks good I’m sure, just focus the rendering power in the cockpit at 70hz without reprojection. It looks miles better than FSX and VTOL ever did anyway

@MrSunshine571 2 ай бұрын

@@alpenfoxvideo7255 Im sure it is possible to get it to look right but the issue is I just cant be bothered lmao It takes a lot of messing about, changing settings etc to get it just right, I simply cant be bothered :D I was hoping this 4070 TI would just let me power through most of this stuff but it seems I would need a 4080 or what you have :(

@Braviation76 2 ай бұрын

What do you mean bit press and hold pickle ? Thanks for the tutorial

@alpenfoxvideo7255 2 ай бұрын

@@Braviation76 you have to keep it pressed all the way trough

@Braviation76 2 ай бұрын

@@alpenfoxvideo7255 okay thanks, but for me the AGM doesn’t want to move direct to the SA just in front of him

@Matt-tf1wz 2 ай бұрын

I can't get this to work lol

@alpenfoxvideo7255 2 ай бұрын

@@Matt-tf1wz try at least 6 times and check the Jtac, sometimes shrikes are tempremental

@oscarmike3028 Ай бұрын

I must have tried 8-10 times on ECW/HBCW. No joy so far.

@SmokinKipper 2 ай бұрын

Great video man thanks for making it. I thought SAMs were not on the front line on ECW? They must have changed this. Also, are you aware of if the A4 can also take these better Shrikes? EDIT: ah it was an airport!

@alpenfoxvideo7255 2 ай бұрын

I think enigma on this settings puts Strela-1 on the frontline. And the A-4 apart needing to be belly-up doesn't calculate a loft :C

@Deathtroll1499 2 ай бұрын

Anyone know the intro song?

@alpenfoxvideo7255 2 ай бұрын

@@Deathtroll1499 Go hard - Utopiia, bought from Artlist

@aries144 2 ай бұрын

I really enjoyed your choice of music. Great tutorial. I'm going to go try it now.

@shi4stone 2 ай бұрын

What hand control are you using?

@alpenfoxvideo7255 2 ай бұрын

@@shi4stone Oculus Quest 3 trackers, they’re not good at all… just because ED broke the controllers…

@Willykurtz 2 ай бұрын

If you want to make a good tutorial video, first of all never use VR. It very hard to understand anything while your head is shaking all around the cockpit. Maybe VR is very good for immerse yourself, but very uncomfortable to watch.

@kiubekpl5863 2 ай бұрын

If he simply uses openxr vr stabilization it would be actually pretty good

@alpenfoxvideo7255 2 ай бұрын

@@kiubekpl5863 what is that? i can find very little info on that

@kiubekpl5863 2 ай бұрын

@@alpenfoxvideo7255 Its in the openxr toolkit options, called overcorrection compensation or something, it basicly just smooths out your head movement making recordings look much better and zooming in much more bearable.

@6970s 2 ай бұрын

thanks man! this helped alot!

@scarface9478 2 ай бұрын

Great job, gonna give this a try next time I’m on. Thanks!!

@kagyroo 3 ай бұрын

your Vr settings look super good! what specs and hmd are you using?

@suecobandito8954 3 ай бұрын

One peek is worth a thousand scans...

@walterwatkins1762 3 ай бұрын

How are you using voice attack to change the aspect knob? Isn’t that in the back seat? My voice attack command switches to the back seat and it lags the game

@alpenfoxvideo7255 3 ай бұрын

I edited the default keybind files, copying those to the front seat. Waiting for heatblur to put jester commands for that.

@walterwatkins1762 3 ай бұрын

@@alpenfoxvideo7255 nice bro. Would it be easy for me to do??

@alpenfoxvideo7255 3 ай бұрын

@@walterwatkins1762 it is, those are just LUA lines

@UmbrellaXR 3 ай бұрын

@@alpenfoxvideo7255 Can you give us any guidance?

@Bull_10RR 3 ай бұрын

@@alpenfoxvideo7255 how does one even do that?