diezmon

Пікірлер

@luisgcasiquet 2 ай бұрын

I am considering that, because motors functionality ceased to work in mine. Aftermarket Flat mounts are extremely expensive!!

@diezmon 2 ай бұрын

@@luisgcasiquet yep. If you're at all handy this isn't so bad 😀

@luisgcasiquet 2 ай бұрын

great video

@sethngardner 7 ай бұрын

you have no idea how much this helped me. i was losing my mind with clear coats.

@diezmon 7 ай бұрын

Awesome! I'm glad it helped 🙂

@stevemack1742 8 ай бұрын

Just what I was looking for. Thanks (from the future,lol)

@diezmon 8 ай бұрын

I need to get back there 😊

@phantomcreamer 8 ай бұрын

I thought my motor was dead. Tried hitting the rest button but it wouldn't start. I eventually realized I wasn't pushing the reset button hard enough for it to click. Great video, glad I didn't hVe to do anything to mine yet

@diezmon 8 ай бұрын

yeah, it's always nice when you don't have to tear something apart to fix it.

@AndiusPandius 8 ай бұрын

This was *exactly* the vid I've been looking for, for over a week. The question now is can I take that stupid stick off without opening up the dishy??! Why aren't others doing it this way? Are they just Dremel deprived?!

@diezmon 8 ай бұрын

Glad you found it! I actually saw one other guy do it this way, which inspired me. This way is much better than the sloppy ragged edge you have to deal with when cutting 😀. Of course, They're making flat dishes now 🤦‍♂️

@AndiusPandius 8 ай бұрын

Hi @diezmon do you think it's possible to separate the pole from the motors with it still in the dishy? You had the motors in the vice and prized it off with a screwdriver in the vid. Wondering if it's possible to "push" the motors out some how with a smaller pole inside the dishy pole. Would have to deal with the cable & connector 1st though.

@diezmon 8 ай бұрын

@@AndiusPandiusI think it's probably possible. I remember it was really a pain trying to get that thing out without prying it with that screwdriver though. There's also a shroud over it that you can't remove until you take it out of that dish. That'll probably get in your way. You can see me slide that off once I have it cut apart

@jakamake 11 ай бұрын

I have the exact table saw, saw ran very loud and would trip off when ripping hardwoods, replaced all the bearings and drive belt and still very loud. Noticed yours is very loud as well, was it like that from the time you bought it?

@diezmon 11 ай бұрын

Yep. It's always been loud. It's always lacked a little oomph, and I have to go pretty slow with hard woods.

@sabotup7442 Жыл бұрын

I have two Kato N Gauge EMD F7’s (an A and a B) with MRC Sound decoders in them. I’m using the MRC Tech 6 and walk around handheld to run them. Can you tell me if it’s possible to turn the sound up on these? At the present, the sound is very puny… Any help is greatly appreciated. Kind regards, Bruce

@diezmon Жыл бұрын

They are generally pretty quiet,. Compared to the better sound decoders. But There should be a setting to turn up the volume though. Sorry,. It's been a while

@TravelerJerryLee Жыл бұрын

What speeds did you have before mounting it flat and what avg. speeds have you seen since posting?

@diezmon Жыл бұрын

It depends. I had some blockage/trees at home, so I'd see anywhere from 35-150Mbps. But once I was on the road I was seeing up to 300 👍

@DOSputin Жыл бұрын

Not bad!

@Grevlain Жыл бұрын

It hurts!! To see all that. lol. I think I'm just going to go with the brand new flat dish that is the same price as the articulated one. And it has a wider field of view.

@diezmon Жыл бұрын

Ya, they're finally coming out with more options. Did you try eye drops? 🤣

@Grevlain Жыл бұрын

@@diezmon 😆

@vickyfahey9358 Жыл бұрын

P r o m o s m 😚

@MrWyzdum Жыл бұрын

Seriously, how hard could it be? It's not like there's a lack of references.

@diezmon Жыл бұрын

Harder than winding a cable

@MrWyzdum Жыл бұрын

@@diezmon NOTHING IS HARDER THAN WINDING A CABLE.

@marcusagrippa8078 Жыл бұрын

Good job man! Enjoy your hard work. The world is your oyster now.

@kathrynarnold1966 Жыл бұрын

I can't say for there, but here (NC) I'd guess tree frog.

@kathrynarnold1966 Жыл бұрын

Oh! Now that was clever! No more stuffing the table "out of the way" somewhere inconvenient!

@Gallegos0 Жыл бұрын

could you solve it?

@diezmon Жыл бұрын

I ended up taking it to a tech. They replaced a couple caps, if I recall correctly

@skgb75 Жыл бұрын

Thanks for this vid!!

@diezmon Жыл бұрын

I keep forgetting this is out there. It's good to know that it's been useful for people!

@skgb75 Жыл бұрын

Def helpful. Only letdown is the flat krylon spray goes for like $30 online.

@diezmon Жыл бұрын

@@skgb75 $30? Yikes

@НатальяЗеленина-ч7р Жыл бұрын

Потрясает и завораживает эта мощь и красота!!!!!👍👍👍

@joellenbroetzmann9053 Жыл бұрын

Thank God for the new bridge!

@tenlittleindians Жыл бұрын

Looks fairly mellow. By the time that water crests here in Iowa it will be the opposite of "still water".

@Eric_Von_Yesselstyn Жыл бұрын

Acrylic... No

@taviaturner3070 Жыл бұрын

Thank God for snow blowers!! OMGosh!

@VUKKING-t4e Жыл бұрын

Cool video 📹

@diezmon Жыл бұрын

Thanks!

@waraddar 2 жыл бұрын

Smart! Thanks!

@diezmon 2 жыл бұрын

You're welcome!

@brucybabyy7355 2 жыл бұрын

Where is this?

@diezmon 2 жыл бұрын

This was in Minneapolis :)

@VUKKING-t4e 2 жыл бұрын

Beautiful ✅️ 😍 🤩

@ILoveTrains 2 жыл бұрын

Great videos of the lights of the Canadian Pacific Holiday Train!

@taviaturner3070 2 жыл бұрын

I literally bought an annual pass on this day.

@diezmon 2 жыл бұрын

I figuratively bought one!

@taviaturner3070 2 жыл бұрын

Why didn’t you call us, man?!?

@diezmon 2 жыл бұрын

I didn't want to be slowed down! 😂

@taviaturner3070 2 жыл бұрын

@@diezmon 😂

@angelgarcias8219 2 жыл бұрын

You pain it the car how much time need to way put the clear you got number the color clear the links thank g jod

@og_carritos5305 2 жыл бұрын

Gracias por subir la comparación de los spray

@siochair1013 2 жыл бұрын

Flame thrower? Really? 🤪

@diezmon 2 жыл бұрын

hell yeah. easy peezy!

@snehal_artist7789 2 жыл бұрын

👌👍

@LillDaryl 3 жыл бұрын

It's all fun and games until you see a flash of light before you see the potato....... LMFAO!!!

@gregshore7772 3 жыл бұрын

Can you spray the krylon over oil based rustoleum? I am going for a matte or semi gloss look.

@diezmon 2 жыл бұрын

I've sprayed on top of all kinds of brands/finishes. Maybe just do a test piece first?

@NickandRachel 3 жыл бұрын

Nice!

@robertdicarlo4490 3 жыл бұрын

I can't remember why I subscribed to your channel, but this is why I'm stayin'. Rock on!

@diezmon 3 жыл бұрын

It had to be either guitars or vans :)

@zzgordoxzzgaming4718 3 жыл бұрын

thanks man good thing I don't buy a spray paint color because I already have the gloss paint on a plastic just needed to make it mate finish 🙌🏼👏🏼👏🏼👏🏼 Does the Krylon ColorMaster Acrylic Crystal Clear, Flat & Tamiya clear flat are UV Protection?

@DANNYtheBOY11 3 жыл бұрын

Thanks for the video, would it be ok on glossy cardboards of some tabletop games? They are too shiny and I cannot see while playing when lights are involved (99% of the times).

@Lunarpollo5622 3 жыл бұрын

Are all flat/matte *spray* paints resistant to water?

@henchmusic5878 4 жыл бұрын

Floyd the barber? Merry Christmas.

@davidschutte9167 4 жыл бұрын

Ben zelf beginner modelbouwer vind tamyia verf wel duur

@johnfrewin7717 4 жыл бұрын

Good job, hope my first time goes as well👍🎸🇬🇧

@diezmon 4 жыл бұрын

It was still nerve wracking 😁

@mark64tanner 4 жыл бұрын

👍✌😎

@cymonfeliciano7476 4 жыл бұрын

Is flat clear coat and matte coat the same?

@diezmon 4 жыл бұрын

yeah, i actually learned more after posting this. They're not the same. Matte will still have a little bit of sheen to it. for zero sheen/gloss, you want flat.

@ChrisFranklyn 4 жыл бұрын

"I'm going to do the fretwork" *gets out table saw* WOAH THERE! What are you doing?! :) (Ah, making the leveling blocks...)

@simonnotthepieman1581 4 жыл бұрын

I was patient... Nice bench! Subscribed

@diezmon 4 жыл бұрын

Thanks :)

@sidewinderguitars3034 4 жыл бұрын

I joined for fun too. I just want to make the best kit guitar I can.

@pvdguitars2951 4 жыл бұрын

Nice to a Les Paul after zillions of telecasters! You almost make me regret I didn’t enter the contest. This was my summer project: kzbin.info/www/bejne/aYateXyOmc17sJY

Ең жақсы KZbin

Пікірлер