Пікірлер
@angelmagana638
@angelmagana638 29 күн бұрын
What did you connect the red and black cables that came with the jumper cables from auto harness ? I know the red was for the remote turn on for the amp , what was the black wire connected too ?
@Colin_Slade
@Colin_Slade 19 күн бұрын
black is chassis ground.
@shojay9270
@shojay9270 Ай бұрын
Hey thank you for this video and great job on the install. I have a question, does your WRX have the factory Harmon Kardon premium audio? I was just wondering where you are getting your audio signal from. I am assuming you are getting the signal from your cars factory amplifier in the head unit? Just curious. Thanks again.
@variantaero
@variantaero Ай бұрын
@shojay9270 no, I do not have the HK system. All powering and wiring etc is on the video
@illektronikz
@illektronikz Ай бұрын
Thank You, Thank you, Thank You!
@coleschettle6494
@coleschettle6494 2 ай бұрын
Why not just tap into the rear speakers and run off that no need to remove head until lol
@variantaero
@variantaero Ай бұрын
@coleschettle6494 if you want to run wires to your rear doors, go for it. Our cars don't come with normal rear speakers above the trunk
@LucIn724
@LucIn724 2 ай бұрын
For any one with a sunroof, the plastic grommet shown is the sunroof drain.
@benwert7127
@benwert7127 2 ай бұрын
Hey did you notice your headlights go dim ever since you’re connected to the main battery
@variantaero
@variantaero 2 ай бұрын
@benwert7127 no that's no issue for me
@RonnyWilson541
@RonnyWilson541 2 ай бұрын
The red power wire “amp turn on” is where you connected your remote wire? Did you connect the blue wire from the kicker box as well or just straight from the red wire on harness?
@tubbsharper754
@tubbsharper754 2 ай бұрын
Well there goes the warranty lol also none of the wires will fit in the wrong spots
@variantaero
@variantaero 2 ай бұрын
@tubbsharper754 this doesn't interfere with your warranty as you aren't doing any modifications that affect it. No cutting wires etc.
@sunwhosaywat
@sunwhosaywat 3 ай бұрын
Is the head unit harness setup the same in a Base model?
@alecjoseph5135
@alecjoseph5135 4 ай бұрын
Just picked up an AFD V1 wing w/ the paint issue they have from the supplier… gonna tackle this project over the weekend! My only question is .. how many cans of base paint did you buy? Figured 1 is enough but if I need 2 i def want to have enough for the project before I start! Great video & super informative! Sweet VB btw 💪🏻
@waybach
@waybach 4 ай бұрын
B-E-A-UTTTIIFULLLLL 👌 by chance are you in SC? hehehe need someone to do this to my CW VB
@variantaero
@variantaero 4 ай бұрын
@@waybach no, I'm in OR
@333demigod
@333demigod 5 ай бұрын
Have you guys made Wing Stabilizers for the Type R wing on the VB WRX? Thx.
@variantaero
@variantaero 5 ай бұрын
@@333demigod no, we have not. Still need someone with one to make them with
@DeeMannMusic
@DeeMannMusic 6 ай бұрын
What wing is this?
@JBD1994
@JBD1994 6 ай бұрын
Everyone, please fuse the power wire to your amp!! Easy addition that could save you and your equipment! Not sure if you added one or not
@variantaero
@variantaero 6 ай бұрын
Yes, always add a fuse! Mines shown on another video
@billsanter
@billsanter 6 ай бұрын
There is another grommet underneath the fender liner that comes out a little higher so you don't have to cut a hole in the insulation. I did remove the grommet to drill it out and poke my wires through. I noticed you didn't show the reinstall of the fender liner which I found to be a real hassle.
@variantaero
@variantaero 6 ай бұрын
Mines the cvt so I don't have that rubber grommet. That being said, the reinstall process is pretty simple so I didn't include it since I already included the removal of it
@billsanter
@billsanter 6 ай бұрын
@@variantaero So I guess the liner pops right back on for you. I had a hell of a time getting one of the holes to line up.
@variantaero
@variantaero 6 ай бұрын
@@billsanter yea, everything has its place and you have to pay attention to what goes where. If you got that, then it's very easy to put back.
@44actual
@44actual 6 ай бұрын
There are places on this where there is gap between the stabilizer and wing. 6:31 How much should there be?
@variantaero
@variantaero 6 ай бұрын
What wing do you have exactly?
@44actual
@44actual 6 ай бұрын
@@variantaero import image racing. I will be putting my stabilizer on before the weekend is over.
@variantaero
@variantaero 6 ай бұрын
@@44actual I see. If there are gaps, then it's because our stabilizers weren't designed for your wing. There are only a couple wings they were specifically designed for so you may need to do a little bit of trimming to get it to sit how you want
@44actual
@44actual 6 ай бұрын
@@variantaero hopefully it will work out. I made sure to order the correct stabilizers as listed on the website.
@mikez5740
@mikez5740 7 ай бұрын
How was removal and installation?
@bakedpanda6502
@bakedpanda6502 7 ай бұрын
I used this video only for the link for the harness. You won’t believe how hard it is to good a harness for a 22+ wrx. Your link saved me 😂
@variantaero
@variantaero 7 ай бұрын
Glad I could help!
@stinkothestooleater4490
@stinkothestooleater4490 7 ай бұрын
You can tell it's a good tutorial when there's tens of thousands of views, but little comments. Tells you that people were able to do the install with little to no problems. People are usually vocal about issues and problems
@McRex203
@McRex203 7 ай бұрын
Part #?
@variantaero
@variantaero 7 ай бұрын
No idea, I just asked the desk at a local dealership
@TheBrawlmastah
@TheBrawlmastah 9 ай бұрын
What's that aftermarket shift knob? I've never seen one of those in a WRX. How much did you pay to get it installed or did you do it yourself?
@losthope483
@losthope483 9 ай бұрын
The material the same as the car?
@variantaero
@variantaero 6 ай бұрын
What do you mean? Metal? Plastic?
@foreign9626
@foreign9626 9 ай бұрын
They fall off yet?
@variantaero
@variantaero 9 ай бұрын
Nope, still on there as strong as ever
@foreign9626
@foreign9626 9 ай бұрын
@@variantaero bet was debating on them for mine. Appreciate the response
@cesarcuevas9669
@cesarcuevas9669 10 ай бұрын
It looks the same as the crosstrek. Have someone try it on a 2024 crostrek already?
@variantaero
@variantaero 9 ай бұрын
If they have, I haven't heard anything. I'm assuming they are the same since all the Subaru cars after 2022 are on he same "global platform"
@tonystewart200000
@tonystewart200000 10 ай бұрын
Great job on this car. Looks amazing!
@variantaero
@variantaero 9 ай бұрын
Appreciate it 🙏
@davidjpeacock
@davidjpeacock 10 ай бұрын
How did you deal with the texture on the fender flares? :-) Thanks for the video, this is inspiring me to have a go at this myself. Those Aeroflow parts are so expensive!
@variantaero
@variantaero 9 ай бұрын
Sanding them is the same as on the rear bumper. Just follow those same steps
@lawrencesykkmon2064
@lawrencesykkmon2064 10 ай бұрын
do you have a video on how to remove the rear bumper?
@variantaero
@variantaero 10 ай бұрын
No but it's pretty easy to do. I might have to make one, one of these days
@JohnnStamos
@JohnnStamos 9 ай бұрын
@@variantaeroCanyou take off just the black textured part ? Ty
@variantaero
@variantaero 9 ай бұрын
@@JohnnStamos no, it's all one piece
@JohnnStamos
@JohnnStamos 9 ай бұрын
@@variantaerothank you. Beautiful build man!
@walksg2411
@walksg2411 10 ай бұрын
Where did you get the new bumper from? Just a dealership in your area ?
@variantaero
@variantaero 10 ай бұрын
Yes, a local dealership
@ROKstarz99
@ROKstarz99 11 ай бұрын
Show us the end result!
@Blubarru1
@Blubarru1 11 ай бұрын
How goes it? Has it flaked? Have you done the fender flares?
@variantaero
@variantaero 11 ай бұрын
Did the entire car and no issues. No flaking, nothing. As long as you do the proper prep, you'll be golden.
@generivera28
@generivera28 11 ай бұрын
automatic is a sin
@variantaero
@variantaero 11 ай бұрын
Glad it bothers you so much
@Bustercherryy
@Bustercherryy 11 ай бұрын
only sin here are the subs. that’s for high schoolers lol
@solorzanofelipe
@solorzanofelipe 11 ай бұрын
Couldn't you tap the signal from the stock subwoofer to the line output converter. Not sure if all wrxs come with a sub but mine does.
@variantaero
@variantaero 11 ай бұрын
No stock subwoofer in mine
@jakej.9192
@jakej.9192 Жыл бұрын
Is it possible to tap into the stock wiring? Like do the wires come out more so that you can tap into them?
@retloc
@retloc 3 ай бұрын
Did you ever find out?
@jakej.9192
@jakej.9192 3 ай бұрын
@@retloc yeah lol I tapped into the stock wiring harness and it worked
@retloc
@retloc 3 ай бұрын
@@jakej.9192 Just used an loc for the rear speakers? I’m looking to do it on my 24 i’ll be getting thursday
@jakej.9192
@jakej.9192 3 ай бұрын
@@retloc exactly, you’ll have to remove some of the black tape to access the wires and then your golden.
@retloc
@retloc 3 ай бұрын
@@jakej.9192 perfect, i did it with my friends mazda3speed a week ago, just don’t know if it’s different since he had an amp, so just to check again, i take head unit off, peel some tape back, tap into rear speaker wires with the loc guide or whatever, and then connect those rcas to my amp and such
@atumanov55
@atumanov55 Жыл бұрын
Do you need the harness? Or can you just splice into the existing speaker wires? I ordered a powered subwoofer (no separate amp) and am trying to figure out the best way to install it
@variantaero
@variantaero Жыл бұрын
the best way would be to get a harness. If you want, you can just tap into your cars harness but you risk damaging something.
@atumanov55
@atumanov55 Жыл бұрын
Why not run it through the firewall grommet?
@variantaero
@variantaero Жыл бұрын
There isn't one on the cvt wrx
@328beam3
@328beam3 Жыл бұрын
Do you have a link to the wing you purchased?
@variantaero
@variantaero Жыл бұрын
I just purchased mine off ebay. From a seller called autumnwish_autoart
@law22inoc
@law22inoc Жыл бұрын
That MTX Sub looks like it went to the moon and back!
@variantaero
@variantaero Жыл бұрын
Had it since 2010 lol
@seanguyette2493
@seanguyette2493 Жыл бұрын
Do you have a video or photots of where you connected all of your wires into the harness for tapping?
@variantaero
@variantaero Жыл бұрын
Just of whatever is on this video.
@seanguyette2493
@seanguyette2493 Жыл бұрын
Where did you get the wire that goes to the mirror to add the heating element? I dont have heated mirrors on base 22 and i live in vermont were its cold and snowing a few months a year.
@variantaero
@variantaero Жыл бұрын
This video is actually on a 2015 WRX. I don't know if they are similar for the 2022's. If you have the base, the most likely you'll need aftermarket mirrors that come with the heating element and will need to wire them up yourself.
@mohammadahmadtallouj8243
@mohammadahmadtallouj8243 Ай бұрын
My friend has a 2021 Camry that does not have factory heated mirrors and I want to modify it. Is it possible to pull two wires from the rear window and connect them to the new mirrors?
@dcoiman
@dcoiman Жыл бұрын
So glad someone finally made a video about this. I’ve had the materials in my garage for months now I’m trying to block off some time to take care of the rear and front bumper. I did paint match my own fenders, but for some weird reason the paint companies sent me a mid coat, which I didn’t notice until I was completely done kind of made the ceramic white a little yellow and sparkly. I ended up ordering a set from Aeroflowdynamics.
@variantaero
@variantaero Жыл бұрын
That's actually kind of funny. The same thing happened when I painted the rear bumper for the first time, although they sent me an even more bright white color that of course, I didn't notice until it was done and on the car.
@seanguyette2493
@seanguyette2493 Жыл бұрын
Where did you connect the blue wire?
@Kush2020
@Kush2020 Жыл бұрын
100% epic. Glad I watched this video.
@NessmanDavid
@NessmanDavid Жыл бұрын
Helped me big time thanks!
@carlosdmexican
@carlosdmexican Жыл бұрын
best thing about this is that when you get tired of it you can just rip it off, keen to get one for myself you make it look so easy putting em on haha
@jadaliz3
@jadaliz3 Жыл бұрын
So from what I can see did you tap into your rear speaker wires? Just asking cause im not using the harness and teyin to figure which speaker wire is throwing out the bass?
@variantaero
@variantaero Жыл бұрын
Yes, using the rear speaker wires.
@TheDeathHusband
@TheDeathHusband Жыл бұрын
clean af! nice job
@felixlaboy1453
@felixlaboy1453 Жыл бұрын
Great video. Do you have the navigation modal or none navigation. I have the premium model with 11 inc screen but not the Harman speakers. I don’t think I have navigation. I feel so dum not knowing if I have navigation so I don’t know witch harness to buy.
@variantaero
@variantaero Жыл бұрын
You have the non navigation model. That's what I have too
@felixlaboy1453
@felixlaboy1453 Жыл бұрын
Yes non navigation
@markbell5483
@markbell5483 Жыл бұрын
Stupid question the top visor part above the radio does that come off on its own?
@seanosullivan2694
@seanosullivan2694 Жыл бұрын
When I did this on my 2014, I did it in the reverse order, fed the short end of my power cable into the grommet from inside the car, then I used a coat hanger to grab the cable and pull it into the engine bay. This method is def cleaner, and might be necessary to get through the grommet cleanly. On my old, I just shoved a screw driver through it and jammed the cable through lol. Great video though, this is absolutely helpful.
@vettedsin
@vettedsin Жыл бұрын
did you go back and wetsand again because of the orange peel?
@variantaero
@variantaero Жыл бұрын
no, it wasn't too bad in the end so I just left it.