Yes, it totally helped us see what to do. Thank you!
@HandymanStratforduponAvon4 күн бұрын
Glad it was helpful!
@tonycavanagh192919 күн бұрын
Give a proper review dont buy it.
@tonycavanagh192919 күн бұрын
I binned it as a bad job. No more ordering of the net.
@bjelfin21 күн бұрын
Thanks for this. I just bought one and couldn't find the instructions.
@GavTaylor-tiktok-gavtaylorАй бұрын
Some tradespeople and handypeople ( putting people and not men as not to offend them identifying as tradestoasters lmao 😂😂) don't understand why it's important to be clean and tidy whilst working, again top tips 🙃
@GavTaylor-tiktok-gavtaylorАй бұрын
Top tip thanks 🙂
@HandymanStratforduponAvonАй бұрын
No problem 👍
@philippegertiser5888Ай бұрын
Thank you very much. Very helpful
@HandymanStratforduponAvonАй бұрын
Glad it was helpful!
@4288ZiaАй бұрын
Thank you so much! 🙏🏼👍🏼🙌🏼
@matejbilic1909Ай бұрын
What abbout other side?
@stratfordwindowblindsАй бұрын
The other side of what?
@stugt2 ай бұрын
Looks tidy , but rain will get in and rot the chip board
@HandymanStratforduponAvon2 ай бұрын
It doesn't because felt hangs past the wood so the water can't get near the wood.
@RD-dl9ms2 ай бұрын
Most advice I've seen suggests tucking the felt under the eaves. That doesn't seem to be possible as the corner prevents the felt from folding under the eaves timber.
@HandymanStratforduponAvon2 ай бұрын
You are right and even if you can do it it looks awful. I let my felt go just over the edge so that rain water cannot soak into the timber
@RD-dl9ms2 ай бұрын
@@HandymanStratforduponAvon Well... I surprised myself by being able to do a "blanket fold" at the corner, which enabled me to leave it long at the gable side but tuck it under at the eaves. Still not sure how I managed it but it looks very tidy. Time will tell.
@Woodkin0072 ай бұрын
If you drive me a car at night and you're not sure what's ahead of you try turning on your lights
@Blawg-the-destroyer2 ай бұрын
Someone actually fixing something correctly not into to joints for ones.
@cradlefive2 ай бұрын
Some people should never attempt diy.
@Likeapsychotic2 ай бұрын
If you’re not sure if your car will start, insert the key into the ignition and try to start it, then you’ll know if your car will start.
@skinwhiztle2 ай бұрын
This man's a genius. Why didn't I think of that
@petergalashan33042 ай бұрын
Thank you
@iamthetinkerman2 ай бұрын
Fuck me well done Einstein 😂
@bobthenob90172 ай бұрын
if you needed this tip then heres another one for you, stay at home 😊
@lionelspencer-ward35272 ай бұрын
Also don't stand in a bucket of water when plugging your electric drill in! Stay tuned for more DIY tips for the mentally challenged...
@jimsyoutubechannel68182 ай бұрын
You ledge. Thanks for this
@ThomasB-ji5sz2 ай бұрын
Hey, did you hear that Woody Hyezmar is giving his collection of projects at no cost at all? Go'ogle his latest material, there's a similar project, pretty close to this one, if I'm not mistaken.
@jezebabe3 ай бұрын
Hi Nick, Thank you so much! 👍 I have been trying to work out how to remove one of our curtain rails but, until now, have drawn a blank. Yours looks identical to mine. I had already worked out how to remove the end caps but had assumed that the centre piece would slide out, so when it didn't I was back to the drawing board 🤦♂
@HandymanStratforduponAvon3 ай бұрын
Happy to help!
@MASSMAHEMMAKER13 ай бұрын
i am now dead
@BroonParker3 ай бұрын
I never thought that drilling a hole in a wall would bring on the apocalypse! Not safe for epileptics.
@gary83063 ай бұрын
These are really comfortable. Problem is where you sit on it, it wears through.
@whomadethatsaltysoup4 ай бұрын
Good to finally see a review of this pole. I bought one in 2018 for a job I was on and then went out and bought another with a full roller kit. Absolutely brilliant piece of kit - great for applying floor paint without developing back pain. The job I'm on now requires a longer pole, and I just wondered if the longer version was as good as its little brother. All you get on KZbin is Purdy this and Purdy that. I'm not a professional decorator, so don't want to spend a fortune on something I'll only rarely use, but by the same token, I don't want to buy something cheap that will fall apart on the first outing. Thanks for taking the time to share your experience with these tools.
@HandymanStratforduponAvon3 ай бұрын
Yes the longer one is good as well
@mikegriffiths43004 ай бұрын
Many thanks for the video you have done. I had no instructions at all. But there was a QR code I scanned with my phone, and I got nothing, so i You Tubed it and you came up, brilliant thank you again.
@awaywegrow61144 ай бұрын
I'm just about to re-felt 2 sheds for the first time. From what I understand it's not advisable to leave the old felt in place as it could compromise the new felt? Also, the old felt may have soaked up water and to leave it on would trap damp? I appreciate your video as your advice is very useful, but may I suggest using a tripod? 😉 Kind regards.
@HandymanStratforduponAvon4 ай бұрын
Its best to remove all felt and all clouts before starting.
@HandymanStratforduponAvon2 ай бұрын
As long a s the weather is dry and you have checked there are no previous clouts sticking up you should be fine. I f the felt is not in good condition, remove everything.
@Steve191054 ай бұрын
What were they thinking with that short cord that it has? I have one too and its just a pain trying to reach everything on even a fence panel.
@jlnaturo16694 ай бұрын
Thanks from 2024, Canada
@HandymanStratforduponAvon4 ай бұрын
Glad to help
@R14DSR4 ай бұрын
I ordered 3 boxes - no instructions present. So thank you!
@HandymanStratforduponAvon4 ай бұрын
Glad I could help!
@hannahadams72465 ай бұрын
How far apart are the holes?
@HandymanStratforduponAvon5 ай бұрын
No idea this was fitted for a customer 3 months ago.
@cookiemonster-qk5is5 ай бұрын
Thank you
@HandymanStratforduponAvon4 ай бұрын
You're welcome
@kamilwalkowski6 ай бұрын
Hello, I have a question: do you know how to break it down into parts? I have a problem with removing the hinges
@HandymanStratforduponAvon6 ай бұрын
I think they were just held on with 5 screws each
@catherinesearby55606 ай бұрын
It would have been better if you had someone else to do the filming ? Helpful though
@HandymanStratforduponAvon6 ай бұрын
Indeed but I film at work and I work by myself
@AhJodie6 ай бұрын
OMG, your video came along right when I need it! I subscribed and went right to the link to order some of this. I haven't tried it yet but looked at videos of it working and listened to the reviews and comments and seen some pictures. I have a spot in a bathroom that would be a nightmare to work on and am going to try this first! Love to you and I hope you have many years ahead of you filled with love, happiness and wealth!
@HandymanStratforduponAvon6 ай бұрын
Glad I could help!
@photodom20006 ай бұрын
This saved me a trip back to Dunelm Mill. Included instructions are pretty rubbish. Thank you.
@HandymanStratforduponAvon4 ай бұрын
Glad it helped!
@jp52106 ай бұрын
Are the shelves adjustable or do they have to go in a certain height ?
@carolynb.74557 ай бұрын
I usually manage pretty well assembling e.g. IKEA type furniture, but the diagram instructions enclosed with this shelving were poor and confusing. Thank you for a really helpful video showing and describing the steps so clearly! Shelves well on the way to completion now.
@HandymanStratforduponAvon4 ай бұрын
Glad it was helpful!
@primavera777 ай бұрын
Thanks Nick 🙏👐my Set came without instructions 😂 your literally a life saver
@tonyiar99067 ай бұрын
Thank you for posting this assembly video. Your instructions (walkthrough) were easy to follow. I appreciate the breakdown of each piece, by piece. I'm grateful I came across your video (I was completely lost by 'so called' manual). So, again, a huge thank you😊
@HandymanStratforduponAvon7 ай бұрын
Glad it helped you
@BilliesCraftRoom7 ай бұрын
Hi Nick, this looks like mine. I am trying to work out how to undo the screw that locks the first book to stop curtain coming off the end of the rail. Please can you share any tips, It's a straight screw but how do I undo it when it's at the rear of the track and only 20 mms gap? Thanks for this video., Really well explained
@HandymanStratforduponAvon7 ай бұрын
Difficult without a picture of yours but some rails have plastic brackets with a small swinging arm that you swing into the vertical position and this frees it from the bracket. Then you can pull it away to get to the screw. You can always email me some pictures. [email protected]
@annabeebank8 ай бұрын
I tried twice and failed . Ended up putting my old fitting back up . Decided to search for the instructions and found you so many thanks I’ll try again tomorrow
@HandymanStratforduponAvon7 ай бұрын
Happy to help
@rorymax82338 ай бұрын
Very helpful, thank you.
@HandymanStratforduponAvon7 ай бұрын
You're welcome!
@WayneBoucaud8 ай бұрын
Your a lifesaver!
@NilsThrasher8 ай бұрын
Yes buddy, it helped a lot. Thank you and have a nice one! Greetings from Italy
@HandymanStratforduponAvon8 ай бұрын
Glad it helped!
@m.70548 ай бұрын
Does it kill the worm that hides in the rottenness?