Thank you for your message. Please send an e-mail to: [email protected] and describe your problem in more detail. Thank you very much.

Hello, Thank you for your interest about our products. Here you will find demonstration videos of our treatment units and our simulation unit: kzbin.info/www/bejne/f6C1pX-knqtre6c kzbin.info/www/bejne/Z2WahWR4mJitgs0 kzbin.info/www/bejne/jJqYe3afbbF5es0 You can find more videos about our product range on our KZbin channel. I hope this helps you. Your KaVo Dental Social-Media-Team

Hello, to get the real bur speed shown on the display, you have to implement the gear ratio in the set up position of the different position. But you have 5 positions, you can choose. So set up your system for 5 different handpieces and you select the defined position to the handpiece. If you will only see the motor speed, you set your system to gear ratio 1:1. You can find more details in the user manual of the ELECTROmatic TTM or the short instruction sheet. You can find it here: www.kavo.com/en/services/kavo-download-center

@@KaVoDentalGmbH Can you have a high and low speed (one on each motor) connected and switch from one to the other without having to touch the screen to tell the machine to switch?

@@clorofenol Yes, this is possible with the TMM Version with two motors. You need therefore two turbine-tubes from the Treatment unit and you hang the two motors into the Treatment-unit position where the turbine tubes were place. When you pick Motor one, the Treatment set the turbine tube 1 and when you push the foot pedal, the turbine tube 1 gets power. ELECTROmatic recognize that the connected turbine tube pas power and give electricity to the motor 1. The same process for the Motor 2 with the Turbine tube 2. If you need more assistant, the regional sales rep could help you.

In order to get support in your country, please complete the form you can find on this webpage: www.kavo.com/es-la/contacto

Sorry, this was a Borden Turbine and we had the SMARTtorque S608C till 2021 in our program. The only opportunity is to install an adapter from Borden 2-hole to Midwest and use then the 4-hole Midwest Coupling versions SMARTtorque S609C (standard Head size) or a mini version SMARTtorque S605C(mini Head size).

Merci beaucoup

The QUATTROcare is used for oil care of your instruments. Depending on the instrument and the instructions for use, we recommend lubrication of your instruments after each cleaning and disinfection. During long treatments, it is advisable to also care the instrument in between. If you are dissatisfied with your device and the amount of oil used, you are welcome to contact our service department with your concerns: [email protected]

You can place the dosimeter on the sensor. There is a fluorescence tool included when ordering the Cephalostat option, this helps the positioning.

Please contact your local dealer. You can find our dealers here: www.kavo.com/en/services/kavo-dealers-worldwide

If only one instrument is equipped, the spray can lasts 361 cycles on average. If several instruments are equipped, then the can lasts correspondingly less long.

This movie shows the KaVo air-motors and the old KL701 and KL702 motors.

We're sorry to hear you're having problems! Get support here: www.kavo.com/contact-hotlines-0 Your KaVo Dental Social-Media-Team

Hello, Thank you for your request. The video was created based on the instructions for use. Could you please tell us the exact time in the video that you mean? To clarify the question we should be sure that we understand the question correctly. Thank you. Your KaVo Dental Social-Media Team

Hello, Thank you for your interst about our products. In order to get support in your country, please complete the form you can find on this webpage: www.kavo.com/contact-hotlines-0 Your KaVo Dental Social-Media-Team

😀